After replacing the iPhone 5S display, an apple is lit. IPhone does not turn on, the apple is burning - what to do

Such a problem, how "the apple burns and turns off" - the frequent phenomenon of iPhone ownerswho use the jailbreak (operating system for hacking extended phone capabilities). This problem occurs when a reboot or a conventional system failure of a smartphone. Be that as it may, the owner will have sophisticated way Returning your "friend" in a normal state with minimal losses.

Reasons why iPhone does not load further apple

Before contacting the instructions, you need to understand what caused something that the iPhone does not turn on and the apple burns on the black screen. The most obvious reasons:

intervention B. file System smartphone;
error in the native phone firmware;
incompatibility of tweaks;
other manipulations.

Reinstall Jailbreak

If you have a Jailbreak and you suspect that he is to blame for a glitch, try to reinstall it. Of course, part of the data may be lost, but this is a small fee for the time to return the performance to your gadget. Re-flashing together with backup can take a long time, but the probability of recovery of lost data increases.

Re-install custom OS.

But if you have never climbed and installed the program on the type of jailbreak, then do not do it. So it's a custom firmware on your phone. You may not update your OS for a long timeWhat caused a failure and jumped up the system error.

If the iPhone does not load further apple, you should not panic and throw out the device. Even an inexperienced user will be able to reinstall the operating system. Download last version OS on the official website and follow the instructions for reinstalling. Be prepared for the fact that after installation, the data will be lost.

I fix the situation without flashing

Firmware is not the best option for the iPhone user, which values \u200b\u200bits data. Therefore, let's try another way. To begin with, disconnect your device from the computer or charger. Next, take and hold on it simultaneously the POWER and HOME buttons for 40 seconds. The phone will completely turn off. After a few seconds, turn on the device and check if the iPhone hangs on the apple again or not.

In most cases, the system failure occurs when the graphic shell is loaded, that is, at the final stage. To confirm this step, try calling your phone. If the operator informs that the smartphone is disabled, it means the dependency began earlier. Moved beeps - past concerns confirmed. In both cases, it is recommended to copy the personal data using the iTools or iFunBOX program to return them to the place later. Next will have to reinstall the firmware.

Apple technique is considered one of the most reliable, however, even this does not cancel problems with the gadget. Sometimes such damage, for example, an iPhone does not turn on, the apple is lit and goes out, they can be associated with the installation of dubious applications or with a number of other factors. However, about everything in order.

When the iPhone does not turn on, the apple lights up, but nothing more happens, it is not necessary to immediately contact service center. Factors, as well as solutions, this problem can be a whole set. Consider the most common of them.

Dubious applications

You should remember and check which applications have been set lately on the iPhone. Unfortunately, with using iTunes. this error It will not be possible to solve, for this you have to install an official utility called ITools. It is advised to delete the last downloaded applications alternately, and then try to restart the iPhone, until it works.

Jailbreak

As you know, this program opens unlimited free access To many paid or even expensive applications. Nevertheless, if the jailbrek is not correctly installed, it is also able to become a factor that the apple blinks, flashes, but the phone does not turn on. In this case, the only option is to flash the device, which means the full loss of data on it.

Mechanical problems

The hardware malfunctions include the following:

Error in the power chain. This is most often caused by a sharp voltage jump, so the owners of iPhones are not advised to leave the device on charging during a thunderstorm or during electricity interruption caused by any other factors.
Low air temperature indoors. Apple's official website even has an air temperature scale that is most favorable for the device. Manufacturers argue that if the device has long been in an environment where the air temperature is below the specified norm, it may cause malfunctions in the device.
Battery failure. The factor of this breakdown is able to use non-original charging or charging of poor quality. Owners of old devices are not recommended to allow a full discharge to extend the life of the battery.
If the owner of the device decided to replace the battery, it certainly advises to contact the service, because otherwise the chances of buying the original battery are actually zero.
Errors in work motherboard. This failure is easy to recognize in advance if the apple starts to burn with each inclusion of the device all longer. With this problem, it is better to refer to repair as soon as possible, because the failure is inevitable.

IOS system error

If the malfunction is caused by software iOS error, Solutions are not so much.

In some cases, it can also help a "deep reboot". This means that the "Home" key and the lock key and wait until the mobile is restarted at the same time. It is worth turning off the smartphone from a computer or another device, because they may interfere with the reboot process. If it worked, delete the few last programs that could lead to the fact that the iPhone does not turn on, the apple is lit.

Mobile must be connected to a computer using the original cable, then run on the iTunes device, then click on the Restore Device button next to the name of your device.

After that it is better to install new version Firmware device.

Checking the loops

Rare, however, no less important, the basis can be the fact that the train flew out of the connector. Then you need to do the following: you need to open the case, check whether all the items are on the scene (for this it is enough to find the image of the correct circuit and refer with it).

Video

Malfunction of the main microcircuit

Problems with motherboard Can be caused by a variety of factors, most often associated with careless use of the smartphone.

These include:

Fall in water. Most likely, due to moisture, the power supply chain closed, it burned, the iPhone 6 stopped turning on.
Fault Controller. As already mentioned above, the reason for this is capable of becoming neoriginal charging or voltage drop in the system.
Fall on a solid surface.
Failure due to wear.
Memory chip error.

Deep battery discharge

The battery can be translated into an extremal mode of use due to a special controller that will not allow to start the charging process. In this case, the first thing, it would not hurt to make sure the battery performance.

The way to solve this breakdown is to remove the battery, and then connect to the test. If the voltage is below 3.2V. - You need to connect a universal zoom called the "Frog" to the battery. Charging will leave 1-2 hours, after which the battery should be returned to the place and try to start the device again.

Even when the phone is charged, nothing helps, contact the service center.

Apple service center

If all of the above methods did not help, do not despair. The device must be attributed to repair, where specialists know exactly what to do if the iPhone does not turn on. It is possible that another detail of the smartphone ceased to work, and it will have to be replaced.

Conclusion

All of the above instructions should help to eliminate breakage. It must be remembered that the cause of breakage is often the inaccient use of mobile. For example, frequent drops of smartphone or drop in water. In some cases, the causes of faults are deeper than the usual user can assume, and therefore it is recommended not to disassemble the smartphone on their own, but use the services of the service center.

Do not forget that it is best to replace the items only in the official center, otherwise it is quite possible that the problem will not solve the repair of one damaged board.

Video

If your Apple device hangs on the download stage or is constantly turned off without your team, then the reasons may be two - technical and software. Next, we will focus on each version in more detail, but you must first find out if your problem is suitable for cases that will be disassembled in this article.

The essence of the problem: the device does not turn on, the apple is burning and goes out, black screen

So, the following instructions for eliminating errors will be valid only for the following cases:

Why idhone or ipad does not turn on

If something from the above list is happening with your device, then the reasons for this are several:

Software - the device behaves incorrectly due to an error in the operating system. Perhaps you accidentally damaged the system files, maybe the reason for the installed third-party applications. If the device after each turn on is automatically translated into the recovery mode - DFU MODE, then it means that during last recovery or the firmware update occurred some failure that led to the wrong installation iOS.. That is, the device will try to boot, stumble upon an error, and then automatically turn off, because it could not overcome the barrier appear.
Technical is a more serious reason, as it consists in the fact that the devices cannot normally boot due to breakdowns of its internals. The iron of your iPhone or iPad could be damaged if the device fell, water fell on it, dust came down in its inside, because of which the contacts were crushed.

How to Repair Situation

So, from the above material, you should have understood, how much the device was broken. If you have not figured out what the reason for the breakdown is, first try to get rid of the program error, and only then from the technical. Adhere to this order standing due to the fact that most often the reason lies in software, not in the internship, because apple companies Carefully about their protection is very good.

Elimination of program error

If the error occurs due to improper work operating system, The surest way out is to restore the firmware of the device from scratch. Make it possible with iTunes programsinstalled on your computer. But first charge the battery of the device, stick it into the rosette for an hour. Even if the device does not turn on, the battery will be charged if, of course, the problem of bad loading is not in it.

If you managed to recharge the device, then follow these steps:

Disconnect your device if it is not turned off at the moment.
Turn off the device
Run iTunes on your computer.
Open iTunes.
Now you need to translate your phone or tablet to recovery mode. To do this, you must first clamp the combination of the "Home" and "Lock" buttons for 10 seconds.
Click the "Home" and "Lock" buttons
Then you need to remove your finger from the "Lock" buttons, and the "Home" button hold for another 10 seconds.
We release the "Block" button
Connect the device to the computer using a USB cable.
We connect the computer to the device using a USB cable
A notification appears on the screen that iTunes has discovered a device that requires emergency recovery. Confirm the beginning of the process.
Confirm the recovery
Wait until the firmware boot. In no case, do not disconnect the USB cable, otherwise the process will be interrupted, and this will lead to another breakdown of the operating system.
Waiting until the firmware is downloaded
Wait for the process of installing the operating system, if everything goes fine, the device will start, and all the data that was lost can be restored from backupIf you, of course, took care of its presence in advance.
Waiting for the end of the installation of the firmware

Elimination of technical problem

If the method described above does not help you, or you are sure that it will definitely not help you, then one thing remains to disassemble the device and clean it internally, it may help to eliminate the error. ATTENTION, it is not recommended to do it yourself, as it is very easy to do even worse, breaking the wire or damaging the chip. The best way - attribute the device to the official technical apple servicewhere experts will independently read it and, if necessary, replace damaged parts.

If for some reason you do not want to carry your phone or tablet in the service, you will have to do all of yourself. The main thing, every movement should be slow and neat, otherwise additional problems cannot be avoided.

For cleaning and disassembly, you will need the following items:

After self-parsing, the warranty is removed from it. If you are ready for such sacrifices, we will proceed to the disassembly:

We take a screwdriver and unscrew two screws that are near the entrance for a USB adapter.
Use the sucker to pick up the screen and depart it from the main body. At this stage, it is important not to scratch the screen surface and do not break the latches that the screen holds. On the iPhone 5 there is a problem with the paint, which is too easy to father from the device.
Remove the screen
We unscrew three screws that hold the plate, which, in turn, holds the device screen.
Unscrew the screws
We postpone the part with the screen aside, it will no longer need it.
Put the screen
We take out the battery by pulling the special plate. The battery can be slightly glued to turn it off safely use a plastic blade.
After you completely discern all the plates and fees, one will remain to be promoting and removing the parts remaining on the body.
As a result, you will have a complete set of details that will need to be cleared and lubricating. Further, the most difficult thing remains - to collect everything in the reverse order.
Clean and lubricate details

Video Tutorial: "How to Disassemble the iPhone"

If you have successfully completed the process of dismissaling and collecting the device, then there are two options - the first, the phone or tablet earned, and this can be completed the entire process and proceed to using the device. The second option of events, the device has not worked, and one thing remains to carry it to the Apple service so that they have been involved in qualified specialists. Recall that the warranty on the device is no longer valid, you have to pay. Perhaps you will also have to pay for the replacement of damaged parts.

So, the device can stop running for two reasons - technical and software. Eliminate program error You can with the restoration of the firmware via iTunes. Get rid of technical difficult, as it is necessary to disassemble the device and clean all contacts and fees. If neither the first nor the second version helped run the device, you need to contact official service Apple.

Today iPhone superpopulation and in demand. Its excellent screen that gives an incredibly high-quality picture, conquered millions of users. Practical design, popular interface, convenient applications will not leave you indifferent to this crown of Apple's creation. But what to do, even if such a perfect device happens problems. For example, it simply does not turn on. In this case, it is very important to correctly diagnose the cause. Only after that act.

First you need to diagnose problems

We describe the most common causes of problems and tell you what to do.

When iPhone looks at you empty, black screen - do not rush to panic. This does not mean that he came to the end. Most likely, the reason is that the battery is completely discharged. The second reason may be dependent IOS. Rehabilitate the device is easy. The main thing is exactly what we will tell you.

If the reason is the fact that the battery is discharged, the long stay of the iPhone in the cold, then you first warm your device in the palms. Then fifteen minutes connect the device to charging. If the reason for the non-working iPhone in the discharged battery is shortly turning on. If this has not happened, it is possible that the IOS hung around everything. Then you need to click simultaneously on the Home and Pover buttons and hold them so ten or twenty seconds. Soon you will see that an apple is lit on the screen. Release the buttons and approximately after a minute of iOS starts.

If in this case the long-awaited apple does not burn, we will tell you what to do. It is necessary to enable / disable the silent mode to the iPhone two or three times in a row. Then connect charger For fifteen minutes. This operation, as a rule, always gives a positive result.

If these actions turned out to be unsuccessful, try changing the charger and cable. Perhaps they are the perpetrators that the iPhone does not turn on. If you do not use the original, but a cheap Chinese fake, the reason may be in this.

2. If the buttons do not work

The following option meets: the iPhone does not respond to pressing the buttons, and the screen is hung on the screen last application. The first thing you need to do in this situation is to restart the device in the compulsory mode. To do this, hold the "sleep mode" / "awakening" and "home" buttons at the same time, and in ten and fifteen seconds you will see that an apple is on the screen again.

It happens that the device does not turn on anyway. Then you should connect to charging and leave to charge the iPhone at fifty-sixty minutes. Soon you will see that the charging screen is on. If this happens, check the connector socket carefully, the charger and cable. Perhaps the reason in them. Try to fulfill the same procedure by resorting to the help of another source of battery charge.

3. If the iPhone does not turn on, and the apple is constantly burning

Another unpleasant situation that is often found among iPhone 4S users, iPhone 5S - on the screen it is lit, then apple goes out. In this case, do not feel your nervous system for strength. Most likely, failed when restore iPhone From the backup. What should be done in this situation? You will help the recovery mode and a computer on which iTunes should be started to start. After connecting the USB cable, but so far only to the computer. The following is your action - turn off the iPhone at all, getting rid of an apple that still burns, then goes out. To do this, hold the "Home" and "Pover" buttons. Next, clamp "Home" and plug into USB. This should be done until the iTunes logo appears on the screen and next to it is a plug image. You will see an inscription on the screen that the recovery mode works. All you need to do in the future is to click "Restore".

4. If all methods did not help

What to do if all have tried, but the apple did not appear on the screen of your iPhone? There is a special recovery mode - DFU. It is designed to restore the IOS firmware when all the other your attempts have crash. Immediately, let's say that this mode should be applied only in the most extreme case, because when it is activated, all data from iPhone will be lost.

So, you must first connect to charging for five to ten minutes. Connecting to the computer, check if the device was detected in iTunes. If this did not happen, go to DFU mode: at the same time hold the "Home" and "Pover" buttons for ten seconds, after release "POVER". Next, for fifteen-thirty seconds, hold the "Home" button until iTunes write "Recovery Mode". Do not expect further that the screen will thank you and show, as usual, an apple. Certificate of successful login in DFU is the absence of any image on the screen. If you wish, restore the firmware in iPhone, find the "Restore iPhone" button in the iTunes. To complete the operation in this mode, simply disconnect the cable from the device and press "HOME" and "POVER" for ten seconds. After these manipulations, the iPhone must reboot.

5. The service center will come to the rescue

If, despite all the efforts, the iPhone has failed to reanimate independently, you will have to seek help from specialists. But remember that only with proper handling the favorite gadget will serve you faithfully for many years.

Like the whole technique, Apple's devices are not eternal, but they can break over time. One of the most common breakdowns is when the iPhone turned off and does not turn on. The reasons for this can be very different, and depending on what the problem was caused, one or another method of solving it is used.

Today's article will be devoted to this kind of problems with "apple" gadgets. After reading it to the end, you will learn how to cope with any kind of breakdowns of your smartphone, and what to do if iPhone 4 does not turn on, iPhone 5S does not turn on or any other phone model.

However, we note that if your iPhone does not turn on and it has seriously suffered - for example, after falling from the fifth floor or it has been in water for a long time, then the methods described below the device is hardly useful. In such situations, it is better not to slow and immediately contact the service center. Well, for those users, whose iPhone does not turn on, and it happened suddenly and without visible reasonsOur recommendations should help.

We also note that there are mobile devices stopped turning on without any visible reasons, most likely, it was influenced from outside. Since so smartphones are usually not broken. Especially if we are talking about Apple's devices.

The most common situations of the breakdown of "apple" smartphones are given below, as well as the options for correction.

A very frequent problem, in which the iPhone 4S display does not turn on, but it remains black for a long time, and it does not turn on, whatever actions did the user. And this can happen not only with the outdated "four". Often the iPhone 5S does not turn on, too, what the black screen appears as follows.

As a rule, "to blame" in such situations a fully discharged battery, which needs to be charged some time, and then try to enable. Just the phone was discharged and does not turn on. But perhaps the case is in the hang of the operating system. Very rarely, in 2-3% of cases, the case in the flying firmware, but the solution to the problem in this case will be somewhat different than in the first two mentioned above.

So, if the iPhone, or rather, its screen is black, and the phone does not turn on even after charging, you can try to take the following steps:

1 If the gadget owner has long lasted the device in the cold, it is quite possible that the cause of a malfunction in this. Batteries of mobile devices poorly carry low temperatures, and in such conditions can very quickly be discharged or hang. What to do in this case? Try to warm the device in the palms. If it did not help, try the second step. 2 You just need to connect the device to charging. Perhaps the device was discharged 100%, and the reason for the gadget failure is in this. If after 10-15 minutes of charge the device does not respond to the inclusion, it means that the problem is not in this. Then we try the third way. 3 It is necessary to make the simultaneous press of the Home and Power buttons (on the iPhone of the seventh version - Power and Volume). Wait 20 minutes until the display of the apple appears on the display, after which the download buttons. The operating system should boot. 4 You can try to turn on and turn off the switch the silent mode several times, sometimes it helps, although there is no reasonable explanation. Such a procedure should be done before the second step is fulfilled. It sometimes gives a positive effect if the buttons are pressed.

If the above-mentioned action did not give any result, it means that the problem is very serious. For example, there may be a breakdown of internal elements, failure of the charger or anything else. You can try to take another charging (for example, a relative or colleague), and connect the gadget to it. If the situation is not corrected, and the phone will not charge, and the display will be stored black, you need to carry the device to the repair workshop.

You should not ignore the charging fault option. As the experience of users shows, it is this component that most often fails, and maybe even burn. After a few months of operation, especially with an inaccurate handling, the cord in any place may be damaged, and the current will not pass on it.

Attention! Use exclusively original charges that are coming with an iPhone. Chinese fakes are rapid heating and are often melted during charging. The burning cord of China's production - the phenomenon is not so rare.

Dedified iPhone refuses to turn on

The reasons for this problem may be several:

1 contaminated Lightning - port. It is no secret that the majority of the population wears smartphones in the back pocket pants, and also does not place a fragile device in protective covers. Of course, with such an inaccient operation, a lot of small dust falls into the device case. How to fix this problem? The solution is simple - clean the gadget from dust, for example, with the help of toothpicks. In the process of cleaning, it is recommended to get to each corner in the Lightning connector. But you need to work very carefully, so as not to damage the fragile detail. 2 USB - port is faulty. I charge the gadget, the first thing you need to check if the cable is working. Perhaps faulty connectors. It is not known what it is connected with, but through some connectors the smartphone does not receive charge. 3 If it's about this, try using another cable. You can also try to connect to another 220 volts socket. 4 Problems with a charge device or cable. The fact is that many users, saving money acquire Chinese charging. They often break and quickly cease to perform their functions. Therefore, once again we will recall that it is better to use the original components. Chinese fake Maybe irreparable harm to your device, causing breakdown. But if you still decided to buy a fake charging, and if it does not work when the first connection does not work, that is, the phone does not charge, stop using it immediately.

What if the iPhone hung?

Usually, the phone from Apple hangs in the application. Or does not hang, but ceases to work normally. In this situation, it is necessary to forcibly close and restart the device. To do this, you need to click on the HOME button and swipe top remove unnecessary app.

When the "apple" gadget does not respond to pressing the buttons

Users noted that the situation when the device stops responding to pressing the buttons, quite frequent. At the same time, the display shows the last screen of that application, which was used until the device depended. It will take a rigid system reboot. How to do it, it was said earlier (by pressing the POWER and HOME buttons).

If the iPhone does not turn on the apple, what to do?

If the iPhone turned off and does not turn on what to do - which question is often asked for inhabable users. Sometimes it happens so that iPhone device 4 does not turn on, but at the same time the display lights up, the image of the Apple logo is faded. This means that the device is hung on the apple. By the way, it often happens that when such signs of iPhone 5 appears, the iPhone 5c does not turn on, and other models of "apple" devices are refused to work.

If the iPhone goes out, and then an apple lights up, then the reason for this one of the 3rd:

Unsuccessful IOS operating system update process in iPhone 5S, iPhone 6S, iPhone 7, iPhone 6 Plus, iPhone 3GS and other phones.
Corywood jailbreak.
Failure when restoring a backup system (one of the most frequent reasons why the iPhone does not turn on).

With this situation, the user might think that the device is hopelessly broken. But this is not always the case. You can try to fix everything.

In most cases, if not included mobile deviceThe problem is solved by the recovery procedure of the system, for which you need to do the following steps:

On a PC or laptop, the opening of the Aytyuns utility. Connect K. uSB computer Cable, but the smartphone is not yet connected.
Turn off the phone holding the HOME and POWER buttons.
Press the Home button, connect the cable to the phone.
Do not let go until the iTyuns logo and plug appear on the screen.
The computer will display a message that the device is in the restoration state.
And now you just need to click on the recovery button, then the computer will do everything yourself, namely, it will be downloaded from Apple servers the newest iOS versionAnd then becomes it on the iPhone.

Note that for the procedure described above, you need to have a high-speed connection via Wi-Fi.

Application DFU mode for inclusion iPhone

What to do if iPhone 5 and other, newer versions of the device - iPhone 6 does not turn on, iPhone 7, iPhone 6s suddenly disconnected, but does not turn on. In this case, the display can suddenly light up, and then ground, i.e. The device responds several times to touch the user to the power button, and after will turn off "forever".

If, after applying all methods described above, your device does not turn on, it remains to take advantage of the last method - dFU modes. This is a special mode of operation of the phone at which the firmware is updated.

This mode is used in the following cases:

The device refuses to charge when iPhone 6S does not respond to current flow through the charger. With such situations, the device is capable only completely discharged and disconnected. For user feedback, i.e. Attempts to include. It does not react in any way.
The iPhone does not turn on with any user actions (iPhone 6S, iPhone 3GS and others).
It is impossible to restore the system by other methods.

To the iPhone entered into this mode, you need to do the following steps:

Connect the gadget to a PC or laptop through the cable, plus run the Aytyuns utility.
Within 10 seconds at the same time click on hOME buttons and Power.
Continue to hold down the 1st button while the Recovery Mode message appears on the screen.

If everything has passed successfully, no special messages that the device entered this mode should not appear. Next, you need to restore the firmware, for which you want to click on the appropriate button to start uploading. The system itself will do everything in 10 - 15 seconds, and after that the smartphone will restart, and starts to turn on and operate in normal mode. In this case, the screen will not be turned on, and for a while it will turn off, i.e. The display will have time to go out during this time.

If none of the ways enable iPhone You did not help, and after applying all possible methods Inefone 6S or any other model of the phone, contact a service center. Experts will diagnose and identify the true cause of this malfunction. In this case, it is necessary to blame, obviously, not the discharge of the device and not shutting down without visible causes, but more serious faults in the "stuffing".