When the volume changes on the iPhone shows the headphones. Without headphones no sound on the iPhone - what to do

According to the results of the SquareTrade study, the iPhone are the most reliable smartphones on the market. However, even Apple devices are subject to failures. In some cases, after listening to music on the iOS device through headphones, sound in the speakers completely disappears. Sometimes on the device shows the volume icon that does not respond to changing the sound level. The problem is quite rare, but this still happens. For those who first encountered such a, we offer instructions for restoring the work of the gadget.

Why does the iPhone believed that headphones are connected to it, although it is not?

The essence is as follows: you listen to music on your iPhone, iPod Touch. Or iPad, take out headphones and ... system notifications, sounds, ringtones calls no longer reproduce through the built-in speaker. There may be several reasons, but the most common are as follows:

Failure at the time of extraction of the plug from the device.
You turned off the headphones at the time when the device performed internal operations.
You used headphones or headset of inappropriate quality.
Problem with 3.5 mm connector.

Software or problem with iron

In fact, not only hardware problems can be given to such a casus, but also failure operating system. As practice shows, the overwhelming majority of victims have been manifested precisely because of a banal error. What can be done in this case:

Insert and remove the plug from the nest Headnikov. There is a chance that IOS did not have time to determine that the headphones were extracted. If the user has pulled the plug sharply, the system can continue to believe that they are still connected. Sometimes it happens just several times insert and pull out the headphones so that the device began to start working normally.

Connect other headphones. It can really help. If the problem is in the connected accessory. Yes, yes, especially if it costs less than 300 rubles.

The problem of poor-quality accessories is not Nova, but to make sure that it is not only in your headphones, it would be nice to try and alternative.

Reboot the device. A simple reboot device can solve your problem. To coupled with the Chinese headset and the assembly in the OS, it is quite possible to ensure that the smartphone will not understand what happened.

Check headphone jack. If none of the ways above you helps, it's time to apply the method of deduction. And what if at a 3.5-mm iPhone connector hit something? Various contaminants can lead to a closure of headphones and smartphone contacts. Take a flashlight and look inside. If there really fell something, you can use a toothpick or cotton wand for cleaning the connector.

Remember that everyone needs a measure. It is also not a better to put pressure on the walls with all its strength.

Restore or update iOS. If there are no problems with a connector, nor with the system, you can use a more radical method.

Try updating iOS out. There is a chance that after the update everything will fall into place. Especially if you had any tweaks of the system.

Jailbreak?

Sophisticated software installed from an unofficial store apple companies It can lead to similar consequences, especially if the user installs the user is new to the "Jail". In this case, you can try to delete all the tweaks used. And if it does not help, try previous steps.

Service center

Unfortunately, if the methods described above have not led to the desired result, then the last thing you can advise - contact authorized service center. You should not try to disassemble the device yourself, even if you are confident in your abilities. It often happens that violations are associated with damage pCB After entering moisture. Some users inform about the problem with the sound after the iPhone visited water or suffered from liquids spilled on it.

We hope that the above-mentioned tips helped to eliminate this annoying problem. Remember that most problems with iPhone and iPad are quite simple.

On your phone a headphone icon appeared? You are not alone, with such a "glitch" people face quite often. This is not only an unpleasant fact that shows a temporary malfunction of the system, but also the real reason for further "hanging" of the device. That is why mobile devices are trying to solve the problem faster.

Common causes of malfunction

One of the most famous and common causes is a blow. A failure may happen from him that affects the further work of the mobile apparatus.
Moisture. It can be a copied condensate from the temperature drop when the device gets from the frost into a warm room, as well as the liquid spilled onto the mobile.
Mechanical contamination of the jack of the connector, which appears in the process of its normal operation.
Inactive removal of the headset from the connector. It can "confuse" the phone and make it "think" that the headphones are still inside and are connected to it.

Important!If the problem lies in the fact that the device is spilled with liquid, then you should not try the following options below, and simply you need to attribute your device to the service center.

If you want to try to solve the problem yourself, then you should immediately turn off the smartphone, disassemble it by driving the battery, and let it seek in a warm place for about a day. If this method has not worked, it means you should accurately pass the device to repair.

Diagnostics

Often the cause of the fault is quite obvious to the user, but there are several actions that can be performed to more accurately diagnose:

If the icon appeared due to an inaccurate extraction, the user may not immediately notice the problem. Nevertheless, he will be able to exclude other error options due to the fact that this is the only option in which the headphones were physically in the device at the time of its occurrence.
Moisture. If a small condensate has accumulated on the device itself, it is quite difficult to determine it. A sign of such a problem can serve as a conversion of frosty temperatures in a very warm room. Most devices at the same time normally carry such differences, but there are exceptions, whose fault is manifested through the headphone icon.
Pollution. It may not be obvious to the user. Moreover, when it is presented, the headset can be effectively used for its intended purpose, but if there is a similar problem, it is completely solved by simple manipulations.
Inactive extraction. "Symptoms" of this problem are similar to those that are in contamination. In both cases, the definition of the problem occurs during its solution.

How to remove a burning icon from a smartphone screen

There are several simple actions to solve the problem.

Important! If all actions were tested and there is no result - you need to contact the service center for repairing the device.

Reboot. This solves the problem in 80% of cases.
Visual inspection of the nest of the entrance. Even if the pollution is not detected, it is worth "blowing" this nest and try to gently "knock out" from it particles of dust. After that, it is also recommended a reboot.
Remove the battery and let dry. This option should be tried the last. If the device was not flooded, and there is a suspicion of the formation of condensate, it is enough to remove the battery and give it to succeed 3-4 hours.

As you can see, the reasons for failures can be a lot. The main thing is to find the reason why this happens and perform the correct connection.

Is your device stuck in headphone mode and reproduces it, only after connecting the headset? In this article, we have collected all the ways to turn off the headphone mode on iPhone 5, 6, 7, 8, X, SE, these methods are also suitable for Apad and Eupoda.

For the start, go to "Settings", "Sounds", and then "Ringtone". Try to include different call melodies and look if your speakers work.

Make sure your battery is charged more than 30%. Perhaps the problem is linked to the insufficient power level.

Finally, close all your open applications, double-clicking "home" and expand them to close each separately. Then restart the iPhone.

Try connecting a Bluetooth headphone

Try connecting the device to the dynamics of Bluetooth or to Bluetooth headphonesAnd then disconnect it. Look, whether the headphone mode on the iPhone is turned off when headphones are disconnected!

When you connect the iPhone to the Bluetooth device, you can exit the "headphone regime". To do this, first turn on the Bluetooth ("Management Center" or using settings).

After connecting K. bluetooth dynamics Play song. During the playback of the song, disconnect the Bluetooth setting on the phone. This will correct the device error.

Check out some settings

The parameter called "Call Audio Routing" determines where the sound is heard during telephone and audiosiles.

So let's check the settings. Go to "Settings"\u003e "Main"\u003e "accessibility" and scroll down the page down to the "Interaction" section. Continue to scroll until you find a call. It should be on "automatically". If it is not, tap it and select "Automatically" from the list.

If the "automatically" mode is already selected, try installing it on Speaker. Now test it by making a call or audiosiles on FaceTime.If the speaker works, then go back to the same configuration and change it to "automatically".

Switching this setup mode can help disable headphone mode on iPhone and Apad.

Try turning on the flight mode

Switch to "Flight Mode". Go to "Settings"\u003e "Flight Mode" and turn it on. Wait 15 minutes or more, and then turn it off and check if your speakers work.

Turn off the headphones

If iPhone in headphone mode without connected headphones, then in the port of the headset can be trash, dirt. To remove them, disconnect, and then re-connect the headphones several times (at least 7-8 times). After that, restart your iPhone (pressing and holding the "Home" and "Nutrition" buttons.) On iPhone 7 and iPhone 8, x Reload you can

Some users reported that they corrected this problem using a hairdryer. You can also use toothpick or Q-Tip and clean the port to remove dirt residues. To use Q-Tip, make sure that you take off most of the cotton so that it fits tightly to the port, but at the same time not stuck in it. Using the Q-Tip inside the socket, do multiple speed to clean the port.

If you decide to use a hairdryer, make sure that it is in the "cold blowing" mode or at the minimum temperature.

Be sure to turn off the phone before taking any steps listed above.

Push the headphone jack

Before blowing the air into the nest for headphones iPhone., take a flashlight and see if there is anything inside. If you noticed something - pull it out. Now carefully and carefully blow the air right into the headphone socket. This should remove any small particles.

Try the sprayer. It is commonly used for cleaning computer keyboards And other electronics. Fortunately, a small plastic straw mount is perfect to the nest for headphones.

Check if your sound is returned to the operating mode.

Several of our readers even used a small vacuum cleaner to clean the headphone jack (and it worked). Just be very careful.

Use dry cleaning napkins

As already mentioned, this problem with the iPhone usually occurs when the headphone connector is damaged or the large garbage accumulation. Therefore, it is necessary to correctly clean the headphone socket. Take cotton fabric and clean the hole several times. Make sure that when cleaning the connector you will not apply water on it.

Some users believe that toothbrush It helps to clean the nest of headphones from dirt and dust. It is necessary to clean with a light touch, you can add a little alcohol (add water and vodka it is impossible). Make sure your phone is turned off before inserting any tool into the headphone socket.

Another way is to make your own cleaning brush using paper clips and transparent ribbon. Bend the clips directly and wrap it with the tip of the sticky side of the tape out. Gently insert a sticky tip into the headphone socket, slightly pressing it on the side to pick up dust and dirt. Do not forget to turn off the phone before you start doing it.

What if the iPhone thinks he is in headphones?

What to do if an iPhone thinks what is he in headphones?

iPhone heard sound only in headphones (solution)

IPhone thinks he's headphones what to do

You can also fold a small piece of tape inside out the sticky part outward. Gently insert the ribbon into the port of the headphone connector and squeeze it on the side. Leave long tips so that they can be easily removed.

In addition, on the inside of the connector there is a small hole, in which dirt and dust often gets stuck. Try to clean it with a pin with a small amount of alcohol. It should help remove headphone mode on iPhone and Apad.

Check for water damage

Headphone socket is one of the most vulnerable iphone areas, and it may be damaged unconsciously. If you like to run or train while listening to your favorite tracks, there is a possibility that the sweat can get into the headphone socket.

Even if at that time he was in your pocket. To solve this problem, try to check your device, for water damage. You can always use silica gel dryers on your phone or other adsorbents.

Did the sound on the iPhone 6? Problem and solution!

Lost sound on the iPhone, what to do?

What if the iPhone disappeared the sound?

Did the sound on the iPhone? Problem and solution!

Sound on the iPhone 7 solution!

Try to include some music or other app

First connect headphones, open iTunes and play any song. Wait until screen iPhone automatically blocked. Then unlock it, close iTunes, double-clicking on it and turning up, disconnect the headphones. Open YouTube, Pandora, Spotify or another application and enable music.

Put the maximum volume and check whether the speakers work. If so, go to other applications and make sure that the sound also works.

This is one of those councils of experts who mainly work to correct the headphone regime on iPhone 6. To begin with play a song on the phone and allow your phone to be automatically blocked during playback.

Now connect the headphones to the device and open it. Manually stop playing the song and disconnect the headphones. This will allow your phone to get out of the "headphone regime".

Update to stable version iOS

There may also be a problem with your version of iOS.. Therefore, it is strongly recommended to update it. It will also solve any other problem with your device.
Open "Settings"\u003e "Main"\u003e "Update software"And" download and install "new iOS update On your device.

Reset all settings on your iPhone

Some users have enough reboot smartphone. If all of the above solutions have not worked, this method can help. Deletes all existing settings on your phone.

Simply select "Settings"\u003e Reset\u003e "Reset All Settings" and confirm your password. Your phone will reset the settings and restarts in as usual mode. Using the iPhone application, can you easily restore the firmware?

These methods helped you turn off headphone mode on iPhone? If not, try tips that are collected from different forums.

Users of users who encountered a problem

The user reports that the problem when the iPhone is stuck in headphones mode disappeared. After he finished backup ICloud, and he discovered that the problem of jams in headphones on the iPhone and Aipad disappeared. If you create backup Through iTunes, it can also work for this backup method.

Tips readers:

Call someone with headphones enabled and press the speaker. As soon as you hang up, turn on the iPhone on Silent, then turn off.
For iPhone 7 and other models without headphone slots, try to connect the charger back to your iPhone, and then disconnect it. If necessary, repeat.
Use air by spraying it into the headphone socket or port, at the same time pressing both volume controls.
A simple solution - Enable the audio off button and press the volume buttons. Do not forget to turn off the sound off button.
Open apple application Voice Memos and write down a new voice. It can also solve the problem.
Try the FaceTime Call. Be patient because you will not hear the sound within 10-30 seconds, but stay on the call. The speaker will then turn on, and the phone will be released from the "headphone regime".

Phone 5 Sound works only in headphones

Why does the iPhone believed that headphones are connected to it, although it is not?

The essence in the following: You are listening to music on your iPhone, iPod Touch or iPad, take out headphones and ... System notifications, sounds, ringtones calls no longer reproduce through the built-in speaker. There may be several reasons, but the most common are as follows:

Failure at the time of extraction of the plug from the device.
You turned off the headphones at the time when the device performed internal operations.
You used headphones or headset of inappropriate quality.
Problem with 3.5 mm connector.

Software or problem with iron

In fact, not only problems with hardware, but also a failure of the operating system can cause a similar incident. As practice shows, the overwhelming majority of victims have been manifested precisely because of a banal error. What can be done in this case:

Connect other headphones. It can really help. If the problem is in the connected accessory. Yes, yes, especially if it costs less than 300 rubles.

The problem of poor-quality accessories is not Nova, but to make sure that it is not only in your headphones, it would be nice to try and alternative.

Remember that everyone needs a measure. It is also not a better to put pressure on the walls with all its strength.

Restore or update iOS. If there are no problems with a connector, nor with the system, you can use a more radical method.

Try updating iOS out. There is a chance that after the update everything will fall into place. Especially if you had any tweaks of the system.

Jailbreak?

A third-party software installed from Apple's unofficial store can lead to similar consequences, especially if the user establishes the user is new to the Jail. In this case, you can try to delete all the tweaks used. And if it does not help, try previous steps.

Service center

Unfortunately, if the methods described above have not led to the desired result, then the last thing you can advise - contact an authorized service center. You should not try to disassemble the device yourself, even if you are confident in your abilities. It often happens that violations are associated with damage to the printed circuit board after moisture. Some users inform about the problem with the sound after the iPhone visited water or suffered from liquids spilled on it.

We hope that the above-mentioned tips helped to eliminate this annoying problem. Remember that most problems with iPhone and iPad are quite simple.

Iphon is a very common type of smartphones on the modern market of goods and services. Many buyers want to acquire exactly such a gadget. It has its own quality and capabilities. But not everyone is understandable how to work with the iPhone. Often, standard errors and malfunctions cannot be resolved with familiar methods. After all, the learned gadget is not working on the well-known "Android", but on MacOS. Therefore, it is important to know exactly how to fix one or another error. This article will tell you how to disable the headphones mode on the iphone. What is it at all the opportunity? Having understood this, it will be possible to correct the common failure, with which the owners of the iPhone are faced.

Description of the regime

"Headphones" mode is an opportunity to adjust the sound on a mobile device when the headset is connected. He enters B. standard settings "Iphona".

This parameter helps to switch the ring volume when listening to music. For example, when connected headphones, it is 50%. If you turn off the headset, then the smartphone will automatically switch to the "call" mode, which implies that the sound will work 100%. Nic additional settings not necessary. Very comfortably!

But sometimes you have to think about how to disable headphones on the iphone. It turns on automatically when the headset is connected to the device. Ideally, the disconnection of it occurs in the same way: as soon as the headphones are retrieved, the iPhone goes into the "call" mode. How to be if this did not happen?

Possible causes of the problem

First of all, it is necessary to understand what is the reason for this behavior. After all, the included headphones mode leads to the fact that the subscriber does not hear his smartphone. It's no sound when there is no sound when the headset is disconnected.

In fact, the reasons may be a huge amount. Most often subscribers face:

contamination of the device;
damage to connecting connectors;
system failure;
getting water to the phone;
high humidity indoors.

As a rule, it is possible to accurately determine the cause of the breakdown only by interacting for possible options. Often, turn off the "Headphones" mode without assistance. How exactly?

Reboot

There are many ways to combat learned by the problem. How to disable headphone mode on "iPhone"? Users give each other a variety of tips and recommendations.

You can try to connect the iPhone to the charger, and then restart the gadget. Before this headset must be removed from the smartphone. If such a reception does not help, it is recommended to repeat the operation, but when it is included in the network charger. And instead of the usual reboot Hard Reset.. To do this, in the off state, the volume and inclusion buttons "iPhone" are pressed, after the appearance of the Apple icon is released, and the HAD RESET is selected from the menu.

Cleaning

How to turn off headphone mode on "iPhone 6" or any other brainchild from "apple"? It all depends on the situation. The following advice will help those who actively use the smartphone, but the headset connects to it rarely.

It is possible that the problem lies in a clogged headphone connection connector. It is recommended to take it carefully. To do this, it is best to use a toothpick or a piece of paper sheet.

As soon as the connector is cleaned, you can try to insert the headset into the device, and then turn it off. If everything happens, the smartphone switches to the "Call" mode. Now one more option is clear how to turn off the headphone mode on the iphone.

Drying

But that's not all! As already mentioned, there may be many reasons for the studied phenomenon. All of them are eliminated different methods. Previously lists the most common mistakes and failures.

How to disconnect the headphone mode on "iPhone 6" if the previously proposed tips did not help? Just dry the gadget. It is possible that the error occurred due to increased humidity in the room. It should not be surprised if the "headphones" mode is not automatically reset after the iPhone fall in snow or water.

It is best to use a hairdryer or vacuum cleaner to pull out all moisture. It is necessary to maximize the device, then dry it from all sides (connectors including), after that collect. You can resume an attempt to switch the gadget modes. For this, the headset turns on and off.

Reset

Another interesting reception is a reset. user installed settings. It will help those who thought how to turn off the headphone mode on "Iphona". For this you need:

Enable mobile device And wait until it boots.
Go to "Settings" - "Basic" - "Reset".
Click on the "Reset All Settings" button - "Erase the iPhone".
Enter the AppleID code to confirm the operation.

Extreme measures

Now it is clear how you can turn off the headphone mode on "Iphona". All proposed methods help in most cases. There is another interesting and risky technique.

Some users advise placing the device for 5-10 minutes in the refrigerator. After that, you can connect and disable the headset. All changes must occur automatically.

From now on, it is clear how to turn off the headphone mode on "iPhone". If all of the listed recommendations did not help, it is best to attribute the device to the service center. It is likely that there will be able to quickly determine the cause of the failure and return the work condition to the smartphone.