Restoring backup iPhone. Backup iCloud copies in iPhone: how to create, restore, enjoy

Subscribe:

If you need to update the IOS operating system, restore lost data from your iPhone or configure some new device with Apple, then one way to do this is possible using the ICLOUD Internet service.

Iphone recovery order from iCloud

1. To restore iPhone from backup First of all, you must go to the category "Settings". Next, select the "Basic" section, then "software update". With the latest version operating system, Select it, and, Following the unacter instructions, update iOS.

2. Next, you need to check whether there is a backup to restore the smartphone. In the "Settings" category, go to the "icloud" section, then subsequently "Storage and Copies". At the bottom of the screen will be the "last backup". Near it is the date of creation.

3. The next step is to "Delete Content and Settings". This is available in the "Settings" category, the "Basic" section, in the "Reset" subsection.

5. Last step, select the appropriate backup from the Select Copy section.

Do not forget Before updating the firmware, create backup copies.

Use the convenient iCloud service if you need to save melons from iPhone: photos and video recordings, shopping history, text messages and MMS, the order of program and applications on the main screen and, of course, iOS settings (operating system).

Also in the backup can be kept contacts, letters email, calendars and notes.

In addition to the iCloud service, the iPhone restore from the backup can be performed in iTunes.

Comments

Mobile users are sometimes wondering how to restore data from ICloud. There is a simple I. fast way Extracting information S. cloud service without recovery iPhone devices, iPad or iPod. First you need to download and install the iMobie PhoneRescue on your computer, after which follow the manual for extracting files from iCloud.

Every time with the advent of a new version of iOS. Users begin to massively switch to the new version of the operating system. It is recommended to create a backup of your device via icloud or iTunes to make it possible to easily restore lost data in case of unsuccessful update. When installed new version The operating system is always the likelihood that unexpected complications arise.

IPhone and iPad users know that after switching on icloud and wi-Fi network All iOS content is saved on the cloud server. However, after creating a backup in ICloud, you will not be able to view its files before starting the recovery process. For this reason, the user will be deprived of the ability to extract only the specific files that he needed.

Usually, the IOS database owners are trying to restore the iPhone data via iCloud for one of the following reasons:

it is necessary to restore the contents of the operating system, which was deleted by mistake;
you need to move the data from the old device to new iPhone or iPad;
the user wants to get some files from the backup, which was previously made.

How to restore information from iCloud using PhoneRescue?

To selectively extract files from Aiklaud, you will need a functional application for recovery. iOS datathat will help you get those data that you need. With this task, the tool called Imobie PhoneRescue is perfectly coping. This data recovery software works with iOS and Android.

The application makes it easy to restore necessary information. Most often it is used as an extractor to extract files from the ICloud backup archive. The program supports more than 20 types of iOS content, including photos, videos, voice reminders, text messages, data messenger Whatsapp, contacts, call history, notes, etc. Trial version PHONERESCUE applications can be downloaded for free on the official developer page.

You must install and run the program on your computer. To restore data from ICloud, you must perform the following steps:

Start PhoneRescue, select Recover from icloud, press the right arrow and go to the next page.
Login using your Apple ID and select a backup. A window will appear in which it will be necessary to define the types of files. Select all types of data that needs to be restored, and click OK. Wait a few minutes until the files are loaded, and use the right arrow to view the backup.
Select the necessary items and click the to Computer button to restore them.

PhoneRescue tool works well with windows computers and Mac, compatible with backup copies of IOS 7, 8, 9, 10 operating systems. You can remove only those from iCloud iPhone data or iPad, which were previously preserved. The program allows you to restore files even from damaged backups. Using PhoneRescue is allowed to export data on windows device, Mac, iPhone, iPad. To immediately transfer data to mobile deviceYou should use the to IDEVICE button.

Removing information by restoring the device

If you extract data from the iCloud cloud storage on the iPhone to restore the device, then all current files and settings on your phone will be deleted. To preserve the settings, you need to use the above application of the iMobie PhoneRescue. The user who purchased a new iPhone must start the device and follow the instructions on the screen to configure the system. Then you should select the recovery from the iClaud backup when the Apps & Data option appears, click Next, enter your Apple ID and password, agree to the terms of using the cloud service, select a compatible backup and wait for the completion of the setup process.

If the old is configured iOS devicewhich you have already used, you need to choose Settings, General, Reset, Erase All Content and settings and Erase iPhone (iPad, iPod). Next, you will need to enter your password, confirm it and wait until the device deletes the data and reboots. After rebooting, the user will only be able to configure the new IDEVICE.

The owners of the iPhone have to face a backup recovery situation. You can save music, movies, books, TV shows, contacts, programs, photos, and so on. In a word, almost all the information that your iPhone stores. A backup copy for most of the data is created in iCloud and iTunes. On how to restore a backup copy of the iPhone, and it will be discussed in this article. But some may not even know how to create it. Therefore, we will also tell about the creation, and on the restoration of the backup copy of the inicloud and iTunes.

ICLOUD backup

In order to create backups, you need to go to "Settings / ICloud / Copy to ICloud (Turn on)". And all after the function reserve copy Included, it will happen every day, but only under the condition:

There is an Internet connection via Wi-Fi
Blocked screen
Is on charging, i.e. there is a connection to the power source

You can create a backup manually. To do this, connect the device to the Internet via Wi-Fi. Next, you need to go to "Settings / ICloud / Storage and Copies", then select "Create a copy". It is necessary to take into account that ICloud works only with devices, starting CIOS 5.

Restore from backup in iCloud

In order to restore an iPhone from a backup in ICloud, you need to do the following:

After starting work with the new device with iOS 5, an assistant appears.
Should choose "Restore from copies icloud.", And then enter the name and password of your account icloud.
In the list of the 3rd backups that appears, you must select the one that will be recovered.
Former settings will be restored immediately after the system is restarted. Get the download of your files. To find out whether the recovery is completed, you should go to "Settings\u003e ICloud\u003e Storage and Copies".

Backup in iTunes

You can create backup devices in iTunes in 2 cases. First, during synchronization with iTunes. It should be remembered that the function is disabled if the backup is in ICLOUD. Secondly, when you press either with the right mouse button, or the left with the CONTROL key by the very name of the IOS device in iTunEs, and then the option to "create a backup" item.

If you want to create a backup manually for your iRNE or other IOS device, you can do this as follows:

Connect the device to the computer. Should remember what should stand latest version iTunes programs.
Go to the "Devices" tab and select the desired device.
Next, you should press either by the right mouse button, or the left with the CONTROL key along the very name of the device and select the "Create backup" item.

Restore from backup in iTunes

Now we have come to the question, how to restore from the backup of Ituns. To restore information, the device is connected to personal computer. It should be noted that the connection is required precisely to that PC, which is usually synchronized with this iRHO or another IOS device, after that the following steps are performed:

Connect the iRHO to the PC and run iTunes
In the sidebar, click right-click on the iRho and click "Restore from the backup".
In the list that opens, select the desired backup.
Click "Restore".

You can say that users of devices with a jailbreak can be said that during the recovery process of calendars, SMS, notes, contacts and settings on the iRHNE, the firmware of the device does not affect and the factory settings of the iRHO are not returned. Therefore, the recovery feature from the backup of Ituns, they can use calmly.

So we finished the conversation about the restoration from the backup of the iRHNE. Remember that regular backup creation allows you to reduce the likelihood of data loss and helps restore information in case of loss of iRHO. This will allow you not to know problems with data loss. We wish you good luck!

The recovery of the iPhone from the backup is done very simply, even if you never used iOS-devices and hold the smartphone from the pin in your hands for the first time. For this, there are several ways to restore data from the backup, which will be discussed below.

Resorting to such a procedure, the owner of the iPhone should understand that it is a certain extent risk, because You can lose some data. This sometimes happens due to software failures or other force majeure. In one second, all data important for the user can be labeled. But sometimes they have for the owner of the "apple" phone much greater value than the device itself.

So that such problems did not occur before restoring the system, you need to make a backup. And in general, copying is recommended to do regularly. If the user has no desire to copy manually, you can select the automatic backup mode.

Based on the position that the copy of the data from the iPhone owner is available, we will tell you how to restore the iPhone from the backup.

Selecting a specific way, how to restore a backup copy of the iPhone depends on how the method was made.

If aiklaud was used, the operation will be possible only with the use of setting assistant during the activation of the gadget. And for this you will surely need to connect the smartphone to the network via Fi.

If copying was made on a PC or laptop with the participation of the Aytyuns utility, it is possible to carry out the procedure once, if only the user has access to the computer with the program installed on it.

Reference. Copying data to Aytyuns can be both on the PC disk and in the Aiklaud. But you can restore information from the repository only if an initial iPhone setting was performed.

So, the recovery operation is allowed:

On a PC or laptop through the Aytyuns utility (regardless of the availability of the Internet, when it is necessary to the user).
On the device itself, but provided that it is activated.

How to recover from backup iPhone in Tunes

As noted above, the recovery method will depend on how the backup was made. If the Ayklaud is turned on in the ATYUNS utility at the copy of the copy of the copy of the copies, and there is no PC on the hard disk at least one copy of the data, then with the help of the ITYUNS, it will not be possible to carry out the operation. You will have to look for any additional way to solve this problem.

As an example, consider the following situation. For example, a user at 10 o'clock in the morning created a backup through Aytyuns to Aiklaud, and at 11:30 pm - did the same thing, but on the computer disk. After that, it is found that in the "Device" tab of the ITYUNS utilities no files with a copy. Moreover, the copy was created, and for this was used the means of Aytyuns.

From the above, you can conclude that when copying to aiklaud in a mediacombine, a file with information on the machine is stored in the repository, and on the PC disc or laptop - no. Data recovery from a copy of aiclaud is possible only when using the setup assistant during the activation process.

And to restore iPhone from a backup created using the Aytyuns utility, and stored in the computer's memory, you need to perform actions such as:

Connecting a device to a PC or laptop using a USB cord, and then open the utility if it does not start on the machine.
Go to main page Smartphone, to the backup section.
Click on the recovery button from the copy.
When you turn on the iPhone search function in Aiklaud, you need to turn it off while the recovery procedure is being.
Selecting a file with a copy from which data will be recovered, confirming the operation by pressing the corresponding button.
Waiting for the completion of the procedure. After it is completed, the gadget on the machine will start the setup assistant, and the user will only have to configure the geolocation and aiclaud.

Reference. Not many know that copies made on different devices From EPL, compatible with each other. So, input to the iPhone is allowed to restore from the backup of another smartphone from the EPL, and even from the iPad or iPod Touch.

After completing the configuration on the device, all user data will be restored, which constituted backups. In Aytyuns, a full-fledged copy is formed, which, unlike the file created in Aiklaud, additional settings does not need.

How to restore iPhone from backup in Iklaud

As you already understood, Ikewood backup can be made by 2 ways - or in an iPhone, or through the Aytyuns utility. Recover data from this file will be successful, exclusively on the device itself, and only with the assistant. The device must necessarily have a network connection.

The assistant operating system settings is started only at the end of the smartphone firmware, and if the user wants to restore information in a configured gadget, it will start after deleting files and the corresponding settings in the reset menu.

Important! Deleting data and settings eaten from the iPhone's memory absolutely all the information, so before the operation be sure to make a backup.

Operation itself is carried out according to the following algorithm:

Selecting a data recovery option (at the activation stage, after the user is determined with the language, location setting, etc.):
Select the second item from the above list to download a copy from Aiklaud for the recovery procedure.
Connecting "Acclaud" Aiklaud (it is an EPL ID), Password introduction.
Two-time consent with the user agreement.
Creating a password for locking (the message about the need for this action pops up if the procedure is made from a copy with activated password).
Configuring Touch ID or Leaving at the time of this action, because It can be done and then, at any time.
Configure Touch ID for iTunes Store. and App Store..

Setting up a smartphone as a new device - to the source settings with the complete erase of all data.
Recovery from the copy of the Aiklaud, from backup filecreated by the storage.
Restoration from the copy of the Aytyuns is the same as in the version with Aiklaud, but the data will need to be downloaded from hard disk PC.

Further on the machine will be rebooting the system, and the display symbol and the status bar will appear on the display, which will be fill in. Then re-configure the location parameter, connect the aiclaud and make other necessary settings.

When the desktop is loaded, all iPP Store applications from the App Store, which were previously installed on the phone to the recovery procedure, will reinstate on the machine and become available for use.

All data contained in the copies will be in the iPhone memory. By the way, before the start of the backup operation, you can configure it - its functions are allowed, and the choice of settings is very wide.

And finally, the most important Council. Do not ignore the importance of copying, because you do not know what can happen to a smartphone at the next moment. It is especially recommended to make a "fresh" backup before the firmware.

Hey! The importance of backups on the iPhone, iPod or iPad is difficult to overestimate. They will help to return the data of your device (settings, notes, calendars, applications, games, SMS, contacts, etc.) if you unsuccessfully installed new firmware, Or just decided to update your gadget. When recovering an iPhone from a backup, you can not doubt - absolutely nothing will disappear. All data will be transferred entirely and completely.

In order for us to restore the iPhone from the backup, the first thing you need to create this very copy (yes-yes-yes, the author of these rows is the captain of obvious). How to do it? Apple company invented two beautiful ways.

So, you can:

« cloud storage"(Excellent option, but Wi-Fi connection is necessary).
Using (only a computer and a complete cable for iPhone are required). If you still do not have this useful program, running and.

It is important to remember that for the "clouds" its backup, for iTunes its own. They do not intersect and not interchangeable.

How to return the data by applying iCloud, read. And now we will analyze how to restore from the backup of the iPhone using iTunes.

Several important comments:

The procedure must be done on that computer, where your device is usually synchronized. And accordingly the backup is stored.
Return the firmware, therefore, do not work out. That is, if you have once saved from iOS 6, and then updated on the 7th version of the firmware, then when restoring, such data as notes, contacts, messages to you return, but previous version software - not.
You need to turn off the "Find iPhone" function. Otherwise we obtain a warning about the impossibility of the operation.

The first thing to do is to connect the apple to the computer. ITunes program Starts automatically when connected. Did not start? Two times click on the label.

In the main window, we see the firmware number, and other useful information.

I lower the look below, find exactly what we need.

We choose - restore from the copy.

We are asked - what exactly we want to use. We are determined and click on the cherished button.

It remains to wait a certain amount of time.

How many? It all depends on the size of the backup. The more data is stored in it - the longer than time Recovery :) I had a case when I had to wait about four hours. Long? Of course! But nothing can be done...