How to restore iPad via iTunes: detailed instructions. Ways to flash or restore iPhone yourself

Restoration through iTunes is the extreme measure that the user is taking unless if it cannot fix one or another software failure iPhone. Unfortunately, sometimes this procedure in turn is interrupted by an error. What should I do if you can't restore the device through iTunes? This article will answer the question.

In general, there are two ways to restore an iPhone through iTunes programs. The first way is "Light" - he assumes that your device is still operational, but, for example, it is a bit buggy, and you want to remove all bugs by recovering. In this case, you need to connect the iPhone to the PC with the iTunes installed, wait until the program recognizes the device (that the gadget is defined to signal the appearance of an icon in the form of a phone in the main program menu), go to the "Overview" section and click the Restore button iPhone.

It is very simple, however, there are situations and worse. For example, you set the iPhone to be updated, but they forgot that the charge is not enough and it turned off when the update was not fulfilled, and now the smartphone refuses to respond to any actions, including it does not turn on. Or, for example, you decided to put a program from a unverified source, and there was a virus that turned, again, the device in the "brick", refusing to even turn on. Are there any chance in such situations to return the smartphone into a working condition?

Do not be afraid, the way out of this situation is available - you just need to translate the device to one of the emergency modes - Recovery Mode or DFU. The first is activated through the platform, the second at the hardware level. That is, if Recovery Mode does not respond, DFU will always come to the rescue.

To activate Recovery Mode, clamp button Home.In addition, without releasing it, we connect the device to the PC with iTunes, when the program icon and the image of the charge cable lights up on the smartphone screen, let go of Home. At the same time, iTunes will report an iPhone detection in recovery mode and will suggest run the recovery process.

To transfer the smartphone in dFU mode - Click HOME + POWER, after 10 seconds, we release, connect the iPhone to a computer, and we wait until iTunes signs about the detection of the device in the recovery mode (on the screen of the device itself should not appear any icons!), After that, let's release home and run. procedure.

What if iTunes could not restore the iPhone?

Unfortunately, sometimes for some cause iTunes. Could not execute the recovery procedure - it is interrupted by an error. Do not worry, this is not the end of the world, most likely, the situation is easily corrected.

The reasons for which iTunes refuse to restore the device may be much, but most often the problem is programmed.

Therefore, first of all, you need to restart the program and computer, and if your iPhone is not in a brick state, retest and it. Perhaps after that, just a step, you will succeed.

Software Update

If the reboot does not help, you need to make sure there are no conflicts of the software - first of all, check which version of iTunes. Installed on your computer, perhaps the program simply needs to be updated. Also, it will not be superfluous and all the rest of the software installed on the PC. You are not even presented as often, outdated programs become the causes of certain failures.

Update on Windows PCs you can contact the "Start" menu to the center windows updatesAnd on Mac you need to go to the "Updates" section of the App Store.

Disable protective programs

Another frequent cause of conflict is too responsible for the work of antivirus programs. Perhaps your firewall or antivirus brought iTunes to the list suspicious programs And prevent her work. To check whether this situation is relevant in your case, disconnect all the protective programs for the recovery time.

Edit Hosts file

And finally, another reason for software failures - errors hosts file. I will not start in long clarification, what is the file and why it is needed, it is not so important in this case. You only need to make it correct. How? In this article site apple support You can read how to find and adjust the file on Mac, to find Hosts on Windows will help this article, and the order of editing will be the same as for Mac.

Hardware problems

If you are not lucky and the iPhone is not restored, despite the fact that you have conducted all the measures described, it means that it's time to suspect a hardware problem. First of all, you need to use another USB port for connections iPhone. If this does not help, it is possible that the case in the connecting cable is, in this case, it is necessary to use either the original wire or with MFI marking, which means "Made for iPhone".

If the cable and ports are all in order and the program reasons you excluded, but the recovery is still interrupted, perhaps the problem in the PC itself or iPhone. Try to use another computer if the recovery will be interrupted on it, it means you're time to take your "apple" in your hands and go to the service with him.

Suitable

Using the recovery through iTunes, you can fix certain iPhone glitches, but sometimes it is not restored. Why still an iPhone is not restored via aytyuns? There may be many reasons for both software and hardware. If you could not eliminate the problem yourself, we recommend first to contact Apple's support service, and if it does not help, carry the device to the service and, we hope that it will still be able to make restored!

If a jailbreak was held on the iPhone, or you fear that after updating the firmware, errors in the work of the smartphone are detected, then restore the device with a standard way in the event of failures fail. Installing the latest version of the firmware will necessarily be produced - an in a different iPhone is not officially restored.

What happens when resetting?

When dumping iPhone settings The factory state is removed and lost:

All user data.
Establishing a program, tweaks, utilities.
Access to file System Apparatus (Jailbreak).

The firmware is updated to the version current at the time of resetting the settings and content, that is, you get a completely clean phone with the last editors of the iOS, but without jailbreak. But if the jailbreak has already been performed before reset, then use additional tools to restore the iPhone without updating the firmware.

Before performing any action with the recovery of the iPhone, create a backup of the data. Remember that everything will be deleted: from notes and contacts to video and photos.

Semirestore.

One of them very simple ways Restore iPhone without updating the firmware and jailbreak loss - use the Semirestore program. This tool places certain requirements for smartphone and computer, but they are extremely democratic:

The iPhone must be installed on the firmware above 5.0 and the set of components of OpenSSH (the corresponding utility can be downloaded for free in Cydia).
On the computer should stand windows system XP SP3 and above, iTunes I.NET Framework 3.5.

During operation, the utility is recommended not to run programs related to Xcode or iTunes on the computer. When recovering the iPhone, it will reboot several times - this is the normal behavior of the device. IPhone restore order without firmware update:

Wait until the program finishes restore iPhone.. The smartphone will be restarted, after which it will boot yourself. No update will happen: the iPhone will remain on the same version on which he worked before reset. Settings and user files will be deleted, but Cydia will remain operational, that is, the jailbreak does not flit.

Restoration without a computer

If there is no computer at hand, you can recover an iPhone using a Cydia repository, which is called ilexiNFO. You can find it at cydia.myrepospace.com/ilexInfo/.

After installing ilexInfo:

When a person tries to restore his iPhone, but problems begin, many questions arise. To use the device in as usual mode And troubleshooting, you need to figure out for what reason one or another error appeared and what it means.

Description of frequent errors when recovering iPhone

1. One is frequent questionsThat users ask, is: "What if you failed to restore the iPhone, the error 3194 prevents this process." This means that the iTunes program cannot request the desired SHSH from the server. You can solve this problem as follows: You need to check the version of your iTunes program and set the last one. Most often it is a solution to the problem. After that, restore the phone.

Increase

Another method is executed if the previous one did not show the results. It is done easily:

It is necessary to exit the program and find the hosts file in the C: \\ Windows \\ System32 \\ Drivers \\ etc \\ folder.
Next, you need to open the file notepad and delete the string "74.208.105.171 gs.apple.com", after which save the document.
After that, you need to connect the device to the computer, running iTunes and enter the DFU mode.
To do it hold the lock button and, after 3 seconds, hold the main one with it. Next, after 10 seconds, let go blocking and wait, not the release of the "Home" button. You will see a gray screen on your device.
After that, you can re-try to restore the firmware.

If this all happens, it is best to delete a string from the HOSTS file and will later be updated from the official servers.

In the same way, there is a system restoration with help special programsFor example, Tinyumbrella, which will help to eliminate the problem.

2. When your iPhone does not want to recover and error 1 appears, there may be several reasons.

You do not have the most a new version iTunes programs for this firmware.
You are trying to install a more outdated IOS system.

What to do in this case?

Update iTunes.
You can make sure that you use the most last version Firmware on the phone or just install the newest one.
It is also best to reconnect uSB cable to another port.
Try to restart the computer.

3. In case of error 9, the USB cable itself can be to blame.

Try to consider it in detail and check for breakdowns.
Try to insert into another port on your computer.
Restart the computer or take new cableTo make sure everything works.

4. Error 1015 is common when the version of the modem of your iPhone is changing to a smaller one. The problem appears if the Baseband device has more new numberthan the one in the firmware. To solve the problem, do the following.

After iphone change 7/6/5 on a new top model iPhone. 10 Many users wondered how to quickly transfer data from old iPhone to a new one. Of course, the most familiar for all is a way to back up all data on one device and the subsequent restoration of them on the other. This can be done through iTunes or icloud. However, not all this happened: some "users" report that the iPhone is not restored from the backup. Why this happens and how to restore data from the backup, describe in detail further.

It is impossible to restore the iPhone X from the backup

So let's figure it out why users cannot restore the data from the backup made on the old one. In order to transfer all the data from iPhone 7 on the iPhone 10, you must first make a backup of all information on the old iPhone.

How to restore data on iPhone X from backup iPhone 7/7 Plus

You can do this through iTunes by connecting the device using a USB wire and selecting the appropriate function in the program window. Or backup You can do through icloud. To do this, open the application to iPhone 7 Settings - Accounts and passwords -iCloud - backup inicloud., activate the slider and click Create backup.

After that, you remain with activation iPhone. Select the Restore function from the iTunes / ICloud backup and wait until the process is completed. If the iPhone is not restored from the backup copies iPhoneSo something went wrong.

I can not recover from backup via iTunes

The most important condition for successful recovery is the lack of conflict operating systems. On the phone installed new iOS platform 11. If the device installed the operating system below iOS 11.2 / 11.1 (for example, iOS 10 or iOS 10.2, etc.), then you will not be able to restore the device from the backup. It is necessary that iOS 11 be installed on both devices, but the firmware version is unimportant. Then do the following:

1. Update the iOS 11 update the iOS 11 firmware version.

2. Make again back up all data via iTunes or via icloud (as you comfortable).

3. After that, recover from the backup on the iPhone, specifying last file. Bacup.

How to restore data on iPhone X from backup iPhone 7 using Ultdata

If you still fail to restore the device from the backup standard, then you can use the program. It is created to restore remote and lost data and allows you to use three various methods. In our case, we can only use two ways - to recover from iTunes or ICloud backup file.

1. Back up all data on through iTunes or iCloud, as you are comfortable.

2. Download the Ultdata program to the computer, install and run. Then plug your iPhone with a cable to a computer.

3. In the program window that opens, select "Restore from iTunes Backup Files if you made backup to iPhone 7 using ITYUNS. Specify from the list of backup files the latter that you did in the first step just that. Select and click on the scan button.

4. After the scan is complete, you will be prompted to select the desired file types with the ability to preview.

5. Select and click on the recovery button. All files will automatically be saved on your new device.

The advantage of using the UltData program is the ability to restore not all data from the backup, and selectively - only those that are needed. You can use the tool on Mac, and on Windows. Also using the utility can be restored by chance remote files.

Return the iOS device to life after the unsuccessful installation of iOS 11.

The output of each new IOS version has always been accompanied by various problems associated with the transition to the update. Unfortunately, it did not exception from the rules. Many users iPhone, iPad and iPod Touch. Faced traditional errors when released: black screen, eternal apple, cyclic reboots, hanging lace iTunes. on the screen, etc. How to solve any problem that occurred when installing iOS 11 was told in this guide.

About IOS 11 Problems

Even when iOS 11 was not even at the test stage, Apple promised that the update would be less problematic and more stable compared to iOS 10. Now that the final version of iOS 11 has become available to users, we can state the fact that this is true. However, there are many problems in the system, most of which are quite easily solved. FROM full list The most frequently arising IOS 11 problems and ways to solve them can be familiar with.

In addition, in addition to its own unique iOS errors 11, it is inherent in classical problems of Apple mobile operating systems. The latter arise due to failures during the installation of iOS 11, which can appear both when updating the "air" and during an update via iTunes, let the case with the "clean" system setting and much less often.

We are talking about the following very often arising when installing IOS problems:

the iPhone hangs on the boot screen with Apple logo or iTunes.

A cyclic reboot is performed on the iPhone.
the iPhone stops turning on.

Because of what it would not happen the problem, which turned your iPhone, iPad or iPod Touch in the "brick", it can be solved. Fortunately, all listed problems are solved by one universal way.

Note: All problems described above can be solved in several ways, but we made an emphasis on the easiest, which will be able to use absolutely all users of Apple mobile devices.

When installing iOS 11, an error occurred - what to do

Step 1. Download free PhoneRescue utility on the official website of the program .

Step 2. Install and run the PhoneRescue.

Step 3. Select section iOS Repair Tools.and press the arrow in the lower right corner of the screen.

Step 4. If your iPhone, iPad or iPod touch is already in the recovery mode, for example, the Apple logo or iTunes logo on the screen, the utility will determine the device automatically. If not, then transfer to the recovery mode is necessary manually. To do this, disconnect the device and remove the USB cable from it, clamp the "Home" button and connect it to the computer with a USB cable, while holding the button.

Step 5. Select the Recovery Type of the two proposed:

Standard Mode - fixes most of the program errors, including hanging on the Apple, iTunes logo, cyclic reboot, etc.
ADVANCED MODE - restores mobile devices without loss, which hovering on the Apple logo and black screen, as well as program errors.

Step 6. On the next PhoneRescue screen will automatically determine the model and iOS version Connected to a computer device. If this does not happen, you will need to manually specify the type of device (iPhone, iPad or iPod Touch), model, model number and version of the installed software.

The model number of your mobile device can be found on its back cover.

Step 7. After the device data is correctly entered (automatically or manually), click Download To start loading the actual firmware to which recovery will be performed. Wait for the end of the download.

Step 8. Immediately after the firmware is loaded, the restoration of your iOS device will begin. Wait for her end. Important! Before completing the recovery process, do not disconnect the iPhone, iPad or iPod touch from the computer.

Ready! Yours mobile device It will make it possible to understand when recovery will be completed - it will turn on by requesting the activation and primary setting. So it's easily, without having to search and download the desired firmware manually, as well as excluding any interactions with hated many iTunes, the iPhone, iPad or iPod Touch is restored after software failures.

Due to failure when installing iOS 11, some information from your device can be removed. At the same time, if it was not previously created backup copy Missing data, then there is a risk to part with it forever. Restore the content remote during failure, however, you can, and with the help of the same utility.

How to restore remote in case of failure when installing iOS 11

Step 1. Connect your iPhone, iPad or iPod Touch to the computer.

Step 2. Launch PhoneRescue., click Recover from iOS Device And the arrow in the lower right corner to start the recovery process of remote data from the device.

Step 3. Select the data types you want to restore. PHONERESCUE allows you to restore contacts, call history, messages, notes, reminders, photos, videos, music, books and other different content. After you choose, click " OK».

Step 4. Wait for the end of the recovery process of remote files from your device as a result of an unsuccessful IOS 11 installation.

After the analysis is completed, select the data you want to restore and press one of the buttons in the upper right corner. The image button with the smartphone is responsible for recovering data immediately to the device, with the image of the computer - in memory of your computer.
Ready! You have restored data deleted due to software failure when installing iOS 11. It is noteworthy that the restoration is failed due to PhoneRescue. Almost all deleted files are subject to, since they were erased quite recently.