IPhone 7 hung on the iTunes shoelace. Causes and solutions When iTunes hangs when connecting iPhone

Y Many iPhone 7 users will appear USB cord and iTunes icon on the screen after upgrading to iOS 10 / iOS 11, usually in this case, it is believed that your device has already entered the recovery mode. After the series of "unknown errors", it came to the black screen with the image of the cord and ITYUNS icon, the service was told that the problem with the board. Or you have an iPhone 7 there was a problem with a black display where the cord appears and the icon in the form of a logo iTunes programs, after forced reboot, the phone does not react to anything at all and does not turn on and does not charge. This article is written, what to do, iPhone 7 hung on the iTunes shoe iOS updates 10 / iOS 11?

Free way to restore with Tenorshare Reiboot

Tenorshare Reiboot, the free program will solve your problems, iPhone 7 is in recovery mode and after updating iOS 10 / iOS 11 hangs on the icon. Connect to iTunes, Tenorshare Reiboot will help you exit the recovery mode, and your device is independently rebooted through some minutes.

For MAC OS X 10.9-10.14

First download and arrange a Tenorshare Reiboot on your computer. Connect the iPhone / iPad / iPod Touch to a computer using USB cables. Then Tenorshare Reiboot recognizes your device in recovery mode, click the "Exit Restore Mode" button. Wait a bit and the device will reboot safely. In this process, do not disconnect the device.

Solve hanging on iTunes logo in iTunes

The way to get rid of the black screen with the image of the cable and iTunes is to recover in iTunes, but it will erase all the contents, so creating backup Before using it.

Download and install Aytyuns on your laptop.
Open iTunes, connect the device to a PC using a USB cable.
Wait for the appearance of an iPhone image on the screen with a connected cable.
Press the "Restore" button in Aytyuns. The device will start working again as usual.

Repair operating system with Tenorshare Reiboot

Conventional way - forcibly restart, but after the forced reboot, which is used to exit normal mode Recovery, iPhone 7 still continues to load the black screen on which we again and again see the cord and iTunes. This situation means that the iPhone 7 fell into the so-called Loop Loop Mode (Recovery Loop). Hitting in Recovery Loop can occur for various reasons, for example, as a result of errors after updating or restoring the iOS 10 / iOS 11 firmware. Then you need to fix operating system.

Friends, cases of appearance USB cord and iTunes icon on the screen phones iphone, iPad tablets And the iPod players are quite common. In general, it is usually assumed that if the cord and icon appeared on the black display of one of these devices and the iTunes logo logo, it means that running mode Recovery Mode. But not everyone knows that the cable and iTunes, in addition to Recovery Mode, can mean Recovery Loop, which differs from the recovery mode.

In order for you to make an accurate diagnosis, determine the mode in which your iPhone is located (or other machine) displaying the USB wire and Aytyuns, we will show the results of your studies acquired as a result of these mobile apple devices. And it may be at least someone our meager knowledge will help solve their problem and restore the work of the phone or tablet.

Recovery mode - Normal

In normal mode recovery iPhone Or iPad is entered using simple actions, the sequence of these actions is painted here - "". To exit the usual recovery mode, we simply left the iPhone for a while, he rebooted himself and left the recovery mode. For immediate exit from the recovery mode (whatever you want) we are simply forcibly. It turns out that from the usual recovery mode, in contrast to others, it is fairly easy to exit using a reboot.

Recovery loop mode - obedient

There are cases that after the forced reboot, which is used to exit the usual recovery mode, the iPhone still continues to load the black screen on which we again and again see the cord and iTunes. This situation means that the iPhone got into the so-called Loop Loop mode (Recovery Loop). The phone or tablet in such a mode very often drives the iTunes program. Increasing in Recovery Loop can occur for various reasons, for example, as a result or restoring IOS firmware. The restoration loop may occur as a result of software, hardware or household failure (an example - accidentally pulled out the cable), once we ourselves, when they tried to lower the version of the IOS firmware from 7 to the 6th.

Why did we add the word "obedient" in the subtitle? Yes, because to get out of the obedient loop of recovery and return the iPhone to the working condition without loss of information, it is still possible, for this we used, some users have difficulties with Tinyumbrella, and we have found more convenient way Exit from Recovery Loop using the program. There are other programs to exit loops - Ireb and RecBoot.

Recovery loop mode - not obedient

If your iPhone or iPad gets into a naughty recovery loop, then, as a rule, not only forced reboot is powerless, but also the RedSn0W, Ireb, Tinyumbrella and RecBoot programs also cannot bring the iPhone from the recovery loop. As a result of the application of the programs of the above iPhone, after a reboot, the USB cable and iTunes logo continues. In this case, it is not possible to avoid the loss of information stored in the iPhone, but well, if earlier you too.

If you caught a naughty recovery loop, then it remains only to connect the iPhone to Ituens and try to flash it. Sometimes you can not flash the phone in this mode, then it is trying to flash it again. As a result iPhone firmware She erases all the information, and we made earlier. It happens that after the iPhone or iPad firmware is asked to enter someone's Apple ID and password, but this is a completely different story.

After unsuccessful flashing on the device screen, you may encounter such a problem as iTunes icon and USB cable. If you are updated via iTunes, you will see an error number in it that originated when firmware updates. Below are some types of errors that may appear in iTunes.

Enchanting iTunes errors in which the phone shows "Connect to iTunes"

Error 1.

The reasons :
You are trying to lower the firmware on the unsupported device or iTunes.
Decision :
Make sure you use the firmware for your phone, and use iTunes corresponding to the firmware to which you want to go.

Error 2.

The reasons :
Problem with ASR, as a rule, as a rule, the castomous firmware with hacctivation and anlokom in which poor ASR Patch (SN0WBreeze under 1.7 has this problem)
Decision:
Use another firmware.

Error 3.

The reasons :
Malfunction is likely to consist in a modem part
Decision:
It is necessary to diagnose in the service center

Error 4.

The reasons :
iTunes cannot connect to Apple service servers
Decision:
Most likely you need to check for Apple servers. Also worth paying attention to hosts file, in windows folder And conception to comment out "#" lines with various IP addresses.

Error 5.6.

The reasons :
The firmware cannot be installed either due to damage to the load logos, or due to the fact that the device is not entered into that service mode
Decision:
Very rare error, it is possible to avoid it using a re-start device in the DFU mode and download the firmware via iTunes by clicking the Restore iPhone / iPad button.

Error 8.

The reasons :
The difference in firmware for the device, also the error itself rarely "pops up", in most cases an error 3194 appears
Decision:
Try, substitute another version of the firmware, since most likely the previous firmware is no longer signed

Error 9.

The reasons:
Kernel Panic - core error when flashing, BSOD analogue ( Blue Screen death) on windows.
Decision:
Custom firmware appears in the same way. It is necessary to rebuild them or use others.

Error 10.

The reasons:
In the firmware there is no LLB (LOW LEVEL BOOTLOADER), without it, it is impossible to load the system.
Decision:
Do not use custom firmware without enhancing the modem from old versions of Pwnage Tools and Sn0wbreeze.

Error 11.

The reasons:
There is not enough BBFW in the firmware.
Decision:
Use another, or add the missing file to IPSW through the archiver.

Error 13.

The reasons :
USB cable problem or connectivity on the device itself, also an error appears when you are trying to install Beta version iOS
Decision:
View if there is no damage in the lower dock of your gadget, as well as on the cable itself with which you are trying to flash the device. If you are trying to upgrade to the beta version, try to use another or as possible to use OS X to install such a firmware.

Error 14.

The reasons:
The problem with the firmware after Jeilbreak, try to recover by custom pastry if it does not help - the problem is in USB.
Decision:
Recover with custom firmware, or port shift \\ computer

Error 17.

The reasons:
You are trying to "update" a caste on another custom.
Decision:
It is necessary to "restore", preferably from DFU or Recovery.

Error 20.

The reasons:
The device was initially entered in Recovery Mode and could not go to DFU
Decision:
It is necessary to start the device from the very beginning DFU mode and re-put the device

Error 23.

The reasons:
As a rule, iron error. It is also expressed by the fact that the phone cannot recognize IMEI or MAC address.
Decision:
Nest service centeror if you are satisfied with the iPod without WiFi and Bluetooth, then it will be used using iTunes 9.0.2 and this instruction

Error 26.

The reasons:
Nor did not check versions.
Decision:
Change the firmware file.

Error 28.

The reasons:
Problem with device memory.

Error 27 and 29

The reasons:
Cyclical error when recovering in iTunes 8-9.1
Decision:
Use last iTunes. or any version of iTunes for poppy.

Error 31.

The reasons:
The device cannot exit DFU mode
Decision:
Most likely there is a hardware problem with the device itself, for this it is necessary to diagnose the gadget

Error 37.

The reasons:
LLB in the firmware is replaced with analogue from another device model.
Decision:
Preset Caste or use another.

Error 39, 40 and 10054

The reasons:
Problem with access to activation and signing servers. In case of error 40, a problem with Nand memory, processor or RAM is possible.
Decision:
Try turning off the firewall and antivirus and flash again. If the error remains, it is necessary to carry the device to the service center for diagnostics, as the problem is most likely in the hardware.

Error 10 **

The reasons:
It occurs when DOWNGRADE / UPGRADE on BaseBand is different from what firmware has. This does not mean that the restaurant failed - she just tells you that the phone firmware does not match Baseband.
Decision:
Using The Frimeware Umbrella To enable the phone after an error (Kick Device Out of Recovery).

Errors 6 and 10

The reasons:
It comes due to the problem of your firmware - usually if you use unsuitable boot / recovery logo.
On the firmware 2.0 error number 6 may mean that you are not in DFU
Decision:
Fit to the new Custom firmware and use the correct boot / recovery logo or generally standard.

Error 1600 and 1611

The reasons:
Custom firmware is not calculated on DFU.
Decision:
Use Recovery Mode.

Errors 16 **

The reasons:
The firmware file signature test system is not disconnected.
Decision:
You need to do Jeilbreic before installing a custom, if you used Spirit, you must also disable the test signatures manually. To do this, set the Spirit2PWN package from Cydia.
Jailbreakme.com is not suitable for installing custom firmware.
If you put the iOS 4.1 caste and above from Pwnage Tools, then you need Pwned DFU - we make it through RedSn0W or Pwnage Tools

Error 1619.

The reasons:
iTunes can not imbued with your iPhone. It is too old for abota with your device.
Decision:
Update iTunes.

Error 1644.

The reasons:
Open firmware reading session.
Decision:
Do not touch the firmware file while iTunes restores your phone, make sure the Kheubt programs do not make manipulations with this file.

Error 2005.

The reasons:
Error in iPhone answers. As a rule, it is caused by mechanical damage.
Decision:
Check the dock.

Error 3004.

The reasons:
For flashing you need to connect to the Internet
Decision:
Make sure the computer is connected to the Internet and nothing prevents iTunes to use this connection.

Errors 14 **

The reasons:
Damaged fel firmware. Or USB port.
Decision:
- Download the firmware file from another source.
- Replace wire, port, computer.

Errors 20 **

The reasons:
Data cable failure or USB port
Decision:
Change the DATA cable, USB ports, if possible, try another computer.

Errors 3014.

The reasons:
Too for a long time Response from Apple Activation Server
Decision:
You must restart the computer / laptop, as well as "Restart" Internet connection

Error (-39)

The reasons:
iTunes can not download purchased music from iTunes Store.
Decision:
1) SET iTunes version 9 or higher.
2) If you use web accelerators, turn them off and restart the computer.

Error (-3221)

The reasons:
iTunes cannot be contacted with the iTunes Store due to the blocking of Failov.
Decision:
Change access and iTunes and iTuneshelper rights to unlock their data transfer with a remote server.

Error (-50)

The reasons:
An error occurs after the timeout of the sent request.
May be caused:
-Burdmen
-Faervolom
-Ad filters
-Antivirusami
Decision:
If you have a kakelibo program listed above Adjust them so that iTunes can contact iTunes.apple.com and ax.itunes.apple.com
If the error occurs when video content is loaded.
Remove Cache Video Downloads, it is in
Mac:
~ / Music / iTunes / iTunes Music / Downloads
Note: The Tilde (~) Refers to Your Home Directory.

Windows Vista:
\\ Users \\ Username \\ Music \\ iTunes \\ iTunes Music \\ Downloads \\

Windows XP and 2000:
\\ Documents and Settings \\ username \\ My Documents \\ My Music \\ iTunes \\ iTunes Music \\ Downloads \\

Find the file of the downloaded video, its extension will be temp (* .tmp)
Start the download first.

Error 9808.

The reasons:
Error with registration in iTunes Store
Decision:
Start - Control Panel - Browser Settings - additionally and mark SSL 3.0 and TLS 1.0 items.
After restarting the computer

Error 39.

The reasons:
Error trying to synchronize photos.
Decision:
Try to create a new album in iPhoto.
Keep the album empty and synchronize the iPhone only with this new album.
This will delete any photos that you synchronized the iPhone.
Now place some photos to a new album and synchronize the iPhone.
If synchronization passed well, add a few more photos and synchronize the iPhone.
Continue to pass this process until you get the same mistake.
If you get the same mistake, then you know that one or more photos in the last batch cause an error.

Error 13001.

The reasons:
Bitted file library iTunes
Decision:
Create new file. iTunes libraries - removing it and then opening iTunes and it will again create itunes library.itl

Errors 13014, 13136, 13213

The reasons:
Soft hole in iTunes
Decision:
Solution 1.
Make sure the computer is installed latest version iTunes.
Solution 2.
Close and re-open the iTunes program. If the problem has not disappeared, restart the computer.

Errors -1.

The reasons:
Error in the modem part of the device
Decision:
It is necessary to diagnose the device in the service center, since this error Not solved using the software of the repair.
Drive map in Apple Service at Sumy 82:

If you have any questions. You can contact us - or by calling the phone below. We will be glad to help you.

Our address:
Kharkov, Sumskaya Street 82

Schedule:
Monday - Saturday from 10:00 to 20:00
Sunday - from 11:00 to 17:00

No matter how reliably, Apple technician worked, the system failures are not alien to her. At the same time, you may encounter both a banal and not terrible glitch, for example, a "flying" application, and with full failure to turn on and connect to iTunes (ITYUNS). However, afraid so critical errors Also not worth it.

In this article we will tell you what to do if the iPhone asks to connect to the iTunes program.

In fact, the reasons for which the iPhone asks iTunes about the assistance to restore work may be not enough. Any serious software failure It can lead to this kind of "request", while completely unimportant whether you have a new iPhone 7 or good 4s - no gadget is insured from glitches.

Most often, IOS-device requests connection to a PC in case of unsuccessful update - for example, you decided to update the device, and it turned out to be not enough enough, and it turned off during the update. Or during the update process interrupted wi-Fi signal. In addition, the iPhone asks to connect to iTunes, if you critically entered the lock password times.

However, this is only a list of the most frequent reasons, in fact, there are many other grounds for the program failure we are.

What if the iPhone requires to connect to iTunes?

However, the cause of the failure is not the main thing, the main thing is to return the iPhone to the working condition. How to do it? Very easy! If the device requires connecting to iTunes - connect it to iTunes! Yes, here is such a Capovsky council. True, followed by several additions.

At best, such a scheme should work - the device asked the connection to the PC, you:

Open iTunes. If you are not installed this program, download it.
Take a charging cable, it is the same sync cable. Important moment - The cable must be either original or certified with Made for iPhone -MFI marking.
Connect the cable with one end to the smartphone, to another PC.
Perform a reboot of the gadget. On the iPhone 7/7 Plus for rebooting - clamp the POWER button at the same time and keep the volume button to appear on the Apple logo screen, on all other models - clamp the POWER + HOME button and do not release the "Apple" on the display.
When iTunes give a window about the detection of the device in recovery mode, select from the two "update" or "restore" buttons. In the first case, the most recent IOS firmware will be downloaded to the gadget, and the personal data will not be affected. In the second - the most relevant iOS is also installed on the smartphone, but all information will be deleted.
Everything! Now wait until the program will complete the update / restore - after that, the inclusion will be performed automatically.

Important moment! Of course, any user, even the one that stores backup copies of the data (what can be said about those who have neglected the operation), prefer to the 5th step of the above instruction to select the "Update" option, because it is not then to mess with the restoration of information from Bacaps.

However, unfortunately, in the case of serious system failures this option may be unavailable or it is available, but his choice does not lead to positive results. What to do in such a situation? Unfortunately, you have only one option - choose the "Restore" button.

What to do if the iPhone does not react to a reboot?

Unfortunately, if the program failure is directly critical, the iPhone may not react to a reboot when connected to iTunes. Is it possible to somehow exit this situation? Yes! Especially for such cases, Apple engineers provided their devices with two critical modes - DFU and Recovery Mode. Recovery Mode, let's say more light. So that you understand the translation of iOS gadgets in recovery mode Mode. similar to roll back Windows to the recovery point of the system, and DFU is something like reinstalling Windows. Recovery Mode. Works through software, and DFU refers directly to the "hardware".

If the iPhone does not respond to the Recovery Mode, then we perform this instruction:

Open iTunes on PC.
We take the iPhone and pinch the POWER and HOME buttons at the same time (the volume decreases on the "seven"). After 10 seconds, POWER let go and connectivity to the PC.
When iTunes displays a gadget detection window in recovery mode, you can release Home. Important moment! In DFU mode screen iPhone It will remain black - no signals should not serve. The only criterion of what you did everything right is to notice from iTunes.
Next, follow the steps of 5.6 first instructions.

We draw your attention, not everyone gets to activate the DFU mode from the first time, so do not give up and repeat the launch of the mode.

What if nothing helps?

If even DFU mode does not start, despite the fact that you have already done several attempts, and iTunes flatly refuses to recognize the device in recovery mode - it's bad. Perhaps it crept here no longer systemic, but a "iron" failure. In this case, we highly recommend you will contact the service center for diagnostics. By the way, in most services this procedure is free, well, or there is a symbolic 100-300 rubles. One way or another, it is better to pay than, without having the appropriate skills, open the device independently in search of the cause of the problem and only aggravate the state of affairs.

Y Many iPhone 7 users will appear USB cord and iTunes icon on the screen after upgrading to iOS 10 / iOS 11, usually in this case, it is believed that your device has already entered the recovery mode. After the series of "unknown errors", it came to the black screen with the image of the cord and ITYUNS icon, the service was told that the problem with the board. Or you have the iPhone 7 there was a problem with a black display where the cord and the icon appeared in the form of the iTunes program logo, after the forced reboot, the phone does not respond at all and does not turn on and does not charge. This article is written, what to do, iPhone 7 hung on iTunes shoelace after updating iOS 10 / iOS 11?

Free way to restore with Tenorshare Reiboot

Free program I will solve your problems, iPhone 7 is in the recovery mode and after updating iOS 10 / iOS 11 hangs on the icon. Connect to iTunes, Tenorshare Reiboot will help you exit the recovery mode, and your device is independently rebooted through some minutes.

Solve hanging on iTunes logo in iTunes

The way to get rid of the black screen with the image of the cable and iTunes is to recover in iTunes, but it will erase all the contents, so you create a backup before using it.

Download and install Aytyuns on your laptop.
Open iTunes, connect the device to a PC using a USB cable.
Wait for the appearance of an iPhone image on the screen with a connected cable.
Press the "Restore" button in Aytyuns. The device will start working again as usual.

Repair operating system with Tenorshare Reiboot

The usual method is forced to restart, but after a forced reboot, which is used to exit the normal recovery mode, the iPhone 7 still continues to load the black screen on which we again and again see the cord and iTunes. This situation means that the iPhone 7 fell into the so-called Loop Loop Mode (Recovery Loop). Increasing in Recovery Loop can occur for various reasons, for example, as a result of errors after updating or restoring the iOS 10 / iOS 11 firmware. Then you need to correct the operating system.