Library of standard subsystems. Implementing the Library of Standard Subsystems Update BSP 1C

Below we continue to disassemble the subsystems in the BSP configuration.

Subsystem for storage, loading and convenient location of the manufacturing calendar of the enterprise. Also, the subsystem allows to obtain such data as the number of working days to a certain date, etc.

22. Contact information

Subsystem for storing and displaying on the forms of contact information directory. As a rule, used in reference books: counterparties, individuals, organizations, etc. The subsystem is associated with the Address Classifier subsystem.

23. Control of dynamic configuration update

Designed to notify users about changes in configuration. If the configuration is changed, with some frequency it offers to restart the session.

24. User reminders

The subsystem is designed to install personal reminders about any object object and user alert at the appointed time.

25. Setting the order of elements

Designed to configure the order of the directory elements or the up and down buttons. If the subject is subordinate, then the numbering of elements is performed within the owner. If the Hierarchical Reference, then the numbering of the elements is performed within the parent.

26. Programs settings

The "Program Settings" subsystem provides the settings panels for all the library subsystems are located in the "Configuration and Administration" command interface.

27. Data exchange

The "Data Exchange" subsystem is intended to carry out data exchange between different configurations using the exchange rules and without using the exchange rules, as well as to organize data exchange in a distributed information database. Exchange little is reminiscent of the previous version of the BSP. The exchange of data between the configurations operating in the service model is supported, as well as between the configurations operating in the service model and in the local mode. Rules, as usual, should be formed in the configuration "Data Conversion".

Aza Data exchange settings in 1C using the "1C data conversion" configuration on the example, see the video:

28. Messaging

The message exchange subsystem is intended for integrating heterogeneous information systems on the 1C platform: an enterprise by exchanging messages. The subsystem should be used when the data channel is unreliable. The subsystem is not a replacement of data exchange technology, web service technologies and external connections. New feature in BSP.

Get 267 video tutorials for 1C for free:

29. Updating version of IB

Used in all typical solutions. Not much different from the last version of the Library of Standard Subsystems. The "UP version update" provides a software interface for performing procedures for handlers to initially fill out and updating the information base data (IB) when changing the configuration version, and also allows you to display a change in the new version of the configuration.

30. Configuration update

The subsystem is designed to automatically configure the information base in 1C mode: enterprises "on demand" or at the specified time in the future. We are talking about configurations. You can configure the automatic update of the configuration from your server.

31. Organizations

This directory is used in almost all configurations. It is very important that it was unified.

32. Sending SMS.

The subsystem represents the finished functionality for sending SMS messages by means of 1C. By default, the subsystem supports work with MTS and Beeline operators.

33. Processing productivity

Designed for an objective assessment of the integral performance of the APDEX method. With it, for example, you can find out how much time spent a certain document, and in the future to get statistics during the time.

34. Print

The subsystem is designed to print layouts of tabular documents and office documents layouts (MS Word, OpenOffice).

35. Full-text search

Designed to activate a full-text search in the system. Contains the search interface and some regulatory operations for text data indexing.

36. Getting files from the Internet

The "Obtaining File File" subsystem adds a programming interface to the configuration to receive files from the Internet using HTTP, HTTPS and FTP protocols and save the files received on the client, server or in the temporary storage.

37. Users

The subsystem is designed to view and edit the list of users and external users of the system (elements of directory users and external users), which are synchronized with the list of users of the information base.

38. Prefixation of objects

Designed to prefix database objects. The prefixing of objects is carried out in the cuts of information bases and elements of the organization's reference book.

39. Attached files

The subsystem "Attached Files" provides a means of working with attachment files connected to arbitrary objects of the reference type information base. Storage of files can be organized both in the information database and exterior - in volumes (network resources).

40. Check the legality of receiving updates

The subsystem "Checking the legality of receiving updates" allows you to request the user a confirmation that the update files were obtained by a legal manner. It can be used both before updating the information base (after the update has already been applied to the database, but before the first launch) and immediately before updating the configuration to the configuration update subsystem.

41. Work with email messages

The "Work with email messages" subsystem adds a programming interface to the configuration to send email messages, as well as a user interface to support email accounts.

42. Working with files

The "Working with File" subsystem is intended for collective editing of arbitrary format files in the folder hierarchical structure. File storage can be organized both directly in the information database and exterior - in volumes (network resources). Together with the file, the history of its changes (file versions) can be saved.

43. Mailing reports

Subsystem "Reports" allows you to configure distribution of reports and reports of the subsystem "Additional reports and processing" subsystem. Mailings can be executed as a schedule (if the program works in client-server mode) and on demand.

44. Regulations

The regulatory tasks subsystem allows you to edit the composition and schedule of regulatory tasks, view the history of the execution of regulatory and background tasks, as well as analyze errors when performing them. If the system is deployed in client file mode, the administrator has the ability to configure the execution of regulatory tasks using the command setting the processing of regulatory tasks processing the regulatory task console.

45. IB backup

The "Backup IB" subsystem allows you to back up the information base from the 1C mode of the enterprise "on demand" or in accordance with the customized schedule. Also, using this subsystem, you can restore an information base from the backup.

46. \u200b\u200bProperties

The "Properties" subsystem allows you to create and edit in 1C mode: Enterprise Additional properties of arbitrary configuration objects. Objects with properties can be any reference type objects. The subsystem allows you to implement both one set of additional properties for all instances of the objects of the same type and several sets of properties for the objects of the same type.

Additional properties of objects are divided into two categories:

● additional details;

● Additional information.

47. Subordination Structure

The Subordination Structure subsystem provides the possibility of an output from the form of a report on parent and subsidiary documents of the current document, as well as on their relationships.

48. Access control

The access control subsystem allows you to configure user rights for arbitrary information database data (elements of reference books, documents, records of registers, business processes, tasks, etc.). It is possible to limit rights both for individual types of metadata objects and at the level of entries of one type of object. In addition, for individual objects of the information base, it is possible to individual access rights to the operating system files folders.

49. Management of outdoor

The subsystem "Management of the results and aggregates" provides funds to administer the outcome and units of the information base registers. The subsystem allows you to perform both typical administrative operations and gives access to all possibilities:

● Enable / disable the use of outcome and aggregates;

● separation of results;

● installation of the period and recalculation of the results;

● rebuilding and updating aggregates;

● Calculation of optimal aggregates.

50. File functions

The "File Functions" subsystem does not have independent applied value. It includes shared file functionality (functions, common forms, etc.) used by subsystems dependent on it (such as "work with files", "Attached files", "Data supplied").

51. Individuals

The subsystem "individuals" is intended to unify the names of metadata objects common for typical configurations. It contains only determining metadata objects and their basic implementation.

52. Electronic digital signature

Version 3.0.1

New in version 3.0.1.80,3.0.1.81

Updated library of standard subsystems to version 2.3.3.77
A tab "Recalculation of prices" has been added to the position form, where you can calculate the basic price of material or equipment from the current price or vice versa. This feature is available only for positions-materials and position-equipment
Added overall settings "Round the basic standards of overhead and estimate profits to the whole"
Added functional option "Allow editing estimates, closed acts". When it is turned on, a warning is issued "This option can lead to a discrepancy between the planned and actual indicators. Do you want to include the opportunity?". Partially or fully closed acts of position in the estimate are displayed in red. If the "Show column of total from the start of construction" flag is enabled in the user settings, the "volume from the beginning" column is displayed on the form of the local estimate. On the form of a local estimate, you can change the amount of work on the position, and the results will be recalculated by position, section, estimate
Added functional option "Confirm Excess Act Volume". When it is turned on, if the user sets the volume by position greater than the difference in the amount of estimates and already closed volume (from the beginning of construction), it is proposed to enter a link to a confirmation document (select a file attached to the act or download) and, if necessary, comment. Also, if the user on the resources tab or on the form of a resource flow rate of the act specifies the actual resource consumption more than the expense is normal, then it is proposed to either enter a link to a confirmation document and comment (as well as the scope of work), or indicate that the write-off occurs at the expense of previous periods and choose the appropriate act
Fixed identified errors

New in version 3.0.1.71.3.0.1.72,3.0.1.73,3.0.1.74,3,73,75,3.0.1.76,3.0.1.77,3.0.1.78,3.0.1.79

Added the ability to set up the selections in the report "Vestitude of the resource need"
Updated library of standard subsystems to version 2.3.3.76
A new configuration protection system is used.
Implemented the ability to copy consolidated and object estimates with subordinate speed and acts
When the resource price history changes, the list of users who changed changes are stored for the same date.
Added a report "M-19" required to actually write off materials and comparison with data on accounting
Added report "Help on completed works"
Added functional option "Use the limited costs of subordinate local estimates". If this option is enabled, the limited costs of the local estimate when adding it to the object estimate will be taken into account when calculating the estimated cost of object and consolidated estimates.
On the form of processing "AWS Purchasing Service" appeared the opportunity to choose the area to set resource prices

New in version 3.0.1.61,3.0.1.62,3.0.1.63,3.0.1.64,3.0.1.65,3.0.1.66,3.0.1.67,3.0.1.68,3.0.1.69,3.0.1.70

In the user settings, the "Request" parameter has been added. If the flag is removed, the positions are added to the estimate without refinement in a separate dialogue.
You can enter the volume in group processing up to the 10th mark to the comma
Accelerated the procedure for building a tree on the "Composition" tab and adding positions to estimates with a large number of positions
Implemented an output of the statement of the need for resources with ranking in the order of descending of their total cost in basic or current prices
Forms of resource lists and regulatory collections are derived from complete names instead of short
Implemented the ability to conduct an examination of the estimated rates
On the form of a local estimate to bookmark the "Composition" it is possible to output additional position details. The ability to change the additional details of the positions and sections of local estimates has been added to group processing.
Fixed configuration errors fixed

New in version 3.0.1.51.3.0.1.52,3.0.1.53,3,52,3,54,3,53,55,3.0.1.56,3.0.1.57,3.0.1.58,3.0.1.59,3,58,3.0.1.59,3.0.1.60

Implemented the possibility of unloading information about volumes from local estimates to MS Project files
Implemented the ability to create estimates "by template". To do this, you need to create entries that will specify how the new estimate created by such a template will look like, specify the composition of the sections, the main details, a set of limited costs.
When creating new acts, the replacements of resources produced in acts were taken into account
When copying a construction object, it is possible to copy all the estimates belonging to it
When local estimates are added to the object estimate, the list of local estimates of the current construction is shown. Also provided the possibility of selection of estimates for any selected construction site
Group processing of positions can now be used to work with object ratifes
The possibility of extended versionation of local estimation with version storage both in the current information base and in the external SQL database is enabled. Versioning is included in the system settings, the estimat version can be saved when recording or approved estimates, as well as the regulatory task on schedule. Rollback is possible to any version or restore version as a copy of the current local estimate.
Added the ability to select multiple resources from the resource directory to insert in the estimate, followed by entering the number
Fixed configuration errors fixed

New in version 3.0.1.50

Implemented the possibility of unloading information about the scope of work from the local estimates to the MS Project files

New in version 3.0.1.48,3.0.1.49

Fixed exchange errors
Fixed bugs to build a journal of accounting of work performed on shoots that have adjustments
Fixed copy error through the clipboard of the attached position. If a section is copied with subsections, then with a positive response to the question "copy sections with positions?" Copying all subordinate subsections and positions
In the report "Resource Consumption Report (M-29)" Added the ability to selection by the type of resource
Added reference book "Number of estimator" containing numbers and names of the estimates. The recording of the "numberator" requisite has been added to the construction of construction objects. If the numbering in the object is specified and a new local estimate is created in it, its number and name is filled according to the template with specific values.
On the form of a local estimate, the "Position Check" button is added to control the completeness of filling the props of positions after loading estimates from other sources. Information on positions with empty details of code cipher, determinant, scope of work, unit of measure is issued in the protocol
When calculating the basic-index method (according to cost elements), the possibility of using indices to the full cost of work on sections is implemented. For the level of rates, the use of the index to the full cost of work is possible to positions that do not have a resource part

New in version 3.0.1.44, 3.0.1.45,3.0.1.46, 3.0.1.47

Fixed a number of errors associated with user rights in the system
In the workplace of the procurement service specialist, the ability to quickly select and sort the resource list has been added.
In the user settings added flag "Do not add zero volumes to the estimation to the residue." If it is set - in the estimate to the residue, positions with zero volumes do not fall
Added the ability to create arbitrary additional details for the reference book "Objects of construction" and documents "Local estimates"

New in version 3.0.1.43

Fixed a number of errors arising when removing estimates
Sorting the reference book "Regulatory collections" can now be carried out not only by string representation of the cipher, but also by code. The code is filled on the base of the cipher to properly streamline rates within the hierarchy
When copying positions from the adjustment estimate, the adjustments information is cleaned
Added the ability to maintain additional details for the reference book "Objects of construction"
Fixed access restriction errors for the "EXCHANCE" role in the system
Fixed resource directory numbering errors

New in version 3.0.1.41,3.0.1.42

Fixed a number of errors of the report "Magazine performed" in the formation of it with adjustment shoots

New in version 3.0.1.40

Added processing "Removal of marked estimates". With it, you can remove the estimates marked earlier. All selected estimates are removed with all connected documents (sections, positions, acts)
Produced Speed \u200b\u200bOptimization System

New in version 3.0.1.39

Fixed errors of removing local estimates and sections with limited user rights
Current prices for resources are stored in the context of dates, and not months
In the workplace "Price editing tool" is available to establish a single price for all selected strings on the "Set price" button.
Implemented the ability to change the volume of unaccounted resources on the Resources tab in the act of work performed. Volumes change proportionally in the materials on the "Composition" of the same act
Fixed errors of calculating the act of work performed

New in version 3.0.1.38

In general settings, an option appeared: "Use supplies of supply". When this option is enabled, you can activate the possibility of entering applications for missing materials.
For each organization, you can ask a list of responsible for supply for supply, new applications will come to their email (provided that the option "Use Supplications" is included)
On the document panel "Local estimate", "Act of the work performed" and the "Position of the local estimate" command "Lacks the material in the catalog" appeared. When you click on it - the user is invited to fill out an application for adding materials to the catalog and send it to the responsible
The author of the document is now populated independently of whether the document was loaded or was created interactively
Fixed errors related to user rights in the system
Updated exchange with mobile application

New in version 3.0.1.36, 3.0.1.37

On the form of the Act formulation, it is possible to display either all the estimates of the estimates or only positions for which there was no execution (zero actual volume), or only positions with nonzero actual volume (hide positions with zero actual volume)
Added a new reference book "Templates of construction objects". The template is the structure of subordinate elements (for example, construction queues or structure by type of work). When creating a new construction object, if you use the template, the structure of the subordinate elements from the template is automatically created. The "Template Settings" item is added to the user settings, from which you can open a reference book of construction object templates by hyperlink
On the form of the composition of the executed work, the work of the actual volume of only the selected positions is implemented on the remnants. Earlier on the remnants filled the volume in all positions
Fixed copying error, create adjustment or estimates "to the residue" of estimates included in the object or consolidated estimate. The newly created estimate is not part of the consolidated or object estimate (the iDodel is not copied)
Improved algorithm for calculating the limited costs of direct costs, for example, if it is necessary to calculate the cost of the sum of the total output without taking into account the value of the materials

New in version 3.0.1.35

Added the ability to insert positions from the "Resources" directory to the "Composition" tab of the document "Local Estimate" document. The button selects the positions from the directory in the estimate
The possibilities of the clipboard are finalized. Now inserting positions from reference books can be copied to the clipboard and insert into the tree on the "Composition" tab
On the "Composition" tab of the local estimate in the status bar displays information on the set of selected strings - the results by section, estimate, dedicated positions
Fixed calculation errors of estimates with several invested sections
The report "Vestitude of the resource need" can now be a set of estimates of one object. To do this, when installing the switch "By Object", a list appears to select the estimation by which the statement should be formed

New in version 3.0.1.33,3.0.1.34

Added new report "Resources Accounting Journal". The report shows information on the planned and actual consumption of resources at the facility or in the estimate
The possibilities of the clipboard are finalized, now can be copied from the estimate in the estimate.
Fixed access errors for users with "Smetchik" roles
Fixed access errors for users with the roles of "Smetchik". Fixed access errors to object objects for limited rights roles

New in version 3.0.1.32

The configuration added a new role "Specialist of the Purchase Service" and an automated workplace of this specialist. Using the workplace it is possible to monitor and set the current prices for the resource for further use of them in the estimates and acts of work performed. The formation form provides the ability to transfer the price values \u200b\u200bof the previous period to the current
Fixed resource deletion error. Now the "Delete" command appeared in the resource resource table
Fixed an error of adding folders to the HP and SP standards reference book "
For the user with the rights of the "Smithchik" added the ability to work with group processing of positions from the form of the estimated document and unloading documents to various formats
Open the possibilities of selection and sorting on the form of resource directory

New in version 3.0.1.31

The form of the estimate has the ability to copy the position to the clipboard from the context menu or the Ctrl + C key, after which the position can be pasted into another section of any estimate
An additional point of importing the estimated document is implemented (when the format is not known), the "Other ..." is added to the import menu. When you click, it is proposed to select any file. The system is trying to determine the format over the selected file and if the download is possible - the desired download processing
Simplified Loading Factory Documentation Format Grand Documentation Format
Added column "total from the beginning of construction" on the form of an act of work performed. The display of the column is turned on in the user settings of the flag "Show in the act of a column of total from the beginning of construction"

New in version 3.0.1.30

A transition to the library of the standard subsystems version 2.3.2.53
Fixed the error of the autoloading of current prices and the recalculation indexes from the ADM when inserting the position "by code" and using fragments. Previously, the current prices for "tied" resources did not boost
The possibility of entering the volume formula on the form of a local estimate formula is implemented. It is believed that the formula is introduced if the expression begins with the sign "\u003d"
Fixed a number of errors on downloading estimated documentation from third-party programs
In the "Actions" menu on the form of the local estimate, the action "Copy" is added. When this action is selected, there is a group processing of positions, where the current section or position is already allocated and the "Copy to section" action is selected. It remains to click the "Run" button and select the section or estimate to copy.

New in version 3.0.1.29

Fixed a mistake of the formation of "Vedomosti need for resources". When choosing a group of objects, a consolidated statement for all objects included in this group

New in version 3.0.1.28

Fixed a number of errors on access to shoots at the entry level
In the report "Vestitude of the Resident Resolution" report, it was possible to choose not only the estimate, but also an object (object group) in the settings. In this case, all resources of the estimate of the object fall into the statement
The estimated documents have the opportunity to indicate the statuses "Project", "agreed", "Chernovik". Approval of documents is possible only in the status of "coordinated." To enable statuses, you must specify the corresponding flag in the settings
Fixed a number of errors on downloading estimated documentation from third-party programs

New in version 3.0.1.27

Added column "Cost" in the table of resources of the local estimate and the act of work performed
Added the ability to enter the estimates "to the residue". Estimation on the residue is created in volumes, not yet closed acts of completed work on the "Create" button - "to the residue" from the shape of the estate
Fixed a bug that occurs when replacing position resources. Now prices and relices of resources are tightened correctly.
On the form of a document "Local estimate" and "object estimate" added link to a higher document (if the current document is part of the object or local estimate)
Fixed a bug of a group of positions, when in the volume editing field it was impossible to enter more than 3 digits.
When adding resources to the locked estimate position, you can now enter the name of the resource, the system itself will offer options for selecting resources with similar names.
The error of the KS-6 form error occurs when choosing a estimate marked for deletion. Similar changes are made in other system reports.
After adding limited costs to the consolidated and object estimate "on the fly", the cost indicators are calculated, which immediately appears on the tree of the estimated document.
Fixed error displaying the values \u200b\u200bof limited costs in object and local estimates
Changed the procedure for working with current price catalogs. Now the current prices are tightened not only from the external regulatory framework, but also from the internal directory (branded) only when the "Auto-loading of current prices" is enabled on the form of the estimated document. Changing the date leads to the question of recession of prices, if you answer the affirmative, then prices will be updated by the new catalog. On the Forms of Documents "Local Estractions" and "Act of the Works Completed" added buttons to forced updating current prices for resources and indexes from the population index directories.

New in version 3.0.1.23,3.0.1.24,3.0.1.25,3.0.26

Fixed a number of errors of downloading estimated documentation from third-party programs
Implemented the possibility of loading estimates in an ARPS format and XML Grand estimate from the catalog list
Implemented a new role "Smetchik-NSI" in the system. Users with this role can edit regulatory directories of the estimated subsystem

New in version 3.0.1.22

In the table part of the "RESOURCE RESOURCES" added details of the "Name of the Resource" and "Unit of Measuring Resource". Details are designed to store user names of resources modified after editing the name of the resources received from the directory or obtained when loading the estimate from other programs.
In the position of the estimates and in group processing of the positions, it is possible to replace resources resources from regulatory collections
Additional flags have been added to the ARPS exchange settings for prefixes of rates and resources:
Do not discard the prefixes - when the flag flag is enabled, the type of collection will be determined, the determinant, the view of the resource, but when saving the position (resource), the cipher (code) is saved along with the prefix.
Create entries in the directory - if the "Create new entries" flag is set on the download form, the corresponding entries will be created when the flag is enabled.

New in version 3.0.1.21

If the estimate of the estimates has tied resources, then when changing the volume of the parent position, the question is asked to "change proportional to the volume of attached positions?". With the affirmative response, the new work of the affected resource is calculated as the old work of the position of the position * the new volume of the work of the parent position / the old volume of the work of the parent position. If necessary, the formula for calculating the volume of the associated resource changes in proportion to
In the reports of the "Resource Statement" and "Vestitude of the Resource Requirements" implemented the ability to display only actually consumed resources (the flag "Only actually consumed resources")
When replacing resources with removal of rates, the replaceable resource remains in the PM position and a new position-resource is formed with a negative volume, i.e. The actual resource consumption is 0, but in the statements they fall into different groups of "project resources" (with a negative volume) and "Materials" (with a positive volume).
If this flag is included, then when forming a statement, they will not be displayed resources issued for the rate with a minus sign, and the relevant resources taken into account in the rates, i.e. mutually exclusive resources if their volumes coincide in absolute value
Added a layout to fill the reference book "Prefixes of rates" when you start working with the program
Fields "Customer", "Contractor", "Investor", "Author", "District". To configure the content and appearance of the shape of the tree, use the "still" button - "Change shape". Using settings, you can display the desired fields by checking the boxes next to the names of the form items, hide the unnecessary fields, removing the checkboxes, change the setting of the fields with the "Up" fields, "down"

New in version 3.0.1.20

As part of the local estimate, the ability to move the current position to the beginning or end of the partition by pressing the appropriate button on the toolbar are added. If there is a need to move the position after a specific position, you can drag it by dragging the position in the right place
In the estimate of the estimate added the ability to highlight the position to other color, the default is black color. The color selection is made by sequentially pressing the color marker button in position. On the form of a local estimate form, the ability to display only marked positions is added. When a specific color is selected, the positions marked by this color are displayed, when you select white, all positions are displayed, when the black is selected, the color was not assigned

New in version 3.0.1.19

Implemented the possibility of calculating the current price of resource-positions from the basic price and on the contrary using the coefficients (formulas) of recalculation. Calling processing is made from the "Actions" menu on the form of a local estimate, the clause "Calculation of the current / basic price". For group processing of positions by section or estimate, you can select positions for the price: all, with zero basic or zero current price. For the marking of selected items, you can use a filter by part of the code or the name of the resource. Recaling coefficients (including in the formula) can be assigned to a group of marked positions or set individually to each resource in the relevant graph. The basic price is calculated as private from the division of the current price for the coefficient of recalculation, the result of the calculation is preserved in the pricing formula. Current price is calculated as a product of the basic price of the coefficient of recalculation, the result of the calculation is preserved in the current price formula.
In print forms of local estimates, the calculation of the basic and current price is displayed if the flag "Print Pricing Formulas" is set
In the user settings added setting "Do not round VAT when rounding the summary value to rubles." When this flag is enabled, the VAT flag and all subsequent results are calculated with accuracy to kopecks. This setting is available if the results of rounding the total value to rubles are set.
Implemented the ability to print a local estimate in basic prices. In the print settings of the local estimate added the "Print price" flag. When calculating the estimated cost in basic prices, the coefficients and indices of recalculation in the current price level are not taken into account. In positions with a sign "not index", the basic value of the "EM" fields, ZM, "CM" is taken into account, when calculating the limited costs, the basic values \u200b\u200bof the limited cost are taken.
The "Print of intermediate results" flag has been added to the form of a summary estimate. If this flag is not installed, only accumulative results are displayed on the seal (totaling chapters 1-7, and till chapters 1-8, etc.). If the flag is enabled, the prints are displayed on the printing on the chapters for which the "Results on the chapter" reference is set to print.

New in version 3.0.1.18

Implemented the possibility of maintaining various resource directory in the Resource Directory, which allows using different resource encoding for different estimated standard bases. In the "Estimate-Regulatory Base" directory, the "Resource Group" requisition has been added, which determines which resource directory (resource group) will be used when working with the standards of this base
When selecting a resource for replacement from the resource directory, the basic and current price of the resource from the register of information "resource prices" on the estimate of the regulatory framework, the construction area and the date of current prices specified in the local estimate or the act of work performed
Implemented the possibility of entering the position in the section of the Code. The "Composition" form of a local estimate is added to the "Code" button, when you click on the estimate of the estimate, a new line is created in which you need to enter the desired position code. If the local estimate is indicated by the main estimate standard base (NGB to select prices from the resource directory), then the search for rates is made only in this estimate-regulatory framework. Otherwise, the location of the position is made in the entire external regulatory framework, which can take a long time, as a result of searching for the screen, a list of found rates from which you need to choose the desired one are displayed. Next is proposed to enter the volume of the position.
Implemented the ability to add a manual string to the object and summary estimate, using the "Add string" button on the form "Composition" of estimates. The user is allowed to enter only the results by types of work on the estimate previously calculated, for example, in another program, for inclusion in the object or consolidated estimate. The string entered manually is displayed as part of the object or consolidated estimate by another color.
A transition to the library of the standard subsystems version 2.3.1.86

New in version 3.0.1.17

Fixed a range of configuration errors

New in version 3.0.1.16

Added the ability to set the basic user settings (estimated default documents, calculation parameters, rounding parameters) used in creating new estimated documents, for construction sites (construction objects). You can specify the settings for the current construction object directly in the Detaway tree (Setting button) or clarify for a specific object in "Settings" mode -\u003e "User Settings" -\u003e "Specify for construction objects" by selecting the desired object.
Added new user settings:
Display prefixes - if the flag is enabled, then on the form of a local estimate and an act on the "Composition" tab of the position of the position is displayed with the prefix;
Do not show the form of unaccounted during the selection - if the flag is enabled, then the form after selecting the positions from the VNG and the regulatory collections, which displays the refinement for unrecorded resources is not displayed;
Insert unaccounted resources automatically - if the flag is enabled, then all unaccounted and "on the project" resources are inserted "as is" when the flag is enabled "Do not show the form of unaccounted during the selection." If both flags are disabled, then the insertion of unaccounted resources is not performed.
In the form of a local estimate on the "Composition" tab, the Version of the SNB is displayed under the encryption of the position, from which the price is taken
On the form of a tree, the estimate is implemented the possibility of copying the local estimate ("Copy" button, when you click on which a new local estimate is created, which is an exact copy of the current estimate with all sections and positions)
On the shape of the tree, the estimate is implemented the possibility of creating corrective local estimates ("Create" button -\u003e "Correction", when you click on which a new local estimate is created, which is an exact copy of the current estimate with all sections and positions). In the new estimate there is a reference to the estimate, the adjustment of which it is
On the form of a local estimate on the Composition tab, for the current line, the corresponding result is displayed in the status bar (by position, section or estimate)

New in version 3.0.1.15

When saving the printed form of the estimate is called default as the name of the estimates

New in version 3.0.1.14

Fixed errors in calculating the base index with indexing at the partition level and the use of the index to the difference in the cost of operation of machines and wages

New in version 3.0.1.13

Setting the order of rounding the phot in the calculation of HP and SP - rounding the amount of components or each component separately

New in version 3.0.1.12

Printing estimation with wood shape
Selection of amendments to dismantle from the list of predefined amendments
Setting the result by estimate to display in a tree of estimates and a local estimate tree
Acceleration of the procedure for opening the collections of an external regulatory framework

New in version 3.0.1.11

Changed the user interface for processing the exchange of estimated data in the ARPS format
The ability to replace resources for a resource from the current price directory of the external regulatory framework
Print form App for Act and Local estimates
Enter and storage of work compositions for reference books Regulatory collections
The ability to subtract a resource with a removal for the position of the estimated document
The ability to enter positions by code
The ability to replace resources for a resource from the current price catalog through group processing of positions
Formation of a statement of volumes in basic units of measurement
Acceleration procedure for updating data from an external regulatory framework

New in version 3.0.1.10

Added Total Configure Server and Slot Protection Port
Fixed a number of errors

New in version 3.0.1.9, 3.0.1.8, 3.0.1.7

Fixed a number of errors

New in version 3.0.1.6, 3.0.1.5

Calculation of the average current price of the estimated document for integration targets with the configuration "1C: ERP Management Construction Organization 2.0"
Fixed a number of errors

New in version 3.0.1.4

Display the results on the chapters of the consolidated estimated calculation in the consolidated estimate
Added predefined amendments to work conditions
Examination of estimated documentation on the correct application of the standards of overhead and estimated profit
Added functional option "Use of accounting of work performed"
The possibility of highlighting the position in color and dismissal in the local estimate tree of only selected positions

see also

1. The release is designed to update from configuration of versions 3.0.1.22. The update procedure and additional information is provided in the 1CV8UPD.htm file;

2. The procedure for updating release and additional information is provided in the readme.txt file;

In the subsystem " Access control", included in the BSP, access to to data at the database table entries level (RLS)carried out using two reference books - " Access group profiles"And" Access groups". Setting up user roles is made through the first directory, while the RLS setting can be carried out through both of the reference book mentioned above - to choose from the database administrator.

I would like to note that in the subsystem, it is possible to distinguish between access to data both in element and the totality of the elements combined together according to any sign. As an example, take a reference book " Individuals", the ability to configure the RLS to which is available in almost all typical configurations, and is made using a special reference book" ". For each element of the reference book" Individuals"There is an opportunity to specify in its details" Group access"The corresponding element from the directory" Individual access groups", After that, for each user (or group of users), it is indicated by the corresponding (im) accessible group of access to it. Persons. FAI. TE. Handbook" Individuals"acts as an access limit object (almost any system object can act as such), and the directory" Individual access groups"As a means (tool) to distinguish between access to the subject.

We now turn to what we assume that we needed to organize the delimitation of access to any configuration object on a specific criterion, but there is no possibility of configuring such a distinction in the program. As an example, for consideration, take a typical configuration " Accounting company 3.0"(BP), which includes the subsystem" Access control", and in which there is no ability to configure RLS by directory" Counterparties". Before making changes to the configuration i would also like to make a reservation - the changes entered depend on the version of the BSP used in the configuration, but the principle remains the same. The article under consideration uses the BSP version 2.2.2.44.

And so, the sequence of our actions in the configurator, the purpose of which is to implement the ability to configure in the RLS configuration by directory " Counterparties"(In our case, it is the subject of access limiting) will be as follows:
1. Filter the Metadata Tree for the Subsystem configuration " Standard subsystems" - "Access control".
2. Through the configuration support configuration (in case of using the support mechanism), enable the ability to change the following configuration objects:
but. Configuration root.
b. Directory " Counterparties".
in. Defined type " Sanniped accessory".
city \u200b\u200bsubscription " ".
D. . General module " ".
3. Add a new directory to configuration " Group access groups".
4. Add to Reference " Conguments"New props" Group of group"Reference type to our new reference book.
5. For the type defined " Sanniped accessory"Incutive Type Include links to reference books" Counterparties"And" Group access groups".
6. To subscribe to the event "UpdateGroupsAllImp "As a source also specify a reference book" Counterparties".
7. Open the general module "Control salary accessible "And insert into three procedures to the code fragments below.
8. From the role " Amendment PartyGroupPlip"Copy the roles (or roles that define access to the directory) RLS templates with names" Cognition"And" Cognition-wicked". Establish your own use of one of the templates for the required right (for example," Reading"), as shown in the screenshot below.
9. Run the configuration in " Enterprises"With the startup parameter" Running replacing informational base"(or cause an export procedure" Update ParametrizationDostup"General module subsystem" Controlled-saving access control").

Pay attention to a rather important point: in the last procedure it is possible to add more more code rows if you plan to restrict access not only to the directory "Counterparties", but also to any other configuration objects associated with this reference book, for example, to distinguish access to documents"Realization of goods and services"By requisition" Counterparty"- In this case, items of access restrictions are the document, and the Directory"Counterparties"It is a criterion for restricting access to the subject using the reference book tool"Group access groups".

The prejudice procedure (viewport) exports of salaries. Entity-salary-salary (voice-to-site); // + Our insertion of the widthport \u003d Point Sports. Add (); Videodostup. Ince \u003d "GroupsTrongs"; // Access View Name (Used Cast for RLS) Viddostospota. Representation \u003d NCM ("RU \u003d" Contractor Groups "); Viddost5.Type tests \u003d Type ("Directory Tower Tractor"); // Criterion for restricting access of the widthport. ThipgroupPreations \u003d Type ("DirectoryAds. Gruppostostipartizers"); // A tool of restriction of access // -nash Insert the end of the Cell-use procedure (IMIDADAUTUP, use) exports of salaries. Entity-saving access (IMAYDADAUTUP, USE); // + Our insertion If the armhidadport \u003d "group of groups" then use \u003d truth; Ended; // -Nasha Insert the endprocessed procedure of the configuration of the enclosure // + "; // -nas insert the end of the following

After the update is completed in the program, you must do the following:
1. Fill out the directory just added to the system. Group access groups".
2. U. Elements of the reference book " Counterparties"Fill in the props requisite" Group access".
3. in the directory " Access group profiles"(or in the directory" Access groups") on the bookmark" Access restrictions"Adjust to configure RLS by group access groups (below on screen - users who are assigned profile" Our new access profile"will work in the directory only with counterparties included in the access group" Wholesale"And" General").
4. It may be necessary to provide in the configuration a mechanism for automatic filling of the requisite " Group access"For new reference elements" Counterparties"(In order to facilitate its administration).

Summary: Use subsystem " Access control"From the composition of BSP makes it possible to manage RLS on any configuration objects, operating at least two standard reference books" Access group profiles"And" Access groups". Expanding the RLS setup capabilities is given with minimal changes to the subsystem. In case the criterion (or subject) restricting access rights has a large volume and is constantly expanding (for example, a reference book" Counterparties"), then it is possible through its additional directory (disarming means) to divide the criterion (or subject) of access to certain areas ( in our case through "Group access groups") Otherwise, as an access delimiter, you can use (and makes sense) the elements of the reference book (for example, in the directory" Organizations"). The indisputable advantage of the use of the subsystem is also the unification of administration of access rights in the information base.

Version 3.0.1

Version 3.0.1 is a new edition of the toolkit "1C: Library of Standard Subsystems", which is designed to develop configurations on the "1C: Enterprise" platform version 8.3.12 and higher. In this case, the configuration property "Compatibility Mode" must be installed in "not use" when developing on version 8.3.12 or in "Version 8.3.12" when developing on older versions.

"1C: Library of Standard Subsystems" (BSP) provides a set of universal functional subsystems, ready sections for user documentation and technology for developing applied solutions on the "1C: Enterprise" platform. With the use of BSP, it becomes possible to quickly develop new configurations with already ready-made basic functionality, as well as the inclusion of ready-made function blocks into existing configurations. Using the BSP in the development of applied solutions on the 1C platform: The company will also achieve greater configuration standardization, which will reduce the time for learning and implementing applied solutions due to their unification of the set of standard subsystems.

The subsystems included in the BSP covers such areas as

Administration of users and access rights;
Administration and maintenance (installation of updates, backup, additional reports and processing, performance evaluation, etc.);
Service subsystems (History of changes in objects, notes and reminders, printing, full-text search, attached files, electronic signature, etc.);
Technological mechanisms and programming interfaces (procedures and functions of general purpose, updating IB version, work in the service model, etc.);
Regulatory and reference information and classifiers (address classifier, banks, currencies, etc.);
Integration with other programs and systems (data exchange, work with email messages, sending SMS, mailing reports, etc.);
Application subsystems and user jobs (Questioning, business processes and tasks, interaction, report options, etc.).

In total, BSP enters more than 60 subsystems. The full composition of the subsystems, their purpose, the procedure for introduction and recommendations on the use are given in the library documentation (http://its.1c.ru/db/bspdoc).

Together with the BSP subsystems offers individual methods for developing applied solutions, which are described in the documentation for the library. With the use of BSP, it is much easier to develop configurations that meet all the requirements "of standards system and configuration methodologies for the" 1C: Enterprise 8 "platform (http://its.1c.ru/db/v8std).

In addition, for administrators and specialists in the implementation of applied solutions, external treatments are supplied, which can be used autonomously without a BSP to solve a number of administrative and "repair" tasks: query console, group change of objects, registration of changes on the exchange plans sites, hiding confidential information, etc.

Transition order from the previous version

Revision 3.0 is provided by registered users of the "1C: Enterprise" system, which has an existing subscription to "information and technological support" (ITS).

Version 3.0.1 is compatible with the version of the platform 8.3.12 with a disconnected compatibility mode. The overall procedure for updating the BSP subsystems used in configurations to this version is given in the documentation (http://its.1c.ru/db/bspdoc). The update features from previous versions are described in the Updatessl.htm file that is included in the delivery kit (in the \\ Extfiles \\ Docs directory). When updating "through" a few versions, you need to work out the partition instructions. Transition from previous versions of the updatessl.htm file. For all previous versions of the library.

To update Versions of BSP in applied solutions, it is recommended to use specialized tools included in the library distribution:

Extfiles \\ primer elementBSP.epf. - External processing to simplify the process of the first introduction of the library into the application configuration. Allows you to select subsystems to implement, taking into account their dependencies from each other and save the settings to compare-combined with the configurator. It also uses it possible to remove excess code fragments subsystems that are not used in the configuration.
Extfiles \\ Developer Tools \\ Transpavers301.epf - External processing for automation of a number of mass operations when translating the configuration to the version 3.0.1 library, which are listed in the Transition from previous versions of the updatessl.htm file. It starts in the information database after updating the library metadata in the application configuration. When working with the configuration storage, processing is recommended to run on copies of the information base and then upload back through comparison-association.
Extfiles \\ Checking ExpositionsBsp.erf. - External report designed to run in the information base after deploying or updating the metadata libraries in the applied configuration. Resets common problems of implementing the library in the configuration, in particular, checks the correctness of filling the composition of the specified types, the presence of the necessary code inserts in the modules.
ExtFiles \\ updateenaene-resistantBesp.epf. - External processing to update the configuration to new correctional libraries library. It allows you to significantly save time with regular (for example, weekly) updates. Correctional libraries differ only to the fourth digit in full version version, for example: 2.4.1.1, 2.4.1.2, 2.4.1.10, etc. It must be run in the information database with the configuration containing the previous library release. Click the Update button to the correctional version, specifying the 1CV8.CF file of the new version of the Library of the Supplies. At the same time, an automatic comparison / combination with a new library configuration is performed according to the settings that match the documentation: all the supplied library objects will be transferred, and overridden during implementation are combined with the provider's configuration priority (for example, specified types) or skipped (such as redefined modules) . After comparing / combined, the database configuration will not be updated automatically, which allows you to compare with the database configuration and make edits to changed objects: overridden modules, various local corrections and refinement. After the update, you must additionally execute instructions from the transition from test versions or transition from previous versions of document Updatessl.htm if they are specified. In addition, as an alternative option, on the shape button, the settings file provides the ability to form settings, which can then be downloaded in the configurator for manual comparison-association. However, when updating to new functional releases (change in the third digit), the flag layouts in the comparison-association window must be performed, as before, in the configurator, following the instructions in Chapter 2 of the documentation.

Version 3.0.1.204

Correction of identified errors.

Version 3.0.1.114

Final version.

The new settlement mechanism of rights in the "Access Control" subsystem is published in a study form: for pre-embedding in the configuration and library.

Using the editorial board of BSP 2.1.2.34 (1C 8.2 platform), I will consider the basic functions, subsystems and examples of using this configuration.

The configuration of the "Library of Standard Subsystems" is one of the few configurations from the company 1C, which is created for developers, and not users. The configuration itself is a set of subsystems that can be used in any configurations. Also, the BSP includes a whole development technology based on 1C 8.2. The library of standard subsystems allows you to standardize solutions and achieve maximum similarity of various solutions from different developers. All type configurations 1C 8.2, where controlled forms are used (2.0, BP 3.0, UT 11, UNF), written on the BSP base.

In the BSP subsystem, as a rule, features such as administrative databases, installation of data rights, attaching files, viewing objects, tasks to employees, email messages, questionnaires, sending SMS, standard background information (organizations, currency classifier,) and other service Functions that can be included in any configuration based on 1C 8.

The configuration of the Library of Standard Subsystems has a special deployment assistant, which allows to significantly reduce labor costs in developing a new configuration. With the help of the assistant, you can step by step to specify the necessary subsystems and get the workpiece for the future configuration:

Below, I will briefly describe the subsystem of this configuration, their purpose, and how can you be used. In total, the "Library of Standard Subsystems" 52 subsystems. Some are interconnected, some independent. To consider the implementation process of each subsystem, it is best to refer to the configuration documentation.

Get 267 video tutorials for 1C for free:

1. Basic functionality

The Basic Functionality subsystem contains a basic functionality, mandatory for all application solutions that use the library. The basic functionality includes procedures and functions of general purpose, the subsystem of the arbitrary header of the program window, a universal form for selecting metadata objects, a number of universal treatments, as well as standard roles: full-hand, administrators, UpgradesFigurance Based, Basic Frame and others. The system contains a functionality to set the session parameters.

This subsystem is mandatory for installation in the case of using any other subsystem.

2. Work in the service model

The "Work in Model" subsystem contains basic functionality, mandatory for all application solutions designed to work in the service model, as well as a number of subsystems that expand other subsystems to work in the service model (for example, "currency in the service model", etc.) .

3. Addressible classifier

The subsystem is designed to download, storing, obtaining address information. Loading comes from (bracing). The subsystem is strongly related to the "Contact Information" subsystem, but it can be implemented autonomously.

4. Analysis of registration log

Contains a special report to more informative viewing of registration log information.

5. Questioning

Designed for surveys and analysis of survey results. It is possible to conduct polls via the Internet by the web client.

6. Banks

The subsystem is designed to download, storing, receiving information about banks. Loading occurs from the RBC site, it is possible to configure the regulatory task and manual loading.

7. Business processes and tasks

Designed to work with tasks as part of the business process. Tasks can be addressed to the performer or group of performers as personally (personal addressing) and using the roles of performers (role-playing addressing). The subsystem includes five functional blocks: configuring role-playing, creating, execution, control and automatic monitoring of tasks.

8. Currency

The subsystem is designed to load, storing, obtaining information on currencies and currency courses. Possible selection of the desired currency from the table document. Downloading currency exchange rates occurs from the RBC website, it is possible to set up a regulatory task and manual loading.

9. Reports

The subsystem is expanding the user interface of the report settings.

10. Versioning of objects

The subsystem is designed to save and further analyze the elements of reference books and documents. The subsystem retains each version of the object in the value repository, after which it places it in the resource of the information register. The subsystem includes special reports that allow you to quickly see the default history of the user with the object.

11. Interactions

The "interaction" subsystem is intended for planning, registration, ordering interactions and work with the results of interactions. Interactions include e-mail corresponding, calls and meetings. The subsystem provides selection and creation of new contacts of interactions.

12.Gruple change of objects

The subsystem allows us to produce a mass change in data in the database. Reminds similar processing from 8.1.

13. Dates of prohibiting change

Allows you to set the date that users are blocked in documents, reference books, etc. It is widely used in typical configurations - with it you can close to edit the objects of the last period.

14. Additional reports and processing

The subsystem "" is an absolute analogue of the old library of standard subsystems, gives to connect external processing and printed forms.

15. Completion of users

The subsystem allows you to complete existing connections with an information base (very useful if the session hung) and set the blocking of new connections with an information base for a certain period of time, for example, for the time of regulatory procedures.

16. User notes

The "User Notes" subsystem is intended for storing personal notes (various unstructured information, which is not available to other information base users). Notes can be marked with color, put on the desktop and combine into groups.

17. Prohibition of editing property details

Allows you to turn off the editing of arbitrary details of the object. This is what lacked so much in 8.1.

18. Protection of personal data

The "Protection of Personal Data" subsystem is intended to meet the information system based on the configuration, the requirements of Federal Law No. 152-FZ dated June 27, 2006 "On Personal Data".

19. Information Center

Essentially connect to the ITS system. Integration of the application with the service solves the task of a quick transition to other subscriber applications and display the name of the application as the subscriber asked it.

20. Information when starting

Displays the page with different information (for example, advertising) when starting the HTML system. Pages are contained in processing layouts. INFORMATIONSPORK. Each layout contains a start page, and may also contain other pages that are listed in the start page.