IPhone is not recognized by the computer what to do. Why doesn't the computer sees an iPhone via USB

We often address readers with various questions about solving any problems associated with mobile devices and software. One of the most popular: " iTunes does not see iPhone, what should I do?".

In contact with

Find on the Internet a working way out of such a situation can be done, but you have to make your way through the mountains of various information. In this article we decided to combine all possible methods solutions and figure out why, nevertheless " iTunes does not see iPhone«.

iTunes often scares users iPhone, iPad and iPod Touch.. The program seems confusing, complex and extremely uncomfortable. So also pearls different throws out. That, the music is synchronized incorrectly, the applications were disappeared somewhere, and then at all iTunes cannot determine the iPhone (iPad or iPod Touch).

Despair (and go to Android) is not worth it, there will always be solutions to the problem. If iTunes does not see the iPhone check the performance:

• Software. Reinstall iTunes by downloading the latest version.
• Cable. Try to use another cable.
• Computer. iTunes does not see the iPhone because of the failure in apple work Mobile Device. Another computer can help get rid of the problem.
• USB ports. Often it is in the USB port that the problem lies. Try using the connector on the back of the system unit.

If all standard methods did not help, then it's time to take a heavy artillery.

Does not see because it does not trust

iPhone or iPad are quite self-sufficient, autonomous devices, but they still have to connect to a computer to transfer large amounts of data, installation of software, etc. In this case, sometimes there is a problem synchronization of devices, which can be solved often described in the methods below.

ON THIS TOPIC:

It will be about trusted computers, or rather, the operating systems installed on them. By first connecting the iPhone or iPad to a new computer (or after reinstalling the OS on the old one), the user gets a request to "trust this computer?" And I must answer it in the affirmative, to access the settings and content on your mobile device.

If you reject the request, the synchronization problem may result in the followingAnd to solve it will be necessary to use the instructions below.

On MAC

So, to get a request and "start trusting" to your own computer MAC.need to choose in command line Menu " Transition —> Go to folder"(Or take advantage of the key combination ⌘cmd. + ⇧shift. + G.«),

and then go to the address / VAR / DB / Lockdown And delete all certificates available in this catalog.

On windows xp, 7, 8, 10

In the case of Windows, Windows will also need to delete the contents of the Lockdown directory. To do this, you will need to turn on the display. hidden folders and files ( Start —> Control Panel —> Folders settings),

and then go to the address C: \\ PROGRAMDATA \\ Apple \\ Lockdown (for Windows 7, 8, 10) or C: \\ Documents and Settings \\ all Users \\ Application Data \\ Apple \\ Lockdown

If the deletion of certificates with Windows PCs did not solve the problem, you will have to use a more complex method:

1 . Right-click on the label click A computer", Choose" Properties"And find" Device Manager«;

2 . In chapter " USB controllers»Right-click Call context menu item " Apple Mobile Device. USB Driver. "And click" Refresh drivers ...«;

4 . In the window that appears, we click Overview"And go to the catalog C: \\ Program Files \\ COMMON FILES \\ Apple \\ Mobile Device Support \\ Driverswhere we are interested in the file with the title " usbaapl", Which is required to install.

If none of the methods described above did not solve the problem, then it is likely that its reason lies not in receiving confidence status for this computer. Try the following:

iTunes does not see the iPhone or other Apple device in Microsoft Windows XP

1 . Close iTunes, having previously disabled your device;
2 . Go to Start -> Perform and enter in the window that appears services.msc. Or open Services In chapter Administration Control panels;
3 . Find Apple Mobile Device. and in the next window click on Stop;
4 . After stopping in the same window, click on Run;
5 . After restarting the iTunes service will be ready to work with your device.

Do you happen to experience irritation due to the fact that it turns out in the dismissal moment - the computer does not see an iPhone via USB? Today you will learn about the reasons of the phenomenon and ways to eliminate them.

We solve ourselves

Situation 1. PC does not define a new device, and there is no connection notification on the iPhone screen.

Decision. Disconnect the smartphone cable from the USB port and insert another media there. Successful reading of information and identification of a flash drive computer indicates problems in the cord itself or a nest in the iPhone. Contact the workshop for diagnosing, repairing or replacing the connecting cable. If the information is not read by nowhere, the port of the computer is inoperable.

A similar problem occurs in the case of using third-party cables. Missing standards, lack of drivers, small defects - the main reasons for the invisibility of the gadget computer.

Situation 2. The situation 1 exacerbates management difficulties.

Decision. Dust particles can disrupt the operation of the connection. Some users are negligent to their favorite gadgets. Garbage from pants, trousers or bags penetrates through the USB cable connector inside, paralyzing the reliable operation of the device. Add problems and aggressive particles capable of oxidizing them. The situation will fix the general cleaning of the body of the beloved gadget.

Situation 3. The computer sees the device, but does not sees the contents of the memory.

Decision. Reformatting iPhone, replacement operating system On PC or using an emulator.

Apple devices are sharpened to work with the Makintosh operating system. By default, the gadget memory modules are formatted in file System HFS. This system is not recognized by Windows installed on most computers. The problem is eliminated in such ways:

• Reformatting a gadget. Minus this option - guaranteed loss important information - Music, photos and contacts.
• Replacing the operating system on the computer. The step is quite risky - the installation error can harm the computer up to the impossibility of running as Windows, so Mac OS Leopard.
• Using an emulator. Rational solution for unsure users. The Mac OS medium emulator will allow access to the Gadget data without serious consequences.

Situation 4. iPhone is connected, the appropriate notification is displayed, but the device is not visible in iTunes.

Decision. Make backup MediaBibelets and reinstall the program. Try in turn to set the latest version and old. A failure will be eliminated and the smartphone will be determined.

Without a wizard, do not climb!

Considered the above situation can be resolved independently. Next on the agenda of the situation requiring the intervention of professionals.

Situation 5. The computer does not see the iPhone in the stop. It seems everything works, but the contacts are wet.

Decision. Start using the device as soon as possible and take into authorized service center. The problem is caused by moisture getting inside the apparatus. It is not sufficient to dry it yourself, it is necessary to test the performance of the life nodes of the smartphone. A qualified specialist will fulfill this procedure in a short period of time.

Situation 6. Updated the firmware. Before replacing everything worked, now the computer does not recognize USB.

Decision. It will help the change of firmware in the service center. The reason for the phenomenon - malfunctions, especially if the update was conducted in networks with unstable Internet. At the time of the cliff, fragments could be transmitted, which are responsible for the operation of the connectors. As a result, the computer is deprived of important information that helps him identify the gadget.

Situation 7. iPhone fell. The housing is a whole, everything works, but it does not see it in the emphasis.

Decision. Replacing the power loop. The blow provokes violation of the contacts and damage to the power loop, which goes to the USB connector.

Situation 8. Unported photos from iPhone. The computer does not recognize the device as a camera.

Decision. Use of alternative means. For example, enter your account in cloud Service Apple icloud.. Open your gadget virtual interface and download photos on the PC.

Check if the computer has a trusted status. To do this, after unlock the device and confirm the confidence in the gadget screen. The computer will receive access to the iPhone settings management.

You can also use the built-in image management. On macs, this option is indicated by "capture of photos", and in windows Environment - "Import photos" in the menu of portable devices.

The problems described above will not go through a large hole in the family budget. However, they can be avoided, carefully belonging to their gadget. To do this, it is enough to perform 3 simple rules: put in pocket only in a special case, use original cables to connect and keep it away from dirt sources.

In this article, we will deal with why the computer does not see an iPhone of the 4th, 5th model or any other. This phone is known to each person. Many can not afford him, but it does not cancel a great desire to acquire a smartphone.

Currently, the device from the American "Apple" is widely known in the territory Russian Federation, and even, despite the fact that it is much more expensive than the products of competitors, is in great demand. After all, in our time there is an iPhone - prestigious and solid. But, unfortunately, problems also arise with this device.

The main reasons why the computer does not see iPhone

Many are faced with the fact that they connect the smartphone to the computer, but it does not respond in response. Before looking for the reasons for your smartphone / computer / software, you must check the cable for cracks or cuts. This question is especially relevant for those who have animals inhabit. In the event that everything is fine, you must try to insert the cable to another USB port. Sometimes it happens that the problem is concrete in the equipment.

In addition, you should check the smartphone connector. If his contacts were oxidized, then you need to use an eraser, which can easily clean them.

Communicator problems

If after the examination it was found that everything is in order with the port, cable and connector, then, most likely, the breakdown is available in the smartphone itself. Most often, the "apples" arise problems with the lower loop. Especially if the phone has already fallen at least once. When this situation is the cause, it is necessary to replace the item. For iPhone 5, it will cost 1 thousand rubles.

Some owners change the train alone. If the person does not possess the necessary skills and knowledge, then he should abandon this venture. There is a huge chance that the owner after such a procedure simply does not collect the smartphone back, and, most likely, a few more details will come out.

Moisture hit

Often, the described problem is manifested when moisture falls into the device. It is not necessary to lower the phone to the water or swim with it. Problems can begin even if the device broke through the cheese and wet room for some time.

If the problem is in this, you should immediately contact the service center. Some are capable of independently disassemble the device and dry it. However, it is necessary to have special skills.

Possible solutions

If the problem is with the cable, it is enough just to replace it with the verified. You can buy this in any service store. But in the event that the problem lies in the internal device, then you should contact the specialists. Of course, if you have an impressive experience, you can replace the details and independently, but the manufacturer does not recommend this.

Official Application Problems

Very often there is a problem at which 5 in official applications. Most often this problem occurs with iTunes. To begin with, the provision must be reinstalled and take care to be downloaded latest version utilities. If this method does not help, then you need to tinker with the settings of the operating system itself:

• In the case when Windows XP installed on the computer, it is necessary to close the problem support and turn off the smartphone itself.
• Next, go to the Start menu and enter the following command: Services.msc.
• In the opened menu, you should find the item that is responsible for the operation of the Apple device.
• In the properties window, you need to "stop" its work and immediately "run" again.
• After the transduction process is completed, you need to try to connect your phone.

In the event that the technique is running Windows 7 / Vista, and the question of why the computer does not see an iPhone, quite relevant, it recommends performing the following actions:

• You need to go to the "Device Manager", find a point there that is responsible for the functionality of the functionality with the "apple" and update its driver.
• The latter should be sought in the computer.
• To do this, on the "C" disk, you should find the program files folder, hereinafter - "General" and "Apple".
• The "Mobile Device Support" will be the driver directory. We are interested in the USBAAPL file.
• It remains to wait only its installation.
• Next, you need to connect the device to the computer again.

If the problem arose with a device that works with Mac OS X:

RESULTS

The article describes the most frequent causes of the problem why the computer does not see an iPhone, as well as their solutions. Only with small steps can easily eliminate all problems. It should be understood that if the proposed methods did not help, you should contact the service center for a more careful inspection of your device.

Stylish, fashionable, comfortable ... About iPhone You can continue to write enthusiastic ODDs and praise its creators. But what to do when the computer does not see the iPhone? Many of his owners find it difficult to answer this question. What time came to list some possible reasons and ways of their independent elimination.

1. To begin with, the smartphone must be connected to a computer using a USB cable. If the PC does not define a new device, and on iPhone screen A notification of connection is not displayed - it is worth looking for a problem in the cord itself. The use of non-original cords can cause "blindness" of the computer with respect to the iPhone. Make sure the USB port performance: to check insert the flash drive into it. Carefully inspect the smartphone and PC connectors, perhaps they were not used for a long time, and they oxidized.

2. Most. iPhone owners They do not particularly care about their "ward" and drag it in the pocket of jeans or in a handbag, where the full-fastened garbage. Over time, small particles clog all available recesses and holes, thereby delivering a lot of trouble. Carefully inspect the phone connector, and better - immediately take a thin brush and spend the general cleaning of the entire case of your iPhone.

3. Maybe such that has failed in program iTunes.And so the smartphone has ceased to be determined by the computer. You can try to completely remove the software and put the more recent version, or vice versa, put previous version, do not forget to make backup ITunes Media folders, otherwise you can lose your settings and music.

Problems requiring help

1. Moisture getting into the iPhone can be not only the cause of the impossibility to connect to the computer, but also provoke more serious problems caused by microcamints in the device. In this case, it is necessary to immediately turn off the smartphone (preferably immediately after moisture ingress) and you need to put your iPhone as first aid, it absorbs moisture well ("creates" it from your device). But in the future we recommend that you contact the center.

2. The firmware glitch can be unimaginable to affect the work mobile device. If you consider that your computer does not see the iPhone, it is better to attribute it to a service center, where you will be returned to the previous settings by making a rollback. Or you can use one of the iPhone flashing instructions.

Want to know how to earn a monthly from 50 thousand on the Internet?
Look at my video interview with Igor Christening
=>>

Modern mobile apple gadgets perform a variety of features, besides normal phone, this is another camera, camcorder, TV, player, game console, electronic book.

For full operation with these applications, a periodic connection of the mobile phone is required to a computer through USB port. Another way is not possible to download a new game, melody, book, and so on.

Yes, and besides, you need to throw up on the computer's disk. Fresh photos, videos. What if the computer does not see an iPhone via USB port?

What steps do if you connected to a computer, for all the rules - and nothing? The computer does not find your phone, as if you are not connected.

Let's calmly look at the causes, finding ways to eliminate this problem.

Visual inspection

The first thing to check is the integrity of the cord. Inspect it for damage, chances, so on.

With a spare cord, change it. Also try to insert the cord in another USB port.

If you have a laptop, a tablet, connect the phone to them, in order to quickly determine what is the problem, in a computer or telephone.

If the iPhone can be seen on the tablet or laptop, it means the problem in a computer, more precisely in outdated drivers on the computer (this will be information below).

School eraser wipe the contacts on the cord, removing, thus pollution, oxidation. Shake all the remnants, crumbs of the elasty, from the contacts.

What to do if the computer does not see an iPhone via USB, reboot

The next step is to restart both your devices, sometimes this is enough to eliminate the problem.

To work with an iPhone through a computer, ITYUNS program needs. Full possible failure of the program. If all of the above methods did not remove the problem, try reinstalling this program.

Remove the uninstallator installed programdownload new version Programs from the official site - http://www.apple.com/en/itunes/download/.

After reinstalling, connect the device anew.

Manual Driver Update

If it does not help, it is possible that this problem is in the driver installed on the computer. Try to reinstall it.

First of all, disconnect the "apple" from the computer.

Remove the installed driver by clicking on it right mouse button.

Connect iPhone, computer yourself, in automatic mode. new DriverWhat can you see the appropriate message.

On the iPhone you will have permission to access files. Give such permission.

Open the "Explorer", "This computer", if you can see the M3S device, but the files are not visible - unlock the fingerprint device, files will appear.

Automatic Driver Update

Also does not prevent the driver on the chipsets responsible for connecting devices to the computer.

When you run the utility, remove all the extra daws.

Download it, and run, she scans all installed Drivers, It will reveal outdated, will replace them and update.

Technical difficulites

These are all problems that you can eliminate on your own. If all actions have been done, and the problem remains, it can be assumed that the problem is:

• Failure in the iphone chip;
• Damaged by an apple deviation connector;
• Incorrect firmware;

In these cases, you will have to contact the service center, as this is a job for specialists. Attempts to correct them can independently lead to deplorable situations.

What to do if the computer does not see an iPhone via USB, outcome

I hope I managed to answer the question: what to do if the computer does not see an iPhone via USB port? As you can see, most of the reasons why the computer does not see an iPhone via USB port are fixed on their own, easy enough.

To correct the problem, you will not need special knowledge of electronic technology.

P.S. I apply screenshots of my earnings in partner programs. And I remind you that everyone can, even newcomer! The main thing is to do it right, and therefore learn from those who already earn, that is, professionals.

Do you want to find out what mistakes make newcomers?


99% of newcomers make these mistakes and suffer fiasco in business and earnings on the Internet! Look at not to repeat these errors - "3 + 1 Novice errors who kill the result".

Are you urgently needed money?


Download free: " Top - 5 ways to make money online" five best ways Earning on the Internet, which is guaranteed to bring you the result from 1 000 rubles per day and more.

Here is a ready-made solution for your business!


And for those who are used to take ready-made solutions, there are "Project of ready-made solutions for starting in the Internet". Find out how to start your business on the Internet, even the most "green" newcomer, without technical knowledge, and even without an expense.