Increase the RAM on your computer. Replacing RAM in the laptop

Perform the upgrade of RAM (RAM) on the HP laptop to increase system performance. If you need to upgrade RAM, it is necessary to determine the type of memory installed in the computer, the maximum memory capacity supported by the computer, and the memory capacity supported by the operating system.

Search for a product code corresponding to HP laptop

Before ordering a new memory module, you must define the corresponding notebook product code for searching documents and technical characteristics For your model. Usually, this code is indicated on the sticker located on the bottom of the laptop, or on the box in which it comes. See how to find a model number or product code? For information on additional features.

Note.

The general name of the product family specified next to the keyboard or on the frame around the screen does not allow sufficient information to order spare components.

Search for the specifications of the installed memory (capacity, type, maximum supported capacity)

See the technical characteristics of a laptop or manual for care and maintenance to get information about installed memory. Go to HP Product Support Support Services Website for your computer model, then select Category Product Informationto go to the document with technical specifications, or select User's manual To view the care and maintenance manual. Or enter the product code in the "Search" field in the top area of \u200b\u200bthis page, insert the space and enter the words specifications or (example: RQ877AS Specifications).

In the care and maintenance manual See section Memory For information on the technical characteristics of the memory module, spare parts numbers for memory module, compatible processors and types of RAM, as well as the number of connectors for memory modules.

In the document with the technical characteristics of the laptop See section Memory For the following information.

Capacity of the installed memory: Check the current memory capacity installed on the computer, then go to the section in this document.

Maximum Supported Memory Capacity: To determine how much memory needs to be purchased, deduct the value of the capacitance of the installed memory from the value of the maximum supported container. You can also purchase memory with the maximum allowable container and replace the installed memory. Then go to the section Determining the maximum memory capacity supported by the Windows version In this document. Use the smallest of these two numeric values \u200b\u200bas the maximum memory capacity.

Memory type (including speed): For each HP connector, it is recommended to acquire the memory modules of the same type (with the same capacity, speed, as well as one manufacturer). For best performance, it is recommended to use memory modules with maximum value The speed supported by the motherboard.

Attention!

Some motherboards do not support configuration of memory modules of various manufacturers, or memory modules with different CAS values \u200b\u200bor density. To ensure memory compatibility, you should use SO-DIMM modules with the same part numbers.

Determining the location of the memory installation in the laptop

The compartment for memory modules is located at the bottom of most HP and COMPAQ laptops. On some models of laptops, the compartment for memory modules is under the keyboard. In this case, HP recommends contacting an authorized HP service center to receive assistance on request and replacing RAM.

Check out the section Extraction and replacement in manual for care and maintenance for computer to get detailed instructions By defining the location of the compartment for memory modules. Care and maintenance guide available in category Product Information on the main page HP Product Support Services Website for your computer model. Or enter the product code in the "Search" field in the top area of \u200b\u200bthis page, insert the space and enter the words maintenance and maintenance manual (example: RQ877As care guide and maintenance).

Determination of the capacity of the memory

Check the capacitance of the installed memory to determine the capacity of the memory added on the on or off of the computer.

Check the capacity of the memory on the computer enabled

To test the memory capacity on the computer enabled, use the HP Support Assistant application.

Check the capacity of the memory on the off computer

To check the memory capacity on the computer turned off, open the compartment for memory modules.

Determining the maximum memory capacity supported by the Windows version

Determine the memory capacity supported by the version of Windows, which is installed on your HP laptop.

• Maximum memory capacity for Windows 10 versions

  Minimum memory requirements in Windows 10 - 1 GB of RAM (32-bit) or 2 GB of RAM (64-bit).

  Maximum memory capacity for versions of Windows 8

  Minimum memory requirements in Windows 8 - 1 GB of RAM (32-bit) or 2 GB of RAM (64-bit).

  Version Windows 8.	Maximum memory capacity for 32-bit versions (x86)	Maximum memory capacity for 64-bit versions (x64)
  Windows 8 corporate
  In Windows 8 Professional

• Maximum memory capacity for Windows 7 versions

  Minimum memory requirements in Windows 7 - 1 GB of RAM (32-bit) or 2 GB of RAM (64-bit). The maximum memory capacity depends on which version of Windows is set:

  Version Windows 7.	Maximum amount of addressable memory
  Starter (32-bit or 64-bit)
  Any 32-bit windows version 7 (except for the release of Starter)	4 GB (for use is about 3.3 GB)
  Home Basic, 64-bit
  Home Premium, 64-bit
  Enterprise, 64-bit
  BUSINESS, 64-bit
  Ultimate, 64-bit

Installing a new memory module

On most HP and COMPAQ laptops new module Memory is installed through the compartment for memory modules at the bottom of the computer. Check out the following instructions to make sure that they are suitable for your computer. To find instructions for your computer model, see the user manual or enter the computer model number and the phrase memory replacement in the search field in the top area of \u200b\u200bthis page (for example: replacing RQ877AS memory).

Note.

If you are not sure that you can install yourself, contact an authorized HP service center for help. If the person or service, not authorized HP, perform the upgrade of RAM, the product warranty does not apply to any possible damage. The user assumes all risks and responsibility for damage related to the upgrade of memory.

Troubleshooting after installing new memory

If, after adding a memory, the computer does not start or Windows does not open, the audio signals are played or the indicators located next to the keys are blinking. Caps Lock. or Num Lock Try following:

• Remove and re-install the new memory module.

  Remove the new memory module and clean the groove in the connector into which it is installed. Purify with compressed air through a thin nozzle using safety glasses to remove dust or debris.

  Remove the new memory module and try to start the computer. If the computer starts, check the correctness of the type and the compatibility of the capacity of the acquired memory module. For getting for more information On the selection of suitable memory for purchase, see Sections Search for the specifications of the installed memory and Determination of the capacity of the memory In this document. Use the source memory module for reference.

  If possible, use the memory modules of the same manufacturer and with the same product code.

  If after that the restart of the computer is still not executed, remove the replaceable memory modules, set the source memory modules and check the ability to use the computer in the same configuration.

Check the types of memory modules and computers for HP computers

Check out information about memory modules and requirements for using HP computers.

SO-DIMM memory modules and requirements

IN laptops Small memory modules are used with a two-row conclusions (SO-DIMM). They are less and thinner than other DIMM modules, so used when there are restrictions on the place in the chassis. SO-DIMM modules for the HP computer must comply with the following requirements.

The number of contacts on the SO-DIMM module must match the connector type.

To install SO-DIMM modules, a 200-pin connector is required.

DDR2 SO-DIMM is incompatible with DDR1 DIMM and DDR2 DIMM memory modules.

DDR3 SO-DIMM is incompatible with DDR1 or DDR2 modules, and 204-pin connector is required to install them.

If the computer is used in the computer 533 MHz or 667 MHz bus, use the PC2-4200 memory (DDR2 DIMM 533 module).

DIMM memory modules and requirements

Memory modules with a two-row conclusions (DIMM) are small printed circuit boardswhere groups of memory chips are placed. They are used on most desktop computers. The DIMM modules have a wider connection path with two rows of contacts on each side, which provides a faster data transfer compared to modules with a single-row memory microcircuit (SIMM). DIMM modules can be released in one-sided or bilateral execution. DIMM modules can not be added pairwise and can be used with other DIMM modules with identical contact numbers. For example, a DIMM module with a capacity of 1 GB can be installed on a motherboard next to a 2 GB DIMM module.

Note.

The speed of the DIMM modules cannot be higher than the system tire frequency. If several DIMM modules are installed with different operating frequencies, the operating frequency of the entire memory set will be equal to the DIMM modulus operating frequency at the lowest speed.

DIMM Modules for HP Computer must comply with the following requirements.

The number of contacts on the DIMM module must match the connector type.

For memory DDR. 184-pin connector and operating voltage 2.5 V.

Memory DDR2. incompatible with DDR1 memory, and it requires a 240-pin connector, as well as the operating voltage of 1.8 V.

Memory DDR3 Provides bandwidth, roughly in excess of the bandwidth of DDR2.

Modules DDR3 incompatible with DDR1 or DDR2 memory.

To install modules DDR3 DIMM requires a 240-pin connector and an operating voltage of 1.5 V. The DDR3 memory connector is other than for DDR2 or DAR. Do not attempt to install the DDR3 memory module on the motherboard designed for DAR or DDR2. Otherwise, irreversible damage to the motherboard and DIMM modules is possible.

SCRAM (synchronous dynamic memory with arbitrary access): Use the DAR type SCRAM memory only if the computer comes with DDR-SDRAM modules.

RIMM memory modules and requirements

DDR3 memory supports 3 DIMM modules in three-channel mode. The same size and type of memory must be installed in the corresponding DIMM connectors for channels A, B and C. As a rule, memory slots have a color coloring to simplify the understanding of their destination.

Acquisition of memory for upgrading

HP recommends purchasing memory modules directly in HP outlets, from authorized HP dealers or reliable computer component suppliers such as CRUCIAL .

Many suppliers of computer components that are HP partners can help in choosing a suitable memory for your computer model. Before purchasing memory modules, you need to know how much memory is needed, and which type it is compatible with your computer.

Hello everyone ! In today's article, tell me how to install rAM. Those who decided to add RAM into the computer probably already already chosen the RAM. Nevertheless, we advise you to familiarize yourself with another publication from which you will learn.

By reference above, you will find out that the RAM is different and how many RAM can be delivered, and also that everything can be not so trivial in the RAM installation for laptops. In addition, this article is useful if you want to establish additional RAM.

How to set RAM into a regular computer

So, you have already bought and keep the desired module in your hands. Generation this module RAM is suitable for your motherboard. Also, do not forget that the scope of the RAM should be such that the module or RAM modules can be supported by your motherboard.

In other words, before installing, make sure that your computer not only supports the existing volume of memory modules, but also this particular generation, since the RAM is different: DDR., DDR2., DDR3, Edo, Microdimm, SDRAM and Sodimm.. This is especially true when you need to deliver additional RAM. When installing or replacing RAM, some "experts" argue that the user may encounter the following problems:

1. With electrostatic charges.
2. Incorrect parameters in the BIOS.
3. Incorrect installation DIMM modules.

On this basis, you can meet stupid tips about adding RAM:

• To prevent the accumulation of electrostatic electricity when working with sensitive chips, you should not wear clothes from synthetics or shoes with leather soles (or stand on a rubber rug).
• Remove the accumulated electrostatic charge by holding the housing system Block.
• You can also use a special grounding bracelet on the wrist, which can be purchased at the electronics store.

You are just thinking about this nonsense! Foil hat do not wear? Know that these problems are sucked from the finger people far from reality. Of course, there are problems with the static and grounding of the computer case, but they rarely happen and to install RAM are practically no relationship.

True, it is worth noting here that if you want to install additional RAM, then the question of the incompatibility of the modules may be. But it is an indirect attitude to the installation process itself.

The main thing before installing to de-energize the computer and give it to stand for five minutes. Usually, the installation of the RAM of the correct form factor takes five minutes. To replace the memory RAM in standard PCs, it should be relying on the following tips:

1. Turn off the PC and disconnect network cable. Wait for a while until the balance disappears on the board.
2. Open the system unit. Usually the lid is holding on two or less than four screws.
3. Gently move the cables that can prevent free access to memory connectors. Before disconnecting the wire, remember where it was connected, but it is better not to disconnect anything - in most cases it is possible to install RAM unhindered.
4. If you need to extract the module to put the RAST memory or frequency, then it is enough to make the side of the side locks that keep the module.
5. Most modern motherboards support two-channel operational memory mode. His plus is that memory modules work, cooperating with each other. You need to determine which connectors you should use to work correctly in two-channel mode. Such connectors have different color (pairwise). That is, when installing two identical memory modules, they should be put in connectors of the same color.

Special keys are present on RIMM and DIMM strips, with which the correct orientation of the plank occurs in the appropriate connector. That is, any form factor or generation of memory has its own key to which you need to install the RAM bar. Before inserting the module you need to make sure that plastic latches located on the sides are divorced to the sides:

After installing RAM into the motherboard slot, it is enough to gently press the module and the latches themselves will be in place.

If the interfering wires are disabled before installation - return them to place and close the system unit cover by connecting the power cord. After installing additional RAM it may be necessary to start the application. bIOS settings To save new parameters, but usually the computer understands everything itself and simply starts the staff loading of the operating system. Overwhelming majority modern Systems automatically determine new Size Memory and make the necessary changes in the BIOS.

How to add RAM in the laptop

So we got to laptops. Installing RAM in the laptop is almost a lottery, because you first need to find out whether the installation is possible in a specific laptop model. At the beginning of the article, we have already given a reference to the publication ,. Therefore, they will not sharpen attention on this.

The first thing to find out before adding the RAM into the laptop is whether the laptop has an additional slot, whether it is busy. This does not concern that case when you want to replace the RAM. Laptops are all different, so the additional memory slot may be absent or located in a difficult place. For example, in this:

Or such:

Therefore, for many models, adding RAM into a laptop can be a problem. But more often, it is enough just to unscrew the lid on the bottom of the laptop:

Remove the memory module by freeing from special fasteners, if necessary, replace:

And install a new Sodimm RAM into place:

After adding RAM, you can use special utility Diagnostics and make sure that memory functions correctly, but it is better to simply go to the properties of the system and look at the amount of RAM used. We hope our article turned out to be useful and you managed to correctly put the RAM. Read!

• Elena

• ildar

  Hello, tell me, please, in Eversha written 2 channels of memory devices, does it indicate that in the laptop 2 of the memory slot? Lenovo laptop, the lid removed, but the slot is like alone.

• Ruslan

• Gennady

  Hello.
  Help me please.
  Computer (block) 6 years.
  Windows XP.
  The last 2 m-Mosen began to slow down the cache cleaned, defragmented both disk and C and D.
  CB C. Capacity 97.6 GB
  Busy 40.2 GB
  Free 57.4 GB

  Disc d Capacity 135 GB
  Employed 28.6 GB
  Free 106 GB

  I especially began to slow down when watching movies.

  Kaspersky.

  Absolutely everything is licensed.

• Andrew

  Hello!
  I have such a problem: a month ago I began to "bug" the computer-turning on 5 seconds works and turns off after it turns on it (the screen does not burn the Tobish staff no)
  I was told to the repair center that I flew the memory module (burned), I had 2 memory modules and both 1GB class-DIMM DDR2 and both on Hynix chips, one memory module remained (everything worked, but only with 1GB brakes. XD. After I bought a memory module on 4GB class-DIMM DDR3, too, on a chip from Hynix.
  The problem is that how I wrote above, my problem with turning on and off was repeated with a new memory module. Removing a new memory module remains DDR2. Everything works as it was before.
  What is the problem?

• Kudesnik.

• Nikitos

• Vladimir

  Hello. Do I add to the memory of Team Group TXD34096M1600HC7DC-L (2x2GB) New Kingston KHX1600C9D3B1K2 / 8GX (2x4GB) PC Maternal gigabyte board GA-H55M-USB3 Cori5 750 windows7 64bit. Will PCs 12GB of RAM searched. Thanks

• Vladimir

  Hello. Please tell me why the Aida64 does not correctly show the location of the memory schedules. Factically (I see on the motherboard) one. And Aida 64 on the contrary. Why? Please answer. I am puzzled ...

• Vladimir

• Immanzhan

  Here I have such a problem, my house was lying
  2-GB RAM, I installed it on a computer after a reboot blue screen death with some kind of inscription. What should be done ?? Help?

• fireSystems.

  Good day! In the computer stood 4 4 GB strips. One of them plugged (issues a blue screen of death). Question: How appropriate to use 12 Gb (asymmetrically), or better 2x4 to each channel (symmetrically).

• Alex.

  Hello! Faced with such a problem! I want to add online memory to laptop! Lenovo B570E laptop (59-355318) in online stores in the description is written that slots for RAM 2 But when I unscrew the back cover there is one slot . Could it be a slot of the RAM is located in some place a laptop. Thank you!

• zaire

  healthy, I have such a problem with my laptop stuffing, I decided to ultimate additional operations, but it does not help worth 2 GB RAM Naturally, it seems to me the installed additional operationer does not work on a complete, proactively when viewing the properties of the system shows me that installed 4 GB memory 2GB, really do not sit long loaded help please

• Dima

  Hello, I have such a problem, it's worth 2GB operatives, but they are different, but inserted as it should be, and when I turn on the video on YouTube processor loaded by 100%, and the video slows down, although the video card is good worth it, can there be a problem in RAM?

• Bogdan

  Hello!

  Jednie acquired a laptop asus k750j, a rather powerful car, but when I'm trying to play in computer games, I throw a mistake, and writes that there is not enough RAM to work. This is extremely strange, since as on my last laptop there was the same number of RAM (6GB) and the problems did not arise. Maybe games simply do not see my rapid memory? I would like to know how to solve this problem. And one more question, if the ability to transfer RAM with an old laptop (HP Pavilion DV6) to the new (ASUS K750J)?
  Thanks in advance for the answers

• Dmitry 2014.

  Hello! Help please, such a problem is the RAM on a computer 2 GB, I decided to establish additional memory for 4 GB, did everything as it should be but the computer does not boot! The boot screen appears and it hangs on it! Windows 7 32-bit!

• warmongerrr.

  Hello! Tell me pliz me M2N68-AM SE2 aMD processor Athlon II X2 240 Does these straps DIMM DDRII 4096 MB PC-6400 (800MHz) SDRAM CORSAIR 2X2GB 5-5-5-18 TWIN2X4096-6400C5C in advance Thanks!

• Bogat.

  hello, please help me GA-8IPE1000MK motherboard with Pentium 4 processor I want to stick there AMD Athlon. 64 3000 Is it possible ??? And another such question I have 4 slots for RAM in 2 and 3 slot costs 2 strips of 256 DDR I want to add another 2 to 512 too DDR but when started requests safe mode Or we usually tried both options after the choice further does not ship what to do, tell me ???

• FDS_256BIT.

  High. I bought myself 4GB RAM, the frequency of 1600 MHz. In M.Plat, also 4GB 1600 MHz. Including the computer, checking verification, I see, it is written that I have installed 8GB, free 3,47 GB. Kak so? I went to Aida64, it's written there what physical memory Free 3,47 GB, and virtual 6200 MB. Why is it possible? After all, I have 8GB RAM. Please help.

• Hucciboss.

  Hello, I do not really understand the computers and I have such a problem. I decided to add RAM (costs 512), bought the bar identical to the one that stands in the computer. At first I decided to replace it at all, took out the old one, put a new one, turned on the computer (immediately after installation) the black screen and the scoop came up when the computer was turned on.
  I decided to put with the old bar, just turned on immediately after installation the screen earned, but then the "Welcome" the download of the computer did not go.
  After all this again put the old bar all works, but computer He began to brake terribly. What do you advise?

• tima010.

• Valera

  Hello, please tell me the old computer with the processor Intel (R) Pentium (R) CPU 3.00GHz whether it can pull 8 GB operatives if the old RAM will be resistant to 1 GB ??

• TTT007

• Oleg

  Hello, I have a current problem; In the motherboard there are 2 channels of RAM for 1GB DD2. It is there such a macaram black slot 1, yellow 0, black slot1, yellow 0. I add 2 chips to 1GB in a yellow slot, I pop out a blue screen of death. What to do? Clean the same chips similar to each other.

• Max

  hello. Replaced the DDR3 2 Gig RAM on 2 RAM DDR2 with 1 gigar memory for the sake of interest. Love your DDR3 starts but blue screen Death What do I need to do? ((
  Thank you for early.

• Valera

• KSENIA

  Good evening)) I have such a question, I have a mother ASUS P5B SE RAM worth DDR2 Can I install DDR3? I heard that there are such motherboards that go and 2 and 3 but do not tell me in advance of the ATP)))

• Pavel

  Hello, on a laptop was 4 GB of RAM, installed another 4. In general, 8, the system and the task dispatcher sees all 8, but when I play only 4 GB, although the FPS is small. The remaining 4 gigs remain empty. Windows 7 Home basic 64-bit. What is the problem?

• Nikolai

  Good day! Tell me, please, I have 4 slots for the RAM, on the first and third slot on the gig, the seven system, the system of 2006, does it make sense to add two more RAM on 512 to the second and fourth slots? It will not conflict the computer, and will be seen? Is it this extra gig? In general, how to distribute the RAM (Copper DDR2)?

• Said

  i wanted to change RAM, bought new same as old (DDR2), but after changing RAM, an infinite signal sounds, everything inserted it right, but it doesn't work and noticed one thing: the old RAMs were two when they removed one too, it works Only with two straps, help, if you know!

• Subject

  Hello! I have a question of the following character: - I installed 2 GB 2 slats in my computer, when I check in the characteristics, it writes in brackets (4 GB is installed), outside brackets are available 3 GB, what does the ethio mean? And is it possible to do something about it?

• Talsmir.

  Hello I want to add RAM, at the moment there is Kingston Hyperx KHX1866C9D3 / 2GX 2 pieces of 2GB. I want to add DDR3 DIMM 2GB PC10600 1333MHZ CL9 Kingston (KVR13N9S6 / 2) Help learn whether they are compatible if there is no better to add.

• Nikolai

  I have such a problem. The computer braked hard and buggy and I decided to buy more RAM to such problems I did not have. I put everything as it should, but the laptop could not even turn on. Put the old RAM back and earned again. What's wrong? Model Mat Boards Gigabye GA-Z68MA-D2H-B3
  New RAM Kingston HX318C10FBK2 / 8

• Danil

  Hello. I have 2 GB of DDR3 RAM. In total, I have two slots of RAM and I decided to put another DDR3 bar3 on 4 GB. If this plank stands with the old 2 GB bar, then the computer sees only 2 GB. If you remove 2GB bar and leave the bar on 4GB, then the computer is simply not turned on, does not even pick up, although all the coolers are spinning. The AIDA64 program shows that I have both of these planks in the computer and that they both work !! I do not know what's the problem. Mat board ASUS P5G41T-M LX3. BIOS updated.

• Anonymous

  I took out the RAM bar from the computer for the test, after I installed it, the computer did not start. Yes, I tried to insert another bar of the RAM, it didn't start it. I didn't damage the slot. The question: how could I damage the RAM slot?

• ahmham.

  hello! Which processor is better (Intal 84 Pentium 4 531 SL9GB Philippines 3/00 GHz / 1M / 800 / 04A 7635B077)? Or (INTE (R) Core (TM) 2 DUO CPU E4500 2.20GHz / 2/5 GHz) &?

• Saimax

  Hello. I had 2 planks for 2GB. And I bought 4GB and installed instead of one of the planks. And in the properties of the system they write 6GB, but as before it was written in brackets available 3.25. I have seed x64. Foxconn G31MV motherboard. You can suggest why the amount did not remember answered memoryAfter all, the general number of memory was seen ???

• Oleg

• Anton

  good evening
  Lenovo Z570 laptop
  There was an operational board at 4GB, added another one in the slot over the first 2 GB. It is from the laptop of the same (Z570) only weaker than video and RAM.
  The "System" tab displays that the memory is 6GB, and only 2.92GB is available.
  What to believe?

• Anton

• Konstantin

  I can not find the second laptop memory slot Futjitsu Siemens AMILO 3540-one found, it is worthwhile in it to 1GB, it is above the video chip, but where is the second-reloss. Software and Aida show two slots of 1 GB.

• nikolai

  good day. Tell me in my computer installed 2 strips of 2 GB (MSI H55ME23 motherboard), the motherboard supports 8GB of RAM. Protective Kingston DDR3 8GB PC-10600 (KVR1333D3N9 / 8G) with it the computer turns on and after the starting screen reboots it. Imit it to Kingston DDR3 8GB (2x4GB) 1333MHz PC-10600 (KVR13N9S8K2 / 8), with the second RAM computer turns on, but after the Windows icon appears, a blue screen appears and reboots again! Actually Question: Problem in RAM? Intel i3-540 processor (supports 16 GB)

• Albert.

  Lenovo laptop Z565 There are two planks for 2 GB relatives, if there are two stripes, the screen is not a furyer, but when I clean everything works, it works, I tried to change it easily
  Can there be a problem in the nest or this software
  BIOS DISABLED CAN BATTERY DISABLED AND DO NOT TURN

• oleg

  i can not find a solution to the problem: at work 4 GB operatives, I also stood 4 GB by parameters. They are one to one, I will load two cops at once on the BIOS saved 40-45 seconds, then everything is according to plan, it's worth to pull one of Planks (leave 4 GB) everything falls into its places (BIOS screensaver is 3-5 seconds) Who suggests?

• Azo.

  Hello, in my laptop 4 connector under the RAM, it was originally stood in two lower connectors for 4 and 2 GB of planks, I decided to add more 2. In general, all the operating slats, the problem is that if in any top connector to stick The laptop will turn on, but the black screen and everything. If only in the bottom stick, then all the rules.

• Sinister615

  Hello, faced with such a problem, there was two stripes operatives, one on 1GGB second to 2 GB, both slots of the same color, frequency of 1333 MHz, my processor and maternal support those who bought. The problem is that when installing in two slots of new RAM, the keyboard stops working and writes on the screen to enter the BIOS and changed the parameters, if I install only one bar operatives, the keyboard works, I go to the BIOS I put everything on the car, apply the parameters and gives Two selections or run Windows or with some cleaning (recommended) (I don't remember exactly) In general, when you select the recommended selection of a blue screen with an error (driver error), if the standard download then the reboot will be constantly and again two selection of download options . The processor and motherboard up to 16GB operatives support, I add only 8 ... both planks are the same 1333 MHz.

• Alexander

  Hello. Need help: on maternal asus board P7P55-M? With processor Intel Core I5 CPU 750 2.67GHz (4 CPUS), there were two strips of DDR3 1333 MHz 2 GB (one manufacturer, in Nockets A1 B1), put another line DDR3 1333 MHz 2 GB (another manufacturer, in the A2 nest) - a compute The time is turned off and (after 10 seconds) it starts itself. Here I do not understand - this is the case in the RAM (in the player itself) or not in the nest inserted? ... Thanks in advance for the answer.

• anton

  i did how you said, did not shoot the static, in woolen socks on the carpet, ha ha, and then from the hand of zipper hit the computer turned off, .. and it does not turn on.
  I did not touch him, Chesslovo

• Vadim.

  added a DDR3 4G Orativa to the laptop, was 8G. And everything was fine, he wives it perfectly perfectly, but suddenly began to reboot and happen on the screen of the strip and everything hangs, it is necessary to reboot. Tell me, please, what's the matter?

• Dmitriy

  Hello. I have a GA-P55A-UD3 motherboard, there was a Kingston KHX1600C9AD3K2 / 4 memory / set two more HX324C11T3K4 and Windows strips stopped being loaded. BIOS passes fine, and Windows does not go on the download screen. If we take new planks, the system is loaded without problems. How to be?

• Valery

  I have such a question: operas stands in the computer. 4GB memory, and I found two planks in the old computer for 1GB. Can it be installed in new computer?

• Smokeroster.

• kvantov.

• Wolfwood.

  Good day. I have a laptop asus k40ij, wind7. Type of DDR2-800 RAM (PC2-6400) 2048 MB and bought 2 more GB .. Added to a notch, but why doesn't it show only 4 GB? Bought the KVR800D2S6 / 2G memory (2GB PC2-6400 CL6 200-PIN Sodimm)

• Wolfwood.

• pavel

  hello. In the laptop asus, the battery operative 2 GB. There is still a slot for memory. Put on 4 GB. Included checked shows 6 GB. But after 10 minutes, the screen went out. After multiple reboots, the screen sometimes lights up but goes out in a few minutes of work, although the beech works.

• Elena

  Help me please. The computer reboots in itself. It turns off and immediately turns on the cham. Help to the service center. We drove through the tests and said everything is fine. Connected via UPS. Changed a new accomulator. The problem did not disappear. I bought an additionally stabilizer. The stabilizer is very loudly felt periodically and shows an increased voltage. Although the electricians said that everything is normal. Through the stabilizer, the computer reboots even more often. For half a year I can not solve this problem. Thank you.

• Krecer.

  Help me please. I set the RAM, the computer started to squeak, 1 signal long 2 short, I found what the problem was and found a solution, but I didn't get anything, tell me what to do. Thanks in advance.

• svolond.

  Hello! The second day I am trying to solve the problem with the new RAM. I have already rummaged a bunch of similar topics on the forums, but I do not find solutions to your problem. Let me explain more:
  I have an Asus M4A785T-M motherboard, which, according to the manufacturer's description, supports 4 x DIMM memory, up to 16 GB, DDR3 1800 (O.C.) / 1600 (O.C.) / 1333/1066 ECC, Non-ECC, un-buffered.
  Operating system - Win 7, x64
  Now I have 2 strips DDR3 2 GB 667 MHz (PC3-10700H).
  I bought 4 staks DDR3: 4 GB 2RX4 PC3-12800H 1600 MHz one manufacturer.
  And problems began:
  1. When you try to install them, the computer did not include (the coolers were noisy, the sounds did not publish, the screen is black) even after a heap of manipulations with permutations of different boards into different connectors. I updated the BIOS, the computer saw 2 new RAMs (the BIOS version itself did not change for some reason).
  2. Now the computer turns on with two any new lights. With four - not a furyer, three - did not put. By changing the RAM couple, he checked them on the performance of the Windows service, the errors were not found until the end of the check, but after the reboot, the report for some reason is not highlighted.
  3. Next, I tried to play at least two new boards. I launch the tanks, I enter into battle and almost immediately flies out a blue screen with an error Memory_management 0x0000001a. I changed RAM in places, put the other two - the same result: crashes, only the time of the game varies with one - after 3 seconds, with others - after 20 seconds. While I stand in the hangar everything works, and it starts to fly only when loading the battle itself, i.e. When Vidyuha is connected to business.
  4. Put the old one - everything works fine.
  Return the new RAM back to the store is not an option. That can not 4 planks be defective?
  Tell me, please, what is the case? What else can be taken for normal operation?

• Savva

  Hello, why after installing additional RAM and blowing a computer from dust, the computer starts before the "Energy" inscription and nothing else happens?

• Aydar

• Konstantin

  Please tell me. There are two strips of 1 GB, I want to add another 2 GB, the system supports, there are two free slots. What is better: one on 2 GB, or two to 1GB? Thank you.

• Leone

  I have 4 places 2 for DDR2 and 2 for DDR3. It is installed only 1 DDR3 (2GB) Can I add another DDR3 on 2 GB? Or better to buy one DDR3 on 4GB, there is no difference!

• Shurik

  Please tell me. Installed on a laptop an additional 4GB RAM: DDR3, 1600MHz, 12800, in general, the same thing on the pre-installed RAM. As a result, 8GB. CPUZ - everything sees - both fees. And I enter the game and it goes with brakes. Previously walked on the best settings and less slowed down. What could be, besides what could be the defective fee? Thank you!

• ♕-Slawka-♕

  Hello everyone! I have such a problem.
  I have 2 slots for RAM slots on Mamka and there are two planks of 2GB. And somehow I put one bar on 2GB to another PC. When you turn on that PC, it began to squeak, I turned it off and pulled out my bar. Then he arrived home, insert the bar back, turn on the network, turn on my PC itself, it starts, but then it does not turn on the monitor screen. That is, the PC is noise, but does not turn on what just did not do, as the bar pull out, it starts on 2GB. As I put back the native second bar, again silence on the screen. Even in neither BIOS and no where to go. Please tell me it's already the player Kirdyk? Or how can I reanimate it? There is no second PC where it would be possible to check. Unfortunately.

• Yulia

  Hello. This question is: in the ASUS X73S laptop, the second slot was installed the second RAM on 4GB. After that, the place on the hard disk from the beginning is strange to change: after restarting or on / off, it shows different values \u200b\u200b- then 1,5GB is free, then immediately 7GB. On the viruses, the laptop was checked, unnecessary files, including temporary - deleted. Tell me, please, what could be the reason. Thank you.

• Yulia

• Yulia

• Deslorator.

  Hello, I now have 3 strips of 1GB. Two strips are the same, and the third one of the manufacturer, but in frequency the same. Documents another one. Now it became 3 of one manufacturer and 1 of the other, but the monitor does not light up. What to do in this case

• alex.

  Hello.
  After connecting the 2 boards of the OP in the laptop, the laptop stopped turned on. When inserted back the old DDR problem did not disappear. When the memory was changed (the battery was not pulled out), maybe because of this, burn the motherboard?

• Yuri.

  Hello. Me Maternally P5G41T-M LX, I bought a DDD3 Kingston KVR13N9S6 / 2. Installed, the computer turns on a black screen and everything. Say maybe this DDR does not fit.

• Yuri.

• Yuri.

  The result of connectors and old planks work, just on this motherboard, the new DDR3 models does not see, I checked 2 planks different 4GB and this 2GB Kingston and all 3 new new people.

Some outdated laptop models have not very balanced configurations, if you are to today. For example, this is the I7 processor and only four gigabytes of RAM. Is it possible to increase the RAM on the laptop? Sure. Its volume can be increased to eight or even sixteen gigabytes. And this will give a significant increase for performance while working with graphics and video, games. In addition, this is the most inexpensive method of upgrade.

It is necessary to take into account that to work with the scope of RAM, more than three gigabytes on the laptop will need to install the 64-bit version of the operating windows systemsIf a 32-bit is currently used.

What memory is needed for laptops

Before buying a plank and find out how to increase the amount of RAM on a laptop, it would be nice to know the number of connectors, the number of busy slots and the type of memory used.

The device can be disassembled (and if there is a separate lid, allowing you to access memory, then remove it), and then find and consider the labeling and the availability of connectors. Such information can be specified in the instructions for a laptop. But not every user will risk disassembled its device, so there are ways simpler.

It will help this free utility called CPU-Z, which shows all the information about the computer or laptop. You can download this program from the official site. There is a version that does not require installation, it starts directly from the archive.

Working with the program

After the utility is loaded and running, you need to pay attention to the tabs that will help with the Mission to increase RAM in the laptop. What are these tabs?

1. SPD. It displays the number of memory connectors, type and volume, as well as the manufacturer. If, when you select any slot, all fields are empty, it means there is no memory strap.
2. The Memory tab shows detailed information about the total amount of memory, its type and timings.
3. The MainBoard tab displays the details about the device's motherboard. These data will help find all the characteristics of the board and its chipset on the Internet, and then find out the type and volume of supported RAM.

Most often enough information that is contained only on the SPD tab. It is there that the type of memory is specified, its frequency, the number of connectors. Using all this data, you can understand how to increase the operational memory on a laptop, is there a chance for upgrades, and that it will be necessary for this. For example, you can find out which slot is busy with what kind of module, which is used by the chipset, whether the memory in multichannel mode works, what is the maximum allowable amount of memory. The last is looking for on the Internet.

In order for memory to work in which is more preferable, two completely identical memory bar must be needed in two connectors.

The following example will show how to increase the RAM on the laptop (ASUS, HP, Lenovo and others). Sometimes the device manufacturer provides lightweight access to the modules due to the presence of a separate lid on the bottom surface.

If the user has a compact laptop or a very thin ultrabook, then no matter what a lid can be speech. The disassembly scheme for each model is completely unique. It is also important to note that for some laptops, this operation is a direct deprivation of warranty service. You need to have this in mind.

Sequencing

How on a laptop What are the steps? First, as it is easy to guess, you need to turn off the laptop. From the rosette cord too need to be removed. And it is also desirable to take out the battery in order to delay it completely. Then, using a screwdriver, you must neatly open the lid under which you can see the RAM strips, which are installed in their slots. They need to be very careful to extract, and add new ones.

In the process of extracting, it is necessary to pay attention to the fact that most often the planks on the sides are fixed by special latch holders. They need to bendled. When inserting memory modules you need to do it very tightly and press until the latches snap. This happens on the overwhelming majority of models. The whole process is relatively not complicated.

Completion of work

After completing all actions, you need to return the lid to your place, insert the battery and run the laptop. Then you need to check if it sees operating system Installed RAM modules.

If everything works as it should, then the user can be congratulated, since now its new store will work much faster, and productivity will increase several times.

And if something is wrong, it is not possible to replace it scary, it is better to turn to a qualified master who knows how to increase the RAM on the laptop.

Without a doubt, run It is considered one of the most important components of a laptop computer. If any difficulties arise with it, it brings many problems with him. In any case, all problems with Oz qualitatively and quickly solved only in our service center. You can contact us on any matter. Repair of any complexity Specialists are carried out in the shortest possible time and, which is very important, no longer need to worry about how much is Repair or component. Our advantage is that we always use only original details. They get to us right from the manufacturer's factory, which means that we do not work with dealers, respectively, price - Low. Browse our price list. If suddenly you will be able to find cost Less than us, you will be discount.

We are sometimes treated with the problem - it is necessary replacing RAM in the laptop. Naturally, this is an operation that requires a special approach. We do not advise to try independently replace Accessories, as such attempts in most cases lead to the fact that the entire laptop computer goes out. We advise you to trust only specialists and do not act on your risk and fear. In our workshop GSMMoscow, all conditions are arranged for comprehensive diagnostics and repair. Quality installation It is possible only from us. In our warehouse there is a huge range of OP modules for models different manufacturers. Addition Memory to be made quickly and efficiently. Thus, we can not only replace, but also upgrade your equipment. And does not matter what brand of your laptop -

Adding and increasing the laptop's RAM at wholesale price. Only we have it possible.

Many users do not satisfy the volume Oz A portable computer, as it may not be enough to perform special resource-intensive tasks. Especially if it concerns engineering programs. There is still a yield, you can add RAM to the laptop. But to do it, not so simple. Much harder than in a stationary computer. Would need installation new memory modules. The first thing that worries our customers, how much is Such a service. We can confidently say that the cost of increasing the laptop RAM We are really the most affordable.

Main advantages:

1. Run It is established and changing only by qualified specialists who undergo special training and have extensive experience.

2. Only original components are used in the paper. Despite this, their price is minimal. We are soaking HP, ASUS, ACER, Sony Vaio., SAMSUNG, TOSHIBA, LENOVO, DELL.

3. After the repair is carried out, we will issue a warranty for all the technique for up to 1 year.

How much time do you need to replace the laptop's operational memory?

By time, the replacement of RAM in the laptop leaves from 20 minutes.

Example from life.

Our workshop addressed a client with a problem. The fact is that the established memory he lacked for comfortable work. He wanted to increase memory. Our specialists immediately started work. First of all, Laptop was distributed. By installing additional modules, the problem was solved. Before returning the equipment, testing was carried out. As soon as we have been convinced that everything is canceled, they gave a warranty for a year. An hour later, the user was able to pick up his apparatus and enjoy his excellent work.

Program requirements for the volume of available memory are growing with each month - each a new version Requires memory more and more. Often the situation when a laptop, a couple more years ago perfectly coped with my tasks, today mercilessly "slows down". Perhaps the case is in unnecessary services and unnecessary automatically launched programs; Perhaps the computer was swinging on the computer. But if the antivirus does not find anything, and the cleaning and reinstallation of the system do not help, then perhaps the problem is in the disadvantage of RAM. How to find out that it is in a shortage of memory?
In Windows - using the Task Manager caused by the Ctrl-Alt-Del keyboard. In Linux you can use fREE programAnd in OS X - the system monitor ("programs" - "utilities" - "monitoring system").

When free RAM is committed to 0, the system begins to use the paging file - part of the data is transferred from memory to hDD. Work speed S. hard disk On orders lower than with the RAM, so the appeal to such data can "hang" a computer for several minutes to perform an operation that usually takes no longer a second. You need to increase the amount of memory.

Windows:	Linux:	OS X:
The memory type and frequency of the installed module can be seen on the SPD tab. The number of free and busy slots can be found by calling the drop-down list of Memory Slot Selection	dmidecode shows the number of slots, type and speed for each busy slot and marks the phrase "No Module Installed" every free slot.	Information minimum, but this is enough to buy a new memory module

First of all, you should make sure that the laptop has a reserve for its increase. To begin with, refer to the description of the laptop on the manufacturer's website (or to the instruction manual) and find out what is the maximum amount of memory for your model. If the memory capacity reserve is available, you need to make sure that there are free slots for memory modules in a laptop. On OS X it can be done standard means - Using the "Memory" tab of the "System Information" window. In Linux, you can use the Dmidecode program (enters most of the repository). For Windows, the choice of suitable programs is large, but many of them are not reflectable. From free, you can recommend CPU-Z.
Of course, you can simply open the memory cover and see if there is a free slot there. But, first, it is not always possible (for example, if a laptop is still on warranty and the cover is sealed by a warranty sticker). Secondly, the information obtained using these programs will be needed when purchasing new memory modules, because the main characteristics (memory and frequency type) of the new modules must match the characteristics of the already installed. For some laptops it is necessary to coincide and the rank (the number of logical memory modules inside one physical) memory modules. To enable two-channel mode (speeding up memory), it is desirable to coincide and the capacity of the modules. It is also desirable that new and old modules have identical timings (about them further) and even the manufacturer. Failure last requirements It may not affect the operation of the system, and maybe lead to various failures and "glitches" - how lucky. And in general, the more similar to the installed memory blocks, the higher the chance that the laptop will turn on and will work without problems.

What to do if there is no free slots of memory, and there is a reserve for magnifying the model? Sell \u200b\u200bavailable memory modules and buy new, greater. The same option can be recommended if there is a free slot, but the identical installed module cannot be found. When buying a new set, you are not entirely related to the requirements of the old memory module and you can select models with improved characteristics.
Please note that 32-bit versions of Windows do not support more than 3 GB of RAM. Therefore, if you are going to increase memory from 2 to 4 GB, and you have a 32-bit version of Windows, it will not be necessary before purchasing memory to try to install the 64-bit version and make sure that the laptop and all the peripherals work correctly with this system.

Characteristics of memory modules.

Form factormemory modules for laptops One for all types - SO-DIMM.

Memory type. When buying an additional module, the type of memory must necessarily match the memory type already installed. When buying a set of the whole - the higher the type (DDR - DDR2 - DDR3 - DDR4), the higher the speed of memory and below power consumption. But again, it is necessary to make sure (learn from the documentation or description on the website of the laptop manufacturer) that the selected memory type is supported by the laptop.
From this chain, DDR3L is slightly knocked out. This type of memory is completely identical to DDR3, but has a reduced 10% power consumption. For laptops, this is quite important, since the lower power consumption, the higher the duration of the battery. Therefore, choosing between DDR3 and DDR3L, it is better to stay on the latter (of course, subject to the support of this type of memory with a laptop).

Frequency- Another important parameter of RAM, which directly affects the speed of working with memory. The higher the frequency, the better, but, first, the frequencies of all installed modules must coincide, secondly, the frequency must be supported by a laptop.

Memory size. Requirements software The volume of memory is growing all the time, so the recommendations for the necessary amount of memory are quickly observed. To date, 2 GB is a minimum, sufficient for the normal operation of office applications (Word, Excel) and Internet access. For full use graphic packages Like Photoshop or CorelDRAW, watching video in HD format and undemanding games will be enough 4 GB of memory. Full gaming laptop It will require from 8 GB of memory as a professional workstation to work with video or 3D scenes.

Timing- Delays in memory access, are considered in frequency tacks. Main timings:

Cas Latency.	Ras to Cas Delay

- CAS LATENCY (CL) - Delay between the query to a specific memory block and the beginning of receiving / data transmission. This parameter is the most characteristic, for DDR3 its value should be 9-11, depending on the frequency; For DDR4 - 15-16. Large latency values \u200b\u200bare undesirable;
- Ras to Cas Delay (TRCD) - a delay between the definition of a string and a column with the necessary data (the memory is organized in a tabular form and to obtain certain data you need to transfer the row and column numbers)
- RAS PRECHARGE (TRP) - the final delay after operation with data before the next operation.
In memory characteristics, timings are often recorded as CL-TRCD-TRP. For example, 5-5-5. The smaller the timing, the memory is faster, but only the same type of modules should be compared according to this parameter. With increasing frequency, the timings are inevitably growing, and the timing of 15 for a module with a frequency of 2400 MHz along the delay duration is compared with the timing 5 for the frequency of 800 MHz (1/2400 * 15 \u003d 1/800 * 5).

Placing chips. Memory chips (microcircuits) on modules can be placed both from one and on both sides. This does not affect the memory characteristics, but it is necessary to pay attention to this: modules with double-sided chip installation have a greater thickness and may simply not fit into a free slot.

If you decide to update all RAM, pay attention to sets of RAMconsisting of 2 or 4 modules specifically selected to ensure memory work in two- or four-channel mode. Two-channel mode speeds up work with memory due to the possibility of simultaneous access to two memory areas located on different modules. Theoretically, such a mode must accelerate the work with memory twice, but practically productivity growth ranges from 5 to 15%. For memory operation in two-channel mode, it is necessary that the laptop motherboard maintains such a mode (implemented in all modern motherboards) So that the memory modules are even quantity and that they are identical. Although usually a two-channel mode is activated on the memory modules without any problems, buying a memory set is a guarantee of including this mode.

Manufacturer. The production of RAM is a high-tech process that requires the highest culture of production and modern equipment. The percentage of marriage is present at any manufacturer, but only industry flagships are able to provide a low percentage of marriage and its timely identification. Buying memory of a little-known manufacturer - always Lottery: If you are lucky, the memory of faith and the truth will work years, demonstrating quite good characteristics. If not lucky, and the defective chip will fall, then it is not a fact that you can change it under warranty: Marriage of memory can lead to hard-looking mistakes that arise randomly or only under certain conditions. Therefore, if you are important, stable and productive memory work, take the modules of verified manufacturers, such as AMD, Corsair, Crucial, Transcend, Kingston.