Why is the entire RAM on the computer busy. The physical memory of the computer is loaded, what to do? Methods for cleaning the computer memory

Are an integral element of any computer, playing the role of the link between and long term memory (. Over time, the forms and models of RAM microcircuits changed, did not change the main thing - the purpose ...

Why missing RAM?

Start with the fact that rAM Today, has higher characteristics, such as speed and frequency. In the current assemblies of computers, DDR3 is mainly used, the model of recent developments, naturally, is more productive in comparison with predecessors. In new computers and laptops, about 3 gigabytes of RAM is increasingly installed (for example, for normal windows work XP required no more than 512 megabytes), it is due to the increasing requests of users to the PC.

Not always the number of RAM and user requests coincide, then the noticeable shortage of system resources begins, which is most often expressed in braking and problematic launch of some programs.

Then it is worth asked by the number of RAM and what she is spent in the system. Of course, if only 1 gigabyte memory has been installed on the computer, then you should not wait a lot from performance in new versions of Windows operating systems.

What programs do RAM occupy?

There are a number of programs that often occupy more RAM compared to the rest of the software. So, for example, the main "absorber" of RAM will become, with something, without a difference, he is developing and what version. The second on the occupied RAM can be called video - installation. Also do not forget about computer Gameswhich per hour require up to 6 - 8 gigabytes of RAM to work in high-performance mode!

Note! In addition to programs, the Operating itself windows systemFrom the SEVEN version, uses RAM resources as cache for frequently used system files!

Instead of pre-school

• If you expect to get stable and the most productive work, then it is worth thinking about. Of course, it may be so the free slot will not be or not at all there is no RAM model, in such cases it ends with a complete upgrade of the computer!
• If you are an average user, then you will quite by one - two gigabytes, which are enough for normal operation in the office cycle of work. Such a number of RAM is enough for small games and to work with office documents, accompanied by an antivirus program.

The main thing is to follow the state of the operating system as a whole, try to exclude programs from the startup and not run an intermediate number of applications at the same time.

The free computer program (the famous manufacturer) described today will help (perhaps) to those users who are always lacking memory that have little it.

It will be about - she will allow you on time clear computer prompt memory By defragmentation.

Personally, I think that such programs are temporary and forced to solve the problem of lack of RAM. To fully relieve this question can only physically increase its volume (buying an optional RAM bar).

But not all users can afford easily to fork out for such a purchase - the operational memory for the computer today is worth a decent money 🙁.

How to determine the shortage of memory

Very simple. After starting the computer, it works for some time smartly, and then begins to "shy". The programs and the browser will begin to work more slowly. Website pages - there are few RAM in the computer.

Clear the prompt memory of the Wise Memory Optimizer computer allows you to turn off the unnecessary consumers, the closure of unnecessary background processes and its defragmentation.

Wise Memory Optimizer is available manual mode and automatic - program in the right moment (When the specified number of occupied memory is reached), it produces cleaning.

By the way, the manufacturers have the same program that they created excellent cleansings -.

Let's already clean the RAM (: Connie_13. Everything is very simple - run downloaded (according to the official link at the end of the article) and the installed Wise Memory Optimizer ...

Go to the settings and exhibit Russian ...

Described today is free computer program (The famous manufacturer) will help (perhaps) to those users who are always lacking memory that have little it. It will be about - she ...

In the process of continuous operation of some programs, memory is clogged, and the speed falls.
Tell me, please, how can I clean the RAM?

Surely you noticed that the computer begins to "slow down", loading the application, and even ceases to respond to commands.
This is due to the overflow of RAM and it must be cleaned.

In the operating system of sewn, own service for cleaning RAM, unfortunately it does not always work efficiently and the user to completely clean the RAM, restarts the computer.

There are other ways to use special utilities.
One of them is CleanMem, but in contrast to most similar programs, it does not unload the contents of RAM on hDD, but simply exempts reserved by various programs, but not used location, which allows the memory to be released, and the performance does not reduce.

The program informs how much memory is occupied by both processes and can work as in manual modeSo in the automatic, running with a certain frequency, for example, every 30 minutes.

In the Start menu, run the "CleanMem Mini Monitor" monitor.
The icon will appear in the system tray, which will actually show how much RAM is occupied as a percentage, and the information panel will appear.

To get more detailed information about the memory status, select in the CleanMem menu by right-clicking on the CleanMem icon in the tray, the show "Show Memory Info", and to view the processes - "Show Process Info".
The utility will display detailed information about the cache memory and processes performed.

To start cleaning memory and file cache in manual mode, select "Clean Memory Now" and "Clean File Cache Now" in the CleanMem menu.

To configure the RAM automatic cleaning, select "Monitor Setting" in the CleanMem menu and in the window that opens, go to the Advanced Monitor tab, place checkboxes in Chekboxes and set the check interval, for example, equal to 30 minutes.

Now the utility will check the rapid memory every 30 minutes and clean it if the download is 75%.
In addition, the memory will be cleared and if during the next check the program will find that the size of the file cache exceeds 50 MB.

CleanMem is quite easy to use, quickly installed and instantly starts.

There is a professional version of the program, but paid is different only by what has a number additional settingswho can evaluate real professionals, and for most users it is enough and free version.

RAM is the most important component of any computer or laptop. To a greater extent, it determines the speed of the device and, accordingly, the more RAM will be installed on the computer, the better it will work easier. You can increase computer performance by an increase in the physical memory of the memory, but in Windows 7 of the same result can be somewhat different ways, for example, clean.

What is operational, physical and video memory

All operations with information carry out cPU Computer, and he does it only with the one that is contained in the operational storage device. Many different information is downloaded here, including intermediate results of a variety of computing and current data. Literally all operations that computer performs, refer to RAM and its subsequent use. Thus, you can make a simple conclusion - everything you do on a computer, one way or another, can consume RAM resources. Thanks to this, it becomes clear why computers with a small amount of RAM work are much worse than other devices with large resources.

In addition to the operational storage device, there are several more memory types, it is physical and video memory.

If you look at the system indicators that display the number of RAM, then surely surprise, because there will be a little smaller volume there than you installed. Some operational memory system automatically reserves for the a meager of the central processor. As a rule, this volume is not very large, but is mandatory for the work of the "brain" of a personal computer. It is this part that is called the physical memory of the device.

Each video adapter has its memory. In essence, this is the same RAM, only installed on a separate component of the computer, which performs the image transfer function to the monitor. Unlike traditional RAM planks, each of which the owner of the PC can independently replace (add, remove some or replace them), the video memory is non-removable. As a result, it is possible to increase this memory volume only by replacing the old video adapter to the new or purchase of an additional video card.

How to see what the battery is busy

Windows 7 operating system can show the user information about what this moment Time is busy prompt memory of the computer. All this can be viewed independently, without additional tools, using system, built-in features. This users will help the "Task Manager" will help. It can be opened in two ways: Press the keyboard a Ctrl + Alt + Del keyboard and select the Task Manager application in the menu. Right-click on the "taskbar" and choose "Task Manager" there.

By default, the program automatically opens the program "Speed" tab. Here you can look at the workload of the central processor at the current time, on how much it is used running programs, as well as take a look at the chronology of using physical memory. In some cases it may be needed. Nevertheless, it contains only a schedule for loading individual elements of the system, and more accurate and detailed information users can find in the Processes tab.

In "processes", all information on the launched applications on the computer is indicated, including even those processes that appeared as a result of failures. In the leftmost column, you can see the name of the process, in the penultimate number of a busy one or another process of RAM, and in the extreme right - detailed description. In this way, you can look at the table and sort all processes, for example, by the number of resources consumed and, if necessary, complete them.

How to free up the operational memory of the computer

RAM is often a scarce resource for a variety of applications. Some of them launches completely consciously, while others start working on the "will" system or due to autoload. Do not forget that there are applications that consciously harm the device can consume a significant part of system resources - malicious software. Be that as it may, they all consume RAM, so the user needs to regularly clean RAM.

Close unnecessary programs and applications

The easiest way to clean RAM is to disable various programs and applications.

Thus, it is possible to free some of the physical memory. All active programs and applications The Windows 7 operating system displays in the form of special icons located at the bottom of the screen, on the "taskbar". Thanks to the new Aero interface, which appeared in OS Windows Vista.The user can easily view the working type of windows. Thus you can understand - in which windows it remains important, unsaved information. All those applications in which you do not need now can turn off and increase the speed, free up the computer's memory, and for this it is enough to click on the cross, located in the top of the active window.

Separately, you should mention about the work of web browsers. The fact is that every new insetwhich you open in the browser is a separate process for the system. Thus, if the number of such tabs is large, and the amount of RAM, on the contrary, is small, the speed of your computer will deteriorate significantly. If you don't need a browser now, then close it completely. If you need only some separate tabs, then leave them, and the rest is removed. For example, it often happens that users introduce a request to the search engine and leave this tab open. It will also use system resources, so make sure that all the tabs that you do not need are disabled.

If necessary, users can use the Task Manager to disable active applications. This will require:

All active tasks will be displayed here, including those that cannot be closed by simply pressing the "cross" in the upper right corner of the window (dependent applications). Try to use this method only when some programs on your computer depended and do not respond to actions.

Remember that in this way to disable applications is better not to abuse. In this case, this is an emergency shutdown of the program and, of course, some data may not be saved. In addition, such a way off can cause problems with the subsequent launch of the application.

Closing background processes and services

Some types of programs and applications work in the so-called background mode and consume RAM. As a rule, they do not have an active window. All their interface is either folded in the tray, or not at all noticeable. Nevertheless, this does not mean that they do not consume system resources. It is often that they become the reason for reducing the speed of a personal computer, deterioration of its performance. Therefore, it is recommended to at least sometimes check all processes. This follows:

All active processes will be displayed here. Be careful - do not turn off system processes, as this can lead to problems in the computer. If you have no idea what you can turn off, and what is not, then take a look at the name of the process itself. As a rule, it is identical to the name of the application or is very similar to it. See familiar unnecessary processes, then feel free to disconnect them.

PC users rarely pay attention to running services. They, along with other applications and processes, consume resources, namely, occupy the physical memory of the computer. Some of the services are systemic, the disconnection of which can lead to problems, but there are those that can be disabled without problems. View a list of all services running on a computer as follows:

As soon as you click on the "services", a special window will open, where complete information on this or that service on the computer will be displayed. Without a doubt, you can disable the following types of services: "IP Support Service", as it is just useless to home computer And has no practical value. "Secondary entry into the system" - it is advisable to disable security for security reasons. "Customer tracking changed links" - a service that will not need the usual user at all. "SSDP detection" - you need to include only if you have devices connected to a computer using the SSDP protocol. " Windows search (Windows Search) "- the service is necessary only if you are too active using the computer search. "Fax" - service can be left active only if you use a computer as a fax.

Cleaning the parameters of autoload

The autoload is performed immediately after starting the graphic shell. In this case, all programs, applications included in the autoload list, will be uploaded to the computer's RAM. Typically, various anti-virus applications are prescribed by the user's safety while working on the network, postal applications (Messengers), browsers, as well as malicious programs, provided that they are on the computer and have not been identified by any antivirus software. If the user does not regularly check the parameters of "autoload", then with time there may be a set of unnecessary applications, which will partially consume RAM resources.

Most effective method The autoload cleaning is to change the system configuration. To start it, it follows:

All programs and applications that run automatically will be displayed with your operating system. All unfamiliar names you can disable without any problems.

Please note that system utilities can be prescribed in the "autoload", a shutdown of which can lead to failures during computer operation. Therefore, be careful.

Restarting Windows Explorer

You can free up a small part of the RAM if you re-run the Windows Explorer process. It is nothing but a user interface (Start menu, windows, etc.). First you have to turn it off, and then re-register in a special line and run. So you will free some part of RAM. To do this, you will need to do the following:

After that, the entire interface of the operating system should be lost, but do not worry - everything goes as it should. The next step will be re-launching the process:

All icons, the interface will immediately return to the place, and at the same time some part of the operational memory of your computer will be released.

Team Regedit.

You can free up a small part of memory using the REGEDIT command - cleaning system registry. This will require:

A special registry editor will appear where you have to move on it, find:

All these directories include software shortcuts that run automatically, without user participation. They are located in the section Right.

Be careful, since the change in the data in the registry requires certain qualifications and caution. Removing important system components can lead to disasters in the computer.

Removal of malware

A little higher has already been said that some varieties malicious programs Can consume exclusively system resources. Others, less dangerous simply use RAM for their work. In any case, it is necessary to deal with these missticks to return the computer to the previous state. You can detect and delete malware using antiviruses. Before, today developers provide free versions, with limited functionality, but even so they are fully able to protect the computer from threats from the outside. For scanning and removing viruses, enough:

Cleaning the hard drive of a computer

The hard disk of the computer is often not easy. It can store a huge amount of data, including those that no program or the application also use. All this over time can lead to a deterioration in computer performance. In addition, it is on a hard disk that a certain amount is blocked in advance for storing the paging file, which is otherwise called virtual memory. The system resorts to its use in the event that RAM resources are not enough. Then information is recorded in virtual memory and subsequently everything you need is taken from there, but for efficient work It is necessary that a sufficient amount of free space be on the rigid disk. That is why experts recommend regularly deleting unused programs, clean the basket and get rid of outdated files. In addition, it is recommended to perform defragmentation hard disk. It will complain everything required files And folders into specific sections on the hard disk, which allow the system in the future much faster and easier to find them without loading the RAM or virtual. This can be done as follows:

Video: How to unload RAM

Special programs for cleaning RAM

If you for some reason are worried that you can harm your computer, for example, remove some files Or close system processes, you can use the software. It has all the necessary functionality for cleaning and unloading RAM.

Advanced Systemcare.

This application is a whole set of settings for working with the operating system. With its help, users can clean the computer's operational memory from unnecessary data. Developers deliver this program in two variations - paid and free. In the first case, the functionality will be somewhat richer, but in the second you will get the same possibility of unloading RAM, and completely free. It should be noted that in the free version there are not the most pleasant "surprises" in the form of additional programs installed. Therefore, when installing, you should specify the "selective installation" and remove everything too much so as not to clog your computer even more. If you are an inexperienced user, you can change the interface to "simplified". In the "Expert" mode, you can specify all the data that will be subject to thorough check. Change the parameters at your discretion and click on the "Check" button. After this procedure is completed, click "Fix" and you will get the result that you wanted.

It should be noted that in whatever mode you have been checking, unless information from RAM still will be deleted by the program and you are released a significant part of RAM.

Wise Memory Optimizer.

Wise Memory Optimizer is no longer such a professional program, but still allows you to produce all the necessary manipulations over the RAM. It is free and has Russian localization, so anyone can download and install it without any problems personal Computer. No special knowledge and skills to work with this utility you will need. You can download a portable version of a program that does not require installation, but performs all the same functions. To clean and unload the RAM, it is enough to start the application and click on the "Optimize" button. After completion of the procedure, it is advisable to restart the personal computer, and you will immediately notice how faster and better it began to work.

nCleaner

it free app, along with others, allows the owner of the PC to optimize its own device, and not only by freeing the RAM. She can delete temporary and unnecessary fileswhich are not used by any applications, delete data from the registry and clean information in RAM. To clean the RAM, it is enough to select "Find Garbage" (Find Junk), click on the "Analyze" button and wait for the end of the procedure.

Cleanmem.

This is one of the simplest utilities that make it possible to clean the RAM. It does not have any third-party functions, therefore it takes the minimum space on the hard disk. In the application settings, the user can change the parameters of the display of processes, the program icon in the tray and change other insignificant parameters. Perhaps the most important feature of the program can be called what it will work in automatic mode. You do not have to regularly launch the RAM check with your own hands. It will be embedded in the RAM every thirty minutes, search for hidden and reserved data and unload them, and all this will occur automatically after installation.

VC Ramcleaner

VC Ramcleaner is an analogue of the previous utility. This is also a small and simple application used purely for cleaning and unloading RAM. After starting the utility, you will receive information about the maximum volume of RAM on the computer and the currently used. Click the Clean System Memory button, and you immediately, after the completion of the cleaning procedure, get the desired result. The procedure can be done properly or specify an acceptable time interval in the settings, after which the program will automatically re-analyze the system.

MemoryCleaner

The program just like the rest has a simple interface, does not take too much space on the hard drive and allows you to unload the RAM. After starting, you will be enough to click on the START button, the procedure for checking and cleaning will start. Results and history of checks can be viewed in the appropriate tab. The utility shows up-to-date information on the volume of RAM, used quantity and purified.

RAM MEMORY CLEANER AND OPTIMIZER

The same easy-to-use, small program that will suit each user. After installing and running, a window will appear where current information is displayed on system resources consumed at the current time. Despite the seeming simplicity of the utility, it allows you to free not only RAM, but also a central processor. To do this, it is enough to click on the Start Optimizer button. You can minimize the application in the tray and not completing the process, then the utility will systematically be implemented in the operational memory of the device and regularly release it from unnecessary information.

How not to clog the operational memory of the computer

In order not to litter the RAM of the computer, it is enough to regularly monitor what programs you have open. If some launched app You do not need now, then feel free to cover it. Do not forget about the fact that each web browser tab also consumes RAM, so during web surfing, try to remove those sites that you no longer need. Often users forget to reboot their computer, and such a simple procedure largely contributes to unloading RAM. The last thing you can mention in this case are using antivirus to prevent malicious software from entering your computer. Many viruses and worms consume a lot of RAM, which will not affect the speed of PC.

The video memory, due to its specifics, does not need any specialized cleaning. The user will be enough to restart the computer or re-install the drivers for the graphics adapter.

How to clean virtual memory

Virtual memory has no less valid than the operational. The device usually resorts to its use in the event that RAM resources are not enough. Therefore, users are advised to regularly produce its cleaning. You can do this in two ways: using the "Control Panel" or "Editor group Policy».

In the first case you will need:

Here will be displayed current information about computer virtual data. Change the parameters of the paging file using the "Set" button and specify the optimal value.

Remember that it should be no more than 50% of the volume of RAM.

In the second case:

1. Click on the keyboard the combination of the Win + R keys;
2. In the displayed string, enter the name of the application gpedit.msc;
3. Go to the "Computer Configuration" tab;
4. Open " Windows configuration"And select the right" security settings ";
5. In the Local Policy folder, go to the "Security Parameters" directory;
6. In the list it is necessary to find the option "Shutdown: Clearing virtual memory paging file" and launch the parameters;
7. The last step is to change the switch to the "enabled" position and confirm the changes.

Video: How to work with virtual memory

Manually either with the help of additional utilities each user can release a significant part of the RAM and increase the speed own computer, optimize it and continue to work without failures and freezes. Regular cleaning and unloading of RAM will bring an excellent result.

What does computer memory and how to clean it

If you remember, not so long ago I published a blog in which I told about the processor load. So, I want to hold a parallel here, since applications that ship CPU also occupy and rapid memory.

And this means that we will use the same tools to identify resource-intensive processes. It is good because people are lazy for their kind and learn something new wants not always.

Starting, of course, with the task manager already known to us. Click on the keyboard the magic combination Ctrl + Alt + Del and begin to understand. Oh yes, it is interesting.

Immediately we sort the "Memory" column as descending and see the programs that eat the resources most. The simplest thing you can do is to call the optional menu and complete the process.

But again I want to warn. See what you close. Systemic windows processes No idea does not touch. And you can find out that the system uses it using the "Details" function or using the search on the Internet. The picture above is the example of such a (system) process.

Do not pour browser tabs

We all love to sit on the Internet. Well, without him in our time. It often happens that the user in the browser is open a whole pool of tabs. Of course, because many have time to read the news at the same time, correspond in social. Networks and, for example, check mail. Wunderkind!

Each such tab is in the computer's RAM. Count how easy it is possible to download it to the limit. Hence the output: Do not hold the pages unnecessary to you in the open state. Why guys? We used and closed. It's so easy.

The following example shows that for each such page Yandex.Bruezer launches a separate process. And now imagine if the volume of RAM on the computer is so grabbing. There is something to think about.

Look at the autoload and service

I think everything is clear here. We go into the same names of the task manager and see whether everything from the list really needs to work in the background.

Quite often in the network in cases of acute memory shortage, they are advised to disconnect services that are not directly related to Microsoft, that is, to systemic. As for me, the measure is not quite popular, but has the right to life.

Is done as follows example Windows 10. In the search bar, you drive the combination shown below the figure below and go to the "Services" section.

Of course, after action with autoload and services, it is advisable to restart the computer. Well, how did he turn on you? So you did everything right. And I asked himself in this place to think that the post smoothly switched to the topic, how to clean RAM. 😉

Let's summarize. Now you know how to analyze the occupied computer memory. If all of the listed manipulations did not help you, perhaps it is time to think about an increase in its volume. What do you think about this? Write in the comments.