What does it mean to return the computer to the initial state. What does it mean to return the computer to the initial state to return the computer to the original state of Windows 10

The Windows 10 operating system has been improved by Microsoft, compared with Windows 8 and earlier versions, on a number of indicators. One of them is the process reset Windows to the initial state, which was significantly changed. More than a user who wishes to reset the operating system to the base state, no disk or flash drive is required with it - all required files Store on the computer, and restoration can be made directly from them.

To resort to system rollback to the source state should be in extreme cases where the recovery points did not allow to solve the problems. As part of this material, we suggest familiarizing yourself with the instructions, how to reset Windows 10 to the original state at various faults. operating system. Also in the material provides information on what to do if problems arise when returning the PC to its original state.

How to reset Windows 10 from the system interface

If Windows 10 operating system runs on a computer, but for some reason, it was necessary to roll out it to the original state, it was fairly easy. Run the automatic reinstalling Windows 10 can be as follows:

After some time (depending on the volume hard disk On a computer), the system will delete all files or moves some of them to the Windows.old folder (if the option with saving files) is selected. After that, the computer will restart and reinstall Windows 10. After some time, the computer will boot with a "clean" operating system.

How to reset windows 10 if the system does not load

If the computer system is not loaded, it is quite simple to reset it, but only when you have a predetermined boot flash drive or disk windows restoration 10. If you have been concerned about creating them, to roll back the operating system to the initial state, it is enough to do the following:

During system rollback, the computer will reboot several times and it will be necessary to configure its base parameters.

Problem when returning a PC to its original state

When you try to reset the computer on Windows 10 to the original state, an error may occur that will not allow this to do. This problem arises due to the fact that the files required to restore the system are not detected on the computer. Reset Windows 10 to the source state occurs using files that are located in the WINSXS folder. If they have been removed in whole or in part, an error may appear that notifies that the problem occurred when the PC is returned to its original state.

In this case, you need to start command line On behalf of the administrator, after which it is written in it the SFC / ScanNow command and press ENTER. The computer will start checking the integrity of Windows files and the loading of the missing, if any.

If the "problem when returning a PC to its original state" was not solved after checking windows integrityThis will require an installation using a disc with an operating system or another boot drive.

OKEYGEEK.RU.

Return the computer to the original state of Windows 10

In Windows 10 there is a "Return a computer to the original state" function, which quickly restores Windows to the primary settings, that is, the system becomes clean as if you were only installed. It is more convenient and faster than reinstalling Windows from scratch.

This feature was still in Windows 8, but it was removed during the system to reset, and Windows 10 gives you a choice to save personal files or not.

What does the "Return the computer back to the original state"

When you click on "start" in the "Return the computer to the original state" function, the Windows system is reset to the initial state. If you bought a computer with already installed windows 10, then after resetting the system will be in the same condition as when buying. That is, the software and drivers supplied with PC will be reset to the primary state. If you installed Windows 10 yourself, after reset - it will be a clean Windows 10 system without additional software.

During reset, you can choose to save personal files or not, but still all software installed And the settings will be deleted. That is, if your system constantly issues errors, everything slows down and you cannot find the cause - you can reset the system using this function and all possible reasons disappear. But before resetting the system, I recommend checking the system for malicious software using AdwCleaner, Malwarebytes and Zemana, even if you have a praised antivirus software. Perhaps checking the system and correcting it - the need for a reset function will disappear.

From the description of this function from Microsoft:

1. Computer is loaded in Windows Re in Windows Recovery Environment;

2.Windows Ree erases and format partitions before installing a new copy of Windows;

3. Computer is loaded from the new copy of Windows.

If you select Save Personal Files, before removing the Windows Re section, you scans a hard disk for the presence of personal files, after which it saves them \u003d\u003e Sets a new a copy of Windows \u003d\u003e And places these files back to where they were before resetting the system.

In both cases, saving and not saving personal data, you get clean Windows without installed software.

How to return the computer to the original state from Windows.

To reset the computer to the factory default settings - you need:

1. Add to "Start" and select "Parameters";

2. Go to "Update and Security";

3. Select "Restore" in the left column and near "Return a computer to the original state" click "Start";

4. There will be prompted to save personal files or delete everything. As it seemed above, so that you do not choose all applications and settings will be deleted and you will get a clean system. But in one embodiment, your personal files will be returned to the clean system, and in the other - the whole system will be clean, not only applications and settings will be deleted, but your files.

The second option is ideal if you do not plan to use this computer anymore and give it to someone else, or you just decided to start a new life. Dive all 🙂

5.If you pressed "Delete All", then in the next window you will need to delete data from the disk where Windows is installed, or delete everything from all disks.

How to return the computer to the original state from Windows, even if the computer came with installed by

As already written earlier, if you bought a computer with the already installed Windows 10, then there may be already installed software from the manufacturer of your computer. And even after reset, all these applications will not disappear, but reinstall the initial state.

Well, if the necessary drivers are simply installed there, but if there have been a lot of different trash stuffed there? With a large August update, 1607 added the ability to make the system clean, even if it was with an additional software when buying a device. That is, if you bought a computer, and there are many different software from the manufacturer and the usual reset does not make the system completely clean - we do the following:

1. We go to "Start" \u003d\u003e Parameters \u003d\u003e Update and Security \u003d\u003e Select "Restore" in the left column \u003d\u003e On the right go at the bottom and click on "Find out how to start updated with a clean installation of Windows" \u003d\u003e Choose through what Browser open the page and the instruction will open before you.

2. In the opening instructions, it will be described that with this kind of resetting the system all applications and settings are deleted. Also for reset in this way - you need access to the Internet, the order of 3GB will be downloaded. At the bottom, click on "download tool now"

3. Watch the downloaded file and agree with the license agreement by clicking on "accept";

4. Now select Save Personal Files or Delete them, then click "Start".

The tool jumps clean image of Windows. From Microsoft servers and install it on your computer.

How to return the computer to the original status from the boot menu

If Windows is not loaded on your computer, you can reset it from the download menu. This menu should be booting automatically if Windows for some reason is not loaded.

In "Selecting Action" Select "Troubleshooting"

Select "Return a computer to the original state."

These ways to return the computer to the initial state should be enough for you. If there are additions - Write comments! Good luck to you 🙂

vynesimozg.com.

Restoring Windows 10 System

Often the need for reinstalling Windows Due to the errors of the operating system. Or you need to reset all the computer settings in order to sell the device or convey to another person. But sometimes it is necessary to simply restore the correct operation of the computer after unsuccessful update, installation of drivers and programs. In the latest version of Windows, the developers have added many functions to facilitate such a process as the restoration of Windows 10 system.

Today we will analyze a few moments - how to delete all settings and personal data, correct the problem with starting, reinstall the system in the absence of an installation drive, or how to restore Windows 10.

Returning a computer in source

If you need to bring a computer or laptop to the initial view in which it was at the time of purchase - by analogy with a smartphone, you can complete the overall reset. Similar actions will delete personal files, programs, and also return installed applications.

Open the Windows 10 settings by clicking on the appropriate icon in the Start menu or notification panel.

We are interested in the Update and Security menu.

Next you need to click on the restoration

At the next stage, you will be offered either full deletion of all programs and data, or save personal files.

You can also do everything you need without logging into the system, just press the power icon, clamp the Shift key, and then click the reboot item.

Here we will be interested in the "Diagnostics" items, and after - "return to the original state."

This method is convenient because Windows is not required to reinstall Windows or some other media. However, if the computer is defective hard disk or the system itself is badly damaged, this method may not work.

Windows 10 recovery disk

You can also use Windows Recovery Disk, which will help to restore the system without difficulty, saving all the files, or return the system performance. This is done as follows.

We use the search and find the control panel

Click on recovery

Select the creation of a recovery disk

We put a tick and follow the instructions of the program. We will need a flash drive or other removable carrier, not less than 16 GB. Now we can quickly reinstall the system on our computer.

To do this, it is enough to boot from the flash drive, where, selecting "Diagnostics", you can use standard recovery tools.

Full image system

Unlike the previous way, Windows has a way to create a copy of the system data and settings. It is very convenient if you just finished clean reinstalling and setting up the operating system, you can save this image to then, in case of any other problems, roll back to this state.

To do this, go to the control panel (you can get from the search), select the File History menu.

At the bottom, click on the backup of the image image.

Upon completion of the recording of a copy to an external medium, you can easily roll back to this point, using the restoration menu features:

Today, we disassemble only a few ways to restore the computer's performance, or return to the state of the system just installed. In addition to the above methods, there are some more, but we will talk about them in the next article - how to create a recovery point in Windows 10.

voron-xak.ru.

How to return Windows 10 to the original status with the preservation of personal files and without

With Windows output 8, Microsoft operating system got two new options for recovery in case of malfunctions: the first one (Refresh) allows you to return the system to the original state without affecting the user's personal files, while the second version (reset) is the opposite of the first and reinstall the system Zero, deleting all user data.

A year after the appearance of the "eight", these functions moved to version 8.1. Of course, considering their demand, Refresh and Reset became part and new Windows 10, where, in contrast to the two previous versions, they are combined under one button. Nevertheless, both functions work in the same direction - i.e. You can either "refresh" the system by saving your files, or completely reinstall it with the removal of everything and everything.

In fact, in 10-ke there is another recovery option that is designed to return to previous version The operating system with which was updated to Windows 10, but we will talk about this feature another time.

Today you will learn how to reinstall Windows 10 while saving personal files; We also illustrate the reset process with deleting files and reinstalling the system. Both of these recovery options we will run from the operating system. And to help those of you, who does not load the system for any reason, will also be described and the method of returning to its original state with saving files using the recovery environment (you will need either the recovery disk, or installation carrierSo have it in mind).

So, proceed.

Returning a computer to the source status with the saving files

Open the "Parameters" application (see "5 ways to open the Options window in Windows 10) and go to" Update and Security "-\u003e Restore. In the "Return Computer To Source Status" section, click the Start button.

You will see a window with a choice of action. Since our goal is to "refresh" the system with the preservation of personal files, select the first option: "Save My Files".

Preparation will begin.

Next, the system will show the list of applications that will be lost in the recovery process. In our example, there is only a list Google Chrome.Since this is the only third-party program installed on the test machine.

On the next screen, you will see the consequences of this return option - carefully read and press "Reset".

The computer will reboot.

Then you will see the next phase of preparation, and after the return process itself will begin directly.

You may be interested: how to upgrade bios on motherboard MSI?

The process is not long, but its duration mainly depends on the speed of the computer, so take patience. When the first stage is completed, the computer will restart and the process of installing drivers, system components, and setting parameters will begin.

Then some more settings ...

... and your computer will be ready for use. The system will be as new, without previously installed programs (file with a list of applications remote during recovery, you will find on the desktop) and settings, but all your files will be untouched.

Returning a computer in source without saving files

Open the "Options" menu, go to "Update and Security" -\u003e "Restore", in the "Return Computer to Source" section, click "Start".

Select "Delete File All".

Note that, unlike the option with saving files, in this case, along with your files, programs and settings will also be deleted accounts users.

Click "Continue".

The computer will reboot and the return process will begin. All subsequent stages will be similar to the fact that they were described when performing a computer return to its original state with saving files, i.e. The main work system will make it without your help. Your participation will be required only at the very end to make some settings and create a new or enter the data of an already existing account.

Returning a computer to the original state without affecting personal files when the system does not load

Connect the system recovery disc or installation disk and run the system from it. (If you need, configure the download from removable media on your computer). If you do not have any other, take a flash drive and go to your friend to create a system recovery disk (your friend's computer should work under windows control 8, 8.1 or 10).

At the very beginning of the computer download when the Press Any key to Boot from ... message appears on the screen, press any key so that the download has been made from the previously connected disk.

After downloading, you will see the Windows Installation Screen. Select the desired language and click "Next".

Then click "System Restore."

Your next steps: "Diagnostics" ...

... "Return the computer to the original condition" ...

Choose your account.

If necessary, enter the password.

Click "Return to the original state."

That's all. I hope the article will help you.

Windowstips.ru.

How to return the computer to the original status (Windows 10) with the preservation of personal files?

The last "Operation" Windows 10 inherited from its predecessor in the form of the eighth version a unique recovery system. At the same time, let's say if problems arise with work, you can, so to, to refresh the "Operation" or to ensure that it will be restored to the standard factory state and look like after the first installation. How to return the computer to the original state of Windows 10, now will be reviewed. In theory, there should be no problems with conducting these processes. However, there are our nuances to be paid attention to.

Why do you need a return of Windows 10 to its original state?

As for the reasons why many users are trying to restore the system to a certain moment of its state, there may be quite a lot of them. Most often, this is due to violations in the work of Windows itself, excessive littering, when even optimizers do not cope, changed settings, when the user himself does not know how to put them in order or optimize, etc.

But if you talk exactly about the settings, it should be sorted out for a start, how to change them, and not hack from the shoulder. After all, with any return (with the exception of the standard method), user programs and applications upon completion of the process will simply be deleted from the computer.

How to return the computer to the original state of Windows 10: Recovery Options

So, what does Windows 10 offer us as tools to restore the system to a certain state? It is believed that in this version of Operations, there are at least four ways:

standard recovery with the removal of updates;
restoring with custom files saving;
recovery without saving user information;
return to the previous operating system.

If someone has already noticed, there is no option to restore the system from the control point, since the method that allows you to get a "clean" system, it is not. Therefore, he will not be considered. Similarly, it will not be considered and rollback to the previous version of the "Operations", on top of which "dozen" was installed. Again, we need after everything done to have Windows 10 on board.

The simplest way to restore if the system works incorrectly

First and most simple way System recovery can be called deleting all updates. Why do it? The problem is that some update packages very often cause conflicts in the system, which leads to its complete inoperability. Such a recovery method although it looks simple enough, but is very laborious, because updates will have to be deleted manually (and sometimes even look for those that caused failures).

Nevertheless, return the computer to the original state of Windows 10, this method can be. To do this, you need through the menu of programs and components that can be called from the submenit right click on the "Start" button to use the viewing section of the installed updates. To get rid of them entirely and completely, you will have to uninstall them manually. What is the saddest, allocate and delete them will not work immediately, so be patient. This method is not too good, however, in a sense, the system leads to the source view that it had after the initial installation. But it is better to use more efficient funds, especially since the system has not taken rid of errors in the considered case.

Restoring with preservation of personal data

To "refresh" the system, but to save personal data and files, you need to apply a method called Refresh. This method is widely applied to Windows 10, the license of which is official. For truncated or "crane" versions, this method may not work.

Yes, in some cases, the system can be requested and the official key for Windows 10, but in the case of saving user data it is extremely rare. Again, the requirement may appear in the case of an established informal assembly.

To activate the process through the parameters menu, we enter the update and security section in which the restoration line has the left. When entering the right, action options are displayed. Select the first string "Return the computer to the original state", press the process of activation button.

Here is the most important moment: The system will give a suggestion of actions where you need to select saving files. Next will be shown applications that will be deleted during the recovery process. We go further and press the reset button, after which the reboot and rollback will occur. Then follows the installation of the drivers and the formation of settings, after which the user will receive a "clean" system.

Restoration without information saving

In principle, you can get the system in such a state, as it was installed initially. In this case, neither user files nor the program nor the setup will be saved (in the first case, the file and settings are preserved).

We do all actions similar to the above described above, only when you select actions, select the complete deletion of all data. Note, the accounts will also disappear, and at the final stage of the rollback it may be necessary to make some settings, enter an account (or standard, or "account" of Microsoft) and the key for Windows 10.

Recovery when problems arise with system load

There is another way to restore the system, most commonly used in case of unexpected failures in operation. There are two options here, but for each of them the installation disk or flash drive will be required.

You can create them in advance, for example, using the installation utilities Media. Creation Tool, or just create and write the image of the system to an optical or USB carrier.

If the system is still somehow, but it works, you can use the recovery partition described above, but select the advanced parameters (the string below the standard rollback to the original state). Press the immediate reboot button and wait for the process activation.

If the system does not load at all, but windows screen 10 has the appearance of the black area with or without it without it, you will have to be directly downloaded from the disk. In any case, further actions are not different. Please note: incorrect download windows 10 may vary and the appearance of some messages indicating, for example, damage to the loader, the presence of errors on the hard disk, etc. In some cases, they will have to use fundamentally different measures.

After starting from the disk or flash drives, which in bIOS settings It is necessary to set as priority devices to download, select the preliminary parameters on the initial screen, and in the next window we use the installation button, but the recovery link (it is left at the bottom).

Next, select diagnostics, and then go directly to the recovery section, in which options with file security or full removal data. We choose what is needed at the moment, and follow further instructions. Again, when restoring Windows 10, the license can be requested in the event that custom data is reflected.

Possible drivers and ways to solve them

Now pay attention to another aspect. Suppose the system is recovered, the download of Windows 10 does not cause problems, but ... some devices are not recognized by the system or simply refuse to work due to the fact that they did not have the appropriate drivers.

As a rule, it concerns non-standard equipment, which is in the database windows drivers 10 is absent. Here you can go twofight: install the drivers from the original disk, which is supplied with the device, or (which is much easier) First install the automated package for update drivers, let's say Driver Booster.And then it is to use it to install the missing components. The second option looks more preferable because the program after initializing devices is referred directly to the official site of the manufacturer and finds there the most recent drivers.

Conclusion

As you can see, return the computer to the original state of Windows 10 is not so difficult. What method is preferred, the user is already solving himself. It all depends on the specific situation and the requirements imposed on the version of the system that you need to get, so to speak, at the output. However, the optimal solution, according to many, will be restored with the saving files, in which case accounts are also saved, and some basic settings. The option without data saving is useful in the case when the so-called "clean" installation is required. But the first and last options are mostly suitable for cases when unexpected failures in the system are observed.

How to open a register in windows 10

The Windows 10 operating system has been improved by Microsoft, compared with Windows 8 and earlier versions, on a number of indicators. One of these is the process of resetting Windows to the source state, which was significantly changed. More from the user who wants to reset the operating system into the base state, no disk or flash drive is required with it - all the necessary files are stored on the computer, and restore can be made directly from them.

Resort to rollback of the system to the original state should be in extreme cases when they did not allow to solve the problems arising. As part of this material, we suggest familiarizing yourself with the instructions, how to reset Windows 10 to the original state at various faults of the operating system. Also in the material provides information on what to do if problems arise when returning the PC to its original state.

How to reset Windows 10 from the system interface

If Windows 10 operating system runs on a computer, but for some reason, it was necessary to roll out it to the original state, it was fairly easy. Run the automatic reinstalling Windows 10 can be as follows:

After some time (depending on the volume of the hard disk on the computer), the system will delete all files or move some of them in (if the option with saving files) is selected. After that, the computer will restart and reinstall Windows 10. After some time, the computer will boot with a "clean" operating system.

If the computer system is not loaded, it is quite simple to reset it, but only when you have a predetermined boot flash drive or. If you are concerned about creating them to roll back the operating system to the initial state, it is enough to do the following:

During system rollback, the computer will reboot several times and it will be necessary to configure its base parameters.

When you try to reset the computer on Windows 10 to the original state, an error may occur that will not allow this to do. This problem arises due to the fact that the files required to restore the system are not detected on the computer. Reset Windows 10 to the source state occurs using files that are located in. If they have been removed in whole or in part, an error may appear that notifies that the problem occurred when the PC is returned to its original state.

In this case, you need to run, after which you write a command in it sFC / SCANNOW. And press ENTER. The computer will start checking the integrity of Windows files and the loading of the missing, if any.

Windows 10 includes one option Return the computer to its original state, Which quickly restores Windows, its configuration to factory default settings. Reset Windows 10 faster and more convenient than reinstalling Windows from scratch by using the installation disk or flash drive or using the system recovery partition for your device. During the recovery process, the system will ask whether to leave your personal folders and files.

Unlike the Dozens of Windows 8, there are two separate options:

Restoring a computer without deleting files;
Deleting all data and reinstall Windows.

But in fact, all these options work equally in both systems. And therefore I will show everything on windows examples 10, but which are completely similar to all processes in Windows 8. Let's find out what steps to make a system to reset Windows to the state "just installed" in Windows 10 and Windows 8.

What does it mean to "reset Windows 10"?

When using the function to reset Windows 10, Windows is reset to the default state. Those. If you purchased a computer with a pre-installed Windows 10 operating system, your computer will recover before this initial state as "after purchase". The installed software and drivers supplied with PC will be in a state as at the time of purchase PC.

If you installed Windows 10 yourself, then the Windows reset will mean rollback and recovery of the system to the most initial state immediately after its installation.

In each case, you can choose whether you want to save personal files or delete them. In this case, all installed applications, their parameters and system settings will be deleted. This ensures that you will receive a "clean" system. Any problems caused by third-party software manufacturers, the system fails caused by malicious programs Or user errors when setting up the system will be completely corrected. More precisely, they will simply stop exist on a "clean" system.

The reset process is very similar to the installation of Windows from scratch.

Steps when resetting Windows 10

Microsoft Windows Reset Process explains as follows:

Personal computer reboots in Windows Re - Windows Recovery Environment;
Windows Re erases and format existing partitions Windows before installing the new copy of Windows.
PC reboots to a new copy of Windows.

And when you select the folder and file saving option, before removal current system Windows, Windows Re scans hDD For personal folders and files. The found personal files she postponed, sets a new copy of Windows, and returns the files to where they were found.

How to perform a Windows 10 reset?

To reset the computer to factory settings on Windows 10, open Parametersthen select the section Update and securitythen go to category Restoration. To the right of pressing the button To begin.

If you choose Save my files, Windows will reset the system to the default state, deleting the installed applications and settings, but save your personal files. When choosing Delete everything Windows will delete everything, including your personal files.

Choosing an option Delete everything I advise just in case every time you make a backup of folders and files. Cases are different and the extra backup file archive has not yet prevented anyone, which can always be removed as unnecessary.

Reset the system from the boot menu

If your computer with Windows 8 or 10 is not loaded, you can reset it from the download parameter menu. This menu will appear automatically if Windows cannot boot normally.

Choose Troubleshooting And further Return the computer to the original state.

Then a familiar selection dialog will be shown to you: save or not save personal files.

Reset Windows 10 and get the system without additional software

Option Return the computer to the original state Very comfortable thing, but there is one problem: usually PC manufacturers, especially laptops, make a lot of branded software that is responsible for restoring the system, downloading the driver and advertising the manufacturer of iron. Even if you immediately after buying the system, all this garbage was demolished, then the reset of such a system will return all manufacturer's applications in the original state.

Fortunately, with last update V1607 for Windows 10 now contains an additional way to get a fresh system Microsoft Windows. 10. In the section Update and security, go to category Restoration and click on the link.

On the page New start with clean windows installation 10 there is a link to a free tool that is directly from your installed system Scars clean Windows 10 directly from the Microsoft server and installs it on your system. Required drivers will be automatically loaded from the center windows updatesAfter the system finishes the installation. If suddenly necessary driver Or the utilities in the Windows Update Center will not be found, you can find them on the manufacturer's website of your PC.

A new option to reset Windows is very useful for many users. Now you do not need to remember where the installation flash drive or disk with the operating system was lying. Literally for a couple of clicks now you can reinstall windows system And at the same time not to think about the time reservation of personal files.

The last "OPERATION" of Windows 10 inherited from its predecessor in the form of the eighth version of the unique at the same time, let's say if there are problems with work, you can, so to speak, refresh the "Operation" or to ensure that it will be restored to the standard factory state and look As after the first installation. How to return the computer to the original state of Windows 10, now will be reviewed. In theory, there should be no problems with conducting these processes. However, there are our nuances to be paid attention to.

Why do you need a return to the original state?

As for the reasons why many users are trying to a certain moment of its condition, there can be quite a lot of them. Most often, this is due to violations in the work of Windows itself, excessive littering, when even optimizers do not cope, changed settings, when the user himself does not know how to put them in order or optimize, etc.

How to return the computer to the original state of Windows 10: Recovery Options

So, what does Windows 10 offer us as tools to up to a certain state? It is believed that in this version of Operations, there are at least four ways:

standard recovery with the removal of updates;
restoring with custom files saving;
recovery without saving user information;
return to the previous operating system.

The simplest way to restore if the system works incorrectly

The first and easiest way to restore the system can be called deleting all updates. Why do it? The problem is that some update packages very often cause conflicts in the system, which leads to its complete inoperability. Such a recovery method although it looks simple enough, but is very laborious, because updates will have to be deleted manually (and sometimes even look for those that caused failures).

Restoring with preservation of personal data

To "refresh" the system, but to save and files, you need to apply a method called Refresh. This method is widely applied to Windows 10, the license of which is official. For truncated or "crane" versions, this method may not work.

Here is the most important point: the system will give a suggestion of actions where you need to select saving files. Next will be shown applications that will be deleted during the recovery process. We go further and press the reset button, after which the reboot and rollback will occur. Then follows the installation of the drivers and the formation of settings, after which the user will receive a "clean" system.

Restoration without information saving

Recovery when problems arise with system load

You can create them in advance, for example, using the Media Creation Tool installed utility, or simply create and write the system image to an optical or USB media.

If the system does not load at all, and the Windows 10 screen has the appearance of the black area with or without it, it will have to be directly loaded from the disk. In any case, further actions are not different. Please note: the incorrect download of Windows 10 may differ and the appearance of some messages indicating, for example, about the loader damage, the presence of hard disk errors, etc. In some cases, it will have to be used fundamentally different measures.

After starting from the disk or flash drives, which in the BIOS settings need to be set as priority devices to download, select the preliminary parameters on the initial screen, and in the next window we use the installation button, but the recovery link (it is left below).

Next, select the diagnostics, and then go directly to the recovery section, in which options with file security or full removal of data will be offered. We choose what is needed at the moment, and follow further instructions. Again, when restoring Windows 10, the license can be requested in the event that custom data is reflected.

Possible drivers and ways to solve them

Now pay attention to another aspect. Suppose the system recovered, loading does not cause, but ... some devices are not recognized by the system or simply refuse to work due to the fact that they did not have the appropriate drivers.

As a rule, it concerns non-standard equipment, which is missing in the Windows 10 driver database. You can do two ways: install the drivers from the original disk, which is supplied with the device, or (which is much easier) first install the automated package for the drivers update, say, Driver Booster, and then it is to use it to install the missing components. The second option looks more preferable because the program after initializing devices is referred directly to the official site of the manufacturer and finds there the most recent drivers.

Conclusion

In this manual on how to reset Windows 10 to factory settings, perform a reset, rollback to the original state, or, otherwise, automatic reinstalling Windows 10 on a computer or laptop. Make it became easier than in Windows 7 and even in 8, due to the fact that the way it has changed the way to reset the system in the system and in most cases you do not need a disk or flash drive in order to perform the described procedure. If for some reason everything is not described, you can simply perform.

Reset Windows 10 to its original state can be useful in cases where the system began to work incorrectly or not even starts, and to recover (on this topic:) in another way it does not work. At the same time, reinstalling the OS in such a way is possible with the preservation of your personal files (but without saving programs). Also, at the end of the instructions, you will find the video in which the described shown clearly. Note: Description of problems and errors while rollback Windows 10 to the original condition, as well as possible methods Their decisions are described in the last section of this article.

IN recent versions Windows 10 in the recovery parameters appeared new feature - « New start"(Previously called refresh windows tool), allowing you to perform automatic clean installation or reinstalling Windows 10 with saving files, but with deleting the pre-installed manufacturer programs. Its use allows you to reset when the first method does not work and reports errors.

Upon completion of the process (which may take a long time and depends on the performance of the computer, selected parameters and number of personal data while saving) you will get a fully reheasted and working Windows 10. After logging in, I also recommend pressing the Win + R keys to enter cleanmgr. Press ENTER, and then click on the "Clear System Files" button.

With high probability when cleaning hard Disc You can remove up to 20 GB of data left after the system reinstallation process.

How to Reset Windows 10 If the system does not start or reset from the parameters does not work

In cases where Windows 10 does not start or reset in parameters does not work, you can try to perform using the manufacturer's tools or with the recovery environment.

If Windows 10 does not start, but shows blue screen With an error, clicking on the "Advanced Parameters" item, you can get into the recovery environment. If the system starts, but it fails to reset the OS, go to the update and security options and click the Restart Now button in the "Special Download options".

After rebooting, go to the "Troubleshooting" section, and then click on the "Return the computer to the original state".

Save or delete private files. When you select "Delete", it is also proposed to either completely clean the disk without the possibility of their recovery, or a simple removal. Usually (if you do not give a laptop to someone), it is better to use a simple removal.
In the target operating system selection window, select Windows 10.
In the Return Computer to Source Status window, see what will be done - delete programs, reset the settings for default values \u200b\u200band automatically reinstalling Windows 10 click "Return to the original state".

After that, the process of resetting the system to the initial state will begin, during which the computer can reboot.

If licensed Windows 10 was preset on your device, then the easiest way to reset it to the factory settings is to use certain keys When you turn on the laptop or computer. Details about how it is done is written in the article (suitable for branded PCs with pre-installed OS).

Video instruction

The video below shows both ways to run the automatic reinstalling Windows 10 described in the article.

Windows 10 reset errors in factory status

First and most simple methodsWhen problems occur, when you reset Windows 10, the factory settings consist of the following steps:

Make sure system section disk (on disk c) enough free space. Ideally - 10 and more GB.
Delete all third-party antiviruses and other protection program before starting recovery.

If when you try to reset Windows 10 after rebooting, you saw the message "The problem when returning the PC to its original state. The change is not made, "usually talks about problems with the files needed for recovery (for example, if you did something with the WINSXS folder, from the files in which the reset occurs). You can try, but more often have to do (however, you can also save personal data).

The second option of errors - you are asked to insert a recovery disc or installation drive. Here, a solution to start a newly described in the second section of this guide was appeared. Also in this situation you can do (on the current computer or other, if this does not start) or the Windows 10 recovery disk with the inclusion system files. And use it as the required drive. Use windows version 10 with the same bit that is installed on the computer.

Another action option in the case of the request to provide a file drive - register your own image to restore the system (for this OS should work, actions are performed in it). No such method is not verified, but they write that it works (but only for the second case with an error):

After that, try again to start resetting the system to its original state. By the way, it can be recommended for the future that can greatly simplify the process of roll back to the previous state.

Well, if you have any questions about reinstalling Windows 10 or return system to the initial state - ask. Also remind you that for pre-installed systems, there are usually additional resetting methods for the factory settings provided by the manufacturer and described in the official instructions.