Inefon reboots in itself on the apple. Your iPhone or iPad suddenly turns off, even if charged? Here's how to fix it

Some iPhone users are often upset that iPhone is constantly rebooted after iOS updates 12 If this problem is repeated several times. What to do in this case? This appearance includes many cases, for example, constantly reboots on the apple, reboots in itself, restarts without stopping or end, restarts when charging / enable / restoring, cyclic reboot red screen, etc. In general, you first need to understand their reasons.

Possible reasons why iPhone constantly reboots:

1. Problems with firmware. Bugs and errors are often found in new IOS versions. In this case, you will have to wait for the official release of a new assembly with a bug solution or return the device to previous version iOS;

2. The battery resource is exhausted. In most cases, it is the outdated battery that causes a failure. If the phone reboots with any increase in the load on the CPU, replace the battery to the new one;

3. Breakfasts in the iPhone system board. They are a consequence of the fall of the gadget;

4. Emergency completion of the program. The phone starts a reboot when you work only with one specific program? Then we advise you to remove it from the device and reinstall again. If the problem is repeated, the device is incompatible with the iPhone.

What to do if iPhone reboots himself

What to do iPhone cyclic reboot after updating iOS 12?

With the help, one click is possible to get out of the cyclic reboot and restart the device for free.

Step 1: Download and arrange Tenorshare Reiboot on your computer. Connect the device to a computer using USB cables.

Step 2: If the Tenorshare Reiboot recognized your device, click the "Enable Mode" button and translate the iPhone / iPad to recovery mode.

Step 3: After a few minutes a button "Exit the recovery mode" will appear. Click this button and the problem is solved.

Not only, Tenorshare Reiboot is the most popular free IOS utility. Also allows you to correct problems, such as, etc. Perfectly compatible with iOS 12. This is best appwhich will allow iOS device Work as new.

How to fix "iPhone reboots and does not turn on after iOS 12"?

The previous way is the simplest. Of course, there are another way -.

To do this, you need to press the buttons at the same time. Home and meals And keep them until Apple's logo appears on the screen. Depending on the severity of the failure, the freezing picture can change the connection to iTunes icon and it means that a new version iOS, unfortunately, could not be installed correctly. In case the forced reboot, the problem cannot be corrected and it is necessary to restore the smartphone through iTunes.

How to solve the constant iPhone restart after updating iOS 12?

Via iTunes programscan restore the system through firmware rollback. Make it downgrade. Downgrade is a compulsory rollback operating systemto the version that is in backup Your phone data. If not, before restoring.

As can be seen, the cyclic reboot can be easily solved. Your gadget works as usual, and not erasing information using Tenorshare Reiboot. This program shares windows version And Mac, supports the last iPhone.

In the article, we consider the main reasons why the iPhone turns off by itself, which led to this and how to solve the problem now. The material is relevant for all models iPhone X / 8/7/6/5/4 and their modifications S and PLUS.

iPhone, this is the accessory that provides unlimited possibilities of communication, while being a stylish gadget that emphasizes the taste of the user. Daily people spend a lot of time, rewriting with each other, converating, furrowing spaces of the Internet.

Smartphone took in a person's life big place. The moreover, when the device gives failures when working. Serious malfunction - iPhone turns off spontaneously. During an important conversation or correspondence, the device can simply go out by providing many negative emotions. The reasons and methods to correct the trouble are several. Consider each separately.

Problems with battery

This is a popular, common reason. A malfunction may occur in several cases.

The phone fell, which led to the disconnection of the battery contacts. But this phenomenon is non-permanent. The fact is that the contacts are not broken, but simply discharged and now spontaneously change the situation. The smartphone can work fine, but as soon as the owner shakes it (pulling out of his pocket or somehow differently), then contacts iPhone battery Disappear with the power supply, which will turn off the device. The level of charge role does not play.
Non-original battery. This happens when when replacing the "native" battery establish cheaper Chinese counterparts. Capacity of these batteries can a priori be insufficient. But the phone will still work. Only during operations requiring high energy costs (Internet surfing through the included Wi-Fi and simultaneous conversation cellular line), the voltage jump will occur, and the battery capacity will fall at zero - the phone will turn off.
Faulty battery. Each battery has its own definite recharge limit, after which it begins to come into disrepair. Another situation when the iPhone is subjected to temperature drops - for a long time Arrives in a warm or cold environment.

How to fix

When the loop contacts fail, contact service center - good if the warranty on iPhone back Act. An independent unqualified solution to the problem is fraught with more disastrous consequences.

When an unoriginal battery is used, then the exit from the situation is simple - to change on the certified. Only to start you need to figure out the power that the phone consumes, and then purchase the corresponding battery.

When the battery is faulty or worked out, we do similarly to the previous way - we buy a suitable original battery. There is one here important moment. Replacing the battery on the iPhone - the process is not from the lungs. On the Internet you can find a lot of instructions on this topic. But in reality sometimes everything else. In addition to skills (or at least experience), the user will need a special tool. Its value varies. It is easier to immediately attribute the iPhone to those skilled in the art, who for a modest board will quickly change the battery.

Problems with the power controller

Apple smartphones are devices where everything is thoughtful. There is a special chip that controls the voltage incoming when charging. The phone battery is powered by the network alternating current, through a special adapter. Before entering the battery, the voltage passes through the power controller (the same chip). He plays the role of a barrier that does not allow damage the battery. When the voltage complies with the battery requirements, the charging goes, and when it is higher, then the chip is triggered, having a pulse to reach the battery.

If a iPhone turns off aloneThis may mean the breakage of the power controller. In this case, the operating system of the phone is trying to "protect" the battery from the voltage drops.

Method of repair

Create a situation forces only by the service center specialists. It will be necessary to replace the failed power controller. This process is associated with the work in the iPhone system board, where non-professional actions will result in complete dissent of the device.

Operating system errors

iPhone, like any modern device, has a variety of functions. One of them is direct interaction with the phone components. This is carried out by reading information from certain sensors. But not always this feature plays the owner's hand. Some software errors They lead to the fact that the iPhone turns off by itself with full charge.

How to Repair Situation

The first one is the easiest option - the full reboot of the device. To do this, you will need to simultaneously hold the on and "home" buttons. Hold them in this position follows at least 15 seconds. With a successful reboot, the manufacturer's logo appears on the display.

It happens that the charging indicator is faulty. It has already been noted that the system works with iron in complete symbiosis. There is an error at which, despite the fact that the battery is charged, the corresponding indicator shows "0". The system immediately reacts to it, turning off the phone. Fix the situation easily:

Fully discharge iPhone.
We leave it in this state for 2-3 hours.
Then connect the charging.
We charge to a 100% indicator.

Another way to cope with errors is the restoration of the operating system. The process is carried out through the iTunes program (it is from any user apple devices). After that, we get a fully "clean" gadget from the newest (from the available) operating system. Before restoring, in order to avoid loss important informationYou should make a backup of data in the same iTunes or save them on the ICloud cloud server.

Conflicting applications

There are applications that, when activated, enter the conflict with the operating system. This is caused by the incompatibility of the program and version of iOS.whose result is to turn off the device. Release from the situation two.

Update the operating system if available.
Delete a conflicting application.

Some programs require additional hard disk space. An example can serve as a photo editor that processes the image, retaining the result separately, not a touch of the original. When the memory is not enough, the system can react by turning off the phone. Exit: Release a hard disk space or use the application.

the iPhone may turn off due to a processor overload caused by a large number of simultaneously used programs. The component overheats and to protect its operating system gives a shutdown command.

Water getting

Water, along with dust - the main enemy of digital technology. If moisture gets inside the gadget, the device ceases to work correctly. It can manifest in that iPhone turns off by itself and turns on only with charging. In order not to ruin the device, you should contact the service center, where the iron is dried. It is not recommended to get rid of moisture inside the smartphone.

If your iPhone behaves strange: it turns off by itself, even with the remaining charge of 15% or 30%, then you should know that this is not news and you are not the only one who collided with a similar problem. Users reported this issue everywhere from the date of IOS 9. And even now, in 2016, many of them come across this problem.
If your iPhone is suddenly turned off, even if there is a sufficient charge in the battery, try the following recommendations to eliminate the problem:

1. Run hard hardware reset

Usually hard reset solves this problem. Hard reset is similar to the procedure: "And you tried to turn off and turn on the device again, but at a deeper level of the operating system. Usually reset occurs to factory values.

To perform hard reset your iPhone with a physical home button (any model iPhone. before iPhone 7), clamp and hold both buttons " Sleep / Wake"And" HOME"For 5 seconds. Smartphone iphone. It will restart, you will see the flashing Apple and iPhone logo icon will revive.

A very frequent problem that Apple gadget users are encountered when the iPhone turns on and off on charging. There are many reasons for which the iPhone begins to turn off and many of them you can eliminate yourself.

To solve the problem of inclusion, spontaneous reboot or fails to switch off at home, it is necessary to consider all possible causes of malfunction and methods for their repair.

IPhone turns on, but black screen

Conditionally the reasons for which the iPhone turns on and turns off on charging, performs spontaneous reboot, are divided into hardware and systemic. It is the failures of B. software Most often to blame for the fact that the iPhone immediately turns off. If your iPhone stopped turning on, you need to diagnose the device. When the cause of the breakdown is firmware, then you need to do the following:

connect charger
leave the phone at charging for 15-30 minutes
try enable smartphone
if the phone is turned on, restart it - click at the same time button Home. and Power button

If the reason that the iPhone turns on and immediately turns off, lies in the system failures, after forced reboot Devices on iPhone screen Appear "Apple" logo and starts download iOS.. Charge the phone completely and test. If the problem is repeated, look for another cause of fault.

Incorrect operation of a smartphone battery

If the iPhone turns on and immediately turns off or starts a spontaneous reboot and the off button does not respond to commands, probable reason This may be a battery malfunction. If you are using an iPhone for more than a year, then the loss of the battery capacity is quite natural and the problem will solve the problem of this part. When the iPhone is turned off almost new, then the battery breakdown is most likely caused by the following factors:

using a non-original charger - Despite the similarity of the charge devices of the original and Chinese production, they differ in the flow method, as a result of which the battery fails, so the iPhone begins to turn on and immediately turns off
regular voltage drops on the network - Using the original IPhone charging does not always guarantee the availability of the battery. With constant voltage drops on the network, the battery is premature, so the iPhone turns on and starts to go out or a notification appears on the screen that the device will soon discharge
moisture hit - If even a small amount of moisture, the battery fails, so the iPhone is turned off immediately, or when turned on it does not charge

Mechanical damage, falls and blows can also cause the iPhone to turn on and starts to disconnect. If the iPhone begins to turn on and disconnect, the charging icon is on the display all the time, it is recommended to make a device diagnostics.

"Apple" is constantly burning on the phone screen

A common situation is when the iPhone turns on, the charging indicator appears on the screen, after which it goes out and the Apple logo appears, or the notification that it will soon discharge. If immediately after switching on and turns off the iphone, most likely, the reason is the system failure when recovered from the backup. Solve this problem will help reboot the gadget and recovery from iTunes.

To do this, follow the following:

make sure the battery is charged and not discharge in the near future.
prepare a computer and a USB cable
synchronize iPhone with PC
turn off the iPhone by holding the Home button and the POWER button
hold the power button and wait when iTunes application logo appears on the screen
release the power button and run the recovery mode on the computer

After the recovery is complete, the iPhone immediately turns off. Check the iPhone and wait for it to be complete. Then press and hold the power button for some time and, if necessary, reboot the device. If it did not help solve the problem, and still after switching on the iPhone immediately turns off, the professional diagnosis of iPhone is required.

It turns on the iPhone due to the unstable source of charging

If the phone does not charge or starts to turn on, but immediately turns off, the reason for this may be an unstable IPhone charging source. If the iPhone is done in the garage, the car, in the country, it affects the performance of the device, since the supply of electricity in such places is unstable. To prevent the phone breakdown, follow the following recommendations:

if the iPhone is regularly disconnected and turns on, make the device diagnostics
charge your smartphone only in places where current is stable
do not use charging from other phones.
try not to use car chargers

The phone stopped turning on due to hardware faults

If the iPhone stopped turning on when charging is connected after impact or fall, possible cause It is a breakdown of one of the components of the phone. In this case, the charging indicator is on the screen, the POWER button responds to commands, but the phone does not work correctly. To find out if it is necessary to do professional diagnosis Devices.

The main components affecting the work of the phone are as follows:

motherboard - due to malfunction motherboard The phone is turned on, then the screen starts to go out and the device is turned off
charging controller - if you can not connect the charger due to the fact that the plug is not fully income, make the charging controller diagnostics. Perhaps the smartphone ceased to turn on because of it
pOWER button - If the contact button is oxidized, sooner or later the phone is turned off and no longer turns on. In this case, mandatory diagnosis and repair
the accumulator loop - when the loop connects the battery with the microcham, charging iPhone. happened incorrectly, so it is periodically disconnected and turns on spontaneously

If the iPhone stopped charged, it turns off periodically and turns on due to hardware faults, the repair itself is not recommended. Diagnostics and replacement of defective parts of the gadget should be carried out using professional equipment.

Consider a rare, but very unpleasant situation when the iPhone restarts itself during standby mode or in active mode. Moreover, the device model is not important. At the very end of the article, we will tell how to cope with the situation.

How to find out because of which the iPhone itself reboots

IN recent versions IOS operating system Added the ability to register events. If you translate into familiar terms, then all events in the system are recorded. If your device begins to work unstable, you can use this log. With it, it is quite simple to calculate the problem area if the reason for the shutdown is a program failure.

The activation record of the function or application will always always go before recording an emergency disconnection. If there is no write record, then the reason for the shutdown lies in the hardware failure and you need to contact the service center, because Without the intervention of repair engineers can not do.

If the phone spontaneously turns off or during call iPhone. reboots, then the likelihood is that accumulator battery Loses contact with the device. Speaking easier, the battery moves away from contacts. This is due to the fact that with long-term use of the device there is a small backlash (gap between the connecting elements) of the battery lid.
When talking or active use, the housing is excised, which causes the disconnection of the contacts. To check, take the phone and sharply shake it several times. If shutdown occurred, then the reason is detected.
If the root cause is not in this, then trace the statistics. Perhaps when you call, when you start a specific function or application or simply, when loading an iPhone is rebooted, then the most likely program failure.
If the structure of the operating system arose failures or the application is not tested for full compatibility with the device, then when activated, sharp interruptions are possible in operation as a spontaneous disconnection or reboot. In order to avoid (and for solving) such problems, we recommend producing permanent updates Software products and use only certified applications.

As practice shows, if the firmware update or resetting the settings to the factory in the iPhone, it is possible to solve the problem with a reboot only with the help of qualified assistance to the wizard of the service center.