Removing Windows 7 password. An easy way to reset the password account of any version of Windows! How the password is reset

Password reset in Windows 7 / Windows 8 A typical problem facing system Administrator. Often boot disk Livecd S. special program will help to cope with the problem forgot passwordBut suppose you did not have it. It turns out that the password can be reset staffing Recovery. The method is tested on Windows 7 and Windows 8.

We will act according to the following algorithm:

1. Get access to the command prompt with administrator rights

To gain access to the command line with rights windows administrator 7, load from the boot disk or system recovery disk, then drive part of the registry (bush) in which you specify Windows start command line (cmd.exe) immediately after windows rebootsto the user password input window

1.1 Loading from the Windows 7 boot disk (Windows 8) or system recovery disk. (If we use LiveCD, then immediately go to paragraph 1.3)

1.2 If you use the boot windows disk 7, then in the selection window language parameters Click: Further ---> System Restore ---> Further ---> Command line

1.3 In the command line are gaining regedit.. The registry editor opens.

1.4 Upload the section (bush) HKEY_LOCAL_MACHINE. Allocate HKEY_LOCAL_MACHINE, then in the menu File ---> Load bush

1.5 Open File C: \\ Windows \\ System32 \\ Config \\ System

1.6 We enter any name of the loaded bush (XXX - in the example)

1.7 Go to section HKEY_LOCAL_MACHINE \\ XXX \\ SETUP

Then click twice by parameter:

- CmdlineIntroduce cmd.exe. ---> OK

- SETUPTYPE., replace 0 on 2 ---> OK

1.8 Select section xxx in HKEY_LOCAL_MACHINE, then File ---> Unload bush

1.9 We close the registry editor and the command line, get the boot disk (recovery disk) and click on the recovery window.

Go to the second part of the password recovery:

2. Reset Windows 7 password (Windows 8), creating a new Windows 7 user from the command line

After rebooting Windows, the command line window opens (cmd.exe)

2.1 Reset password from the command line.

To display a list of all users in the Windows 7 system (Windows 8), type the command net User.(without parameters).

To reset the password on the command line, we write: net user_sername new_pall

on the picture from above, we reset the user password admin1 To the new password: password223322.

2.2 Creating a new user in windows system 7 (Windows 8) from the command line:

Create a Windows 7 User Account with Administrator Rights

For Russian windows version 7:

nET Localgroup Administrators user_name / Add

For the English version of Windows 7:
nET User username password / add
nET Localgroup Administrators user_name / add

to remove the user from the group Administrators We use the "/ delete" key:

nET Localgroup Administrators user_name / Delete

Good day Dear blog readers, today I want to tell how to create blood flash drive To reset the administrator password in Windows. Earlier, I told how to create a diskette for resetting a forgotten password administrator in Windows, now let's talk about creating a special boot flash drive. We will create it using the RUFUS utility and Passware Windows KEYENTERPRISE 11.

To create a loading flash drive, download the rufus utility link above, Passware WindowsKey Enterprise11 can be . The program itself is packed in iSO. form. With this program, you can reset the password on Windows operating systems starting from 2000, exceptive 80 .

Running the RUFUS utility choose removable drive (USB flash drive)

Run the Passware Windows Key Enterprise Password Reset Program To do this, you need to goi , Using the F2 key or Delete and in boot section Select the "Upload from USB, press the F10 and ENTER key. When you first start the program will determine the disc on which the operating system is installed.

To continue at the bottom of the window, press 1. At the next step, you must specify the user to which you want to reset the password.

Selecting the user at the bottom of the window, press the Y key (agree) to reset the password. I confirm the reset of the password y and at the bottom of the OKAN press the n key

Remove the USB flash drive, reboot the PC and enter the system.

If you need to immediately set a new password, then click on the "My Computer" icon and select "Management". In the window that opens, select "Local Users" - "Users",

select the right mouse button on it and click on "Set Password"

Question from the user

Hello!

On my laptop, the son sat and not much "played" ... as it turned out, put a password on Windows (I have Windows 10 installed). Now I can not turn on the laptop, and he forgot his password ...

Help, I can not enter the system at all. Now have to contact the service?

Hello.

The usual phenomenon, many often simply forget their password. To solve this question, you will need a flash drive. (Even enough for 1 GB) and working computer to record Live CD on her (Perhaps you have another laptop, or use the computer neighbors, acquaintances, relatives).

Actually, in this article in detail and step by step by step by all actions to reset the password when entering Windows. In principle, if you are not familiar with the PC, then you can deal with everything yourself, without contacting the service center. So...

How to reset even administrator password in Windows 7/8/10

1) tool selection

Methods of liquidation of password protection in Windows are quite a lot. There are options using an installation flash drive with Windows through replacing files (But in many new builds, this is no longer working), There are various cunning registry editors (But again, in this case you need to understand well and be in the subject), and there are universal tools in the form of Live CD (one of them and will recommend below).

This is about Lazesoft Recover My Password

Advantages of the utility:

it allows you to drop a password in all popular versions of Windows: 2000, XP, 2003, Vista, 7, 8, 10 (32/64 BITS);
supports file Systems NTFS, FAT32, FAT;
supports hard drives (IDE, SCSI, SATA, 1394, USB, SAS, RAID DRIVERS);
supports GPT discs;
supports UEFI and BIOS;
it can be written on CD / DVD / USB-Flash / USB-HDD, etc. Media;
the program weighs only ~ 30 MB, so it is quite downloaded even with a slow or limited internet connection;
well, the main thing: when working with it, you will not need to work with the command line, understand the code, or do something complicated - the program is designed for novice users!

2) Creating a loading emergency flash drive

I lower the download and installation of the utility (they are standard and will figure it out with them ...).

After starting the utility - click on the "Burn Bootable CD / USB DISK" button.

REMARK! I note that by choosing the option "Windows 10 64 Bits", quietly used a flash drive and to remove passwords in Windows 7/8 (i.e., a flash drive, in fact, it turns out universal). However, I admit that with some versions of the OS may not pass ...

Select OS for which I will relieve the password (important! I have a similar emergency flash drive working on all versions of the OS, regardless of what I chose ...).

After 3-5 minutes. The flash drive will be ready (pay attention to the message if all OK will see "The Recovery Disc Is Now Ready" as on the screen below).

Now you need to connect a flash drive to that computer, where you have forgotten the password from Windows, and boot from it. To do this, use either the boot menu (Boot Menu) or go to bIOS settings (UEFI) and change the priority of loading.

REMARK! These topics are quite extensive, and if you do not imagine what is even talking about, I recommend to get acquainted with these articles (there I tried to explain how and what to do).

How to enter the BIOS (UEFI) on the computer, laptop -

How to configure BIOS to download from a flash drive or disk (CD / DVD / USB) -

Most often, the F2 and DEL buttons are used to enter the BIOS (UEFI) (it's best to press a few times and immediately after turning on the computer). In the BIOS (UEFI) you need to open a boot menu (boot menu). Often the download section is simply called "Boot".

In the boot menu, you must specify the drive from which you want to boot (Focus on the name, flash drives are usually something like "Kingston ...", "transcend ...", etc.).

4) dump directly the password itself

After downloading from the flash drive, you will automatically open a window with a reset (Reset Password Windows, see screen below). Just click the "Next" button.

If you have such a window, it has not appeared (or accidentally closed it), click on Start / Lazesoft Recovery My Password (as in the photo below).

If suddenly the window of the auto-launch was not ...

Next, you must specify your Windows OS. In general, if you have one Windows OS installed - then the program itself will automatically select it (if you have several OS on the disk - then you need to manually specify the required).

In the next step, you must see users who are registered in the selected Windows. You need to select the account for which you want to delete the password.

By the way, the utility also shows which of the accounts is the administrator.

The last step: you need to click on the "Reset | Unlock" button (Reset / Unlock).

RESET / UNLOCK - press the button

If the operation is successfully completed, you will see a small window with the "The Password Reset SuccessFully" message. An example is presented below.

After that restart the computer / laptop and try entering your account.

Almost probably, if you did everything similarly to the advice above - you can easily enter your account, because Password protection has been disabled / unlocked.

Generally, this method A fairly simple, universal and affordable for beginner users.

If the password was from the account windows records

Some users have a password problem not connected with a local account in Windows, and with Microsoft account ( note: When installing the Windows 10 system, it is proposed to immediately create your account on the Internet).

To restore access to it, you must first open the official site Microsoft - (You can do it from any tablet, computer, laptop - not necessarily with the one on which the password forgot).

After that, you will need to specify your e-mail and enter the check code from the picture. After some time, instructions for restoring access to your account must come to your electro-mail.

That's all, all success!

Creating a password for an administrator account in Windows - a reliable way to protect personal data stored on a computer from other users. However, passwords are often lost or forgotten. To restore or reset, you can either reinstall the operating system or try to restore access to the account using special means.

Attention! In Windows, the protection of personal data from unwanted encroachments is responsible for security account manager (SAM), characterized by high reliability and resistance. Therefore, hack the password, especially if it is difficult, almost impossible.

Ways to restore password to enter Windows 7

You can restore the administrator password in Windows 7 using:

boot DVD Disc or flash drives with windows 7;
eRD COMMANDER programs.
offline NT Password and Registry Editor utilities.

Restore access to the account using the boot disk

To reset the administrator password this way you will need installation disk (USB flash drive) with Windows 7. At the same time, the system assembly must be exactly such as on the computer.

The renewings process will look like this:

First of all, it is necessary to achieve that during the start of the OS first read information from the installation disk, and then from the hard one. To do this, during the restart of the computer, press DEL. BIOS entry button different manufacturers Motherboards may differ (F2, F12, etc.).
Hitting the main window base system I / O, go to the Advanced Bios Features section and opposite the first Boot Device. Exhibit the drive installed on the PC (CDROM). After that, we save the changes made.
In the DVD-ROM, install the boot disk with Windows and make the restart of the computer.
In the initial installation window, you do not need to change anything, since these parameters are used when installing Windows.
In the next window, select the "system restoration".
After scanning the media for availability installed systems The corresponding window will be displayed with search results. If the old OS is found, click "Next", if not, then you use the disk not with that option to build Windows.
In the recovery parameters window, select the "Command Line".
After entering the REGEDIT command opens windows registry. The SAM database is located in the HKEY_LOGICAL_MACHINE registry catalog. We find this branch and perform "loading a bush" through the drop-down menu.
Following in specified path, We are looking for a SYSTEM file and open it.
The program will ask for a name created section. The name can be chosen any.
In the created directory, we find the CMDLINE file and assign the value of cmd.exe, and the SETUPTYPE file is 2.
After making changes, the created bush can be unloaded.
After restarting the system, a command line will appear in which the Net Users "administrator name" "New password" should be prescribed.

Password reset using ERD COMMANDER

ERD Commander - free programallowing you to reanimate Windows in many cases (computer blocking with viruses, loss of the password from the administrator account, random erase of important data, etc.).

Before you start running a password reset operation (restore), you need to download this utility and mount the loading flash drive or disk from it. You should also change the sequence of reading information in the BIOS. How this is done, described above.

By completing the presets, you can proceed directly to the recovery of the administrator password:

Use OFFLINE NT Password and Registry Editor utility

This program is being revealed by the graphical interface, but this does not affect its operation and efficiency. The procedure for resetting the administrator password will be as follows:

Download the utility, make a bootable flash drive from it and set the priority reading in the BIOS to the USB Flash.
Insert the USB flash drive into the appropriate connector and restart the PC.
After loading the program in the first window, we do not change anything. Click Enter.
In the second window choose system section Windows (1, 2, etc.). Here you should focus on the volume of carriers.
Specify the path to the SAM folder. The standard path is prescribed automatically, so just press ENTER.
Then click "1", thereby choosing a password reset procedure.

Working every day for a personal computer, we remember and introduce dozens of passwords. It may be codes for games or mailbox, entrance to OS and many other data you need to keep in your head. If you went on vacation, and returning in a month, suddenly discovered, then you forgot the password from your computer, then this article is for you. So, on your PC installed Windows 7. How to reset the administrator password?

Safety

First of all, think about how well you are well versed in computers. If you are only able to run a PC and open a browser / solitaire, then believe me, you better not climb "in the debt" and provide business to professionals. Any damage that you will apply a computer or laptop will automatically cancel its warranty, and in case of a more serious breakage, you can be able to refuse free service. Also note that if you are going to spend a hacking computer, it is criminalized, so everything you do is happening for your fear and risk.

The simplest method

Suppose you have a Windows 7 running. How to reset the administrator password? In some cases, the following option helps. You need to turn off the PC from the network. Then you should develop the lid system Block. On the motherboard You need to find a battery-tablet and remove it for a few seconds, and then put it back. What will it give? Many temporary settings will reset personal computer, such as time, date. Internet can disappear, password on BIOS and user accounts. Unfortunately, this method It works not always, but physical penetration into the subsoil of the computer is 100% the option in which the warranty is canceled.

Installation disk

If the previous method did not help you or you decide not to use it, then reset the Windows 7 administrator password on the laptop will help you the installation disk with the operating system. The fact is that, according to the logic of Microsoft, if you have such a disk, then you are a programmer. Therefore, when you have advanced rights to manage. So, there are two ways for Windows 7. How to reset the administrator password? Read more.

In any Windows operating system, especially at home computers, there is a hidden recording of the administrator, which does not have a password by default. Our task is to connect to it and already from there edit other "accounts" and passwords to them. The first way may be such.

Insert the installation disk to the computer, when you turn on to install the OS.
On the first screen, press the SHIFT + F10 combination to enable the command prompt.
Run the registry command Regedit.
In the HKEY_LOCAL_MACHINE section, select "Unload bush" in the menu and specify the path to the SAM file - / Windows / System32 / Config. We prescribe any name created branches.
In the "bush" that appears, we find SAM / DOMAINS / Account / Users / 000001F4. We need to fix the key F.
Double-click on it, and we will open the table of memory cells. In line 0038, in the first column, you need to change the value 11 -\u003e 10.
More nothing is touching, we leave and save.
We highlight our "bush" in the HKEY_LOCAL_MACHINE branch and select "File" - "unload bush". I confirm.

Now you can restart the computer, pulling the installation disk before that. You had to appear an administrator account, entering which, you can edit any passwords on accounts.

Cunning

This is the second way to "crack" Windows 7. How to reset the administrator password, having the installation disk on the hands? To do this, repeat the first two items described in the previous method. Only instead of entering the registry we do the following.

We hope you remember, on which disk you have an operating system. If not, we enter the "DIR C: \\" command. You will appear table with folders on the disk. If you saw Windows among them, then this is what we need.
Now we need to copy the file - "Copy C: \\ Windows \\ System32 \\ SETHC.EXE C: \\".
Create another that opens the command line instead - "Copy C: \\ Windows \\ System32 \\ Cmd.exe C: \\ Windows \\ System32 \\ SETHC.EXE".
Now reboot your computer. In the user selection menu, when you need to enter a password, quickly and many times press the "Ctrl / Alt / Shift" keys.
According to the idea, the function was to be engaged but due to the fact that we changed the code in the file, the command line will start.
Enter the command "Net User" username new_pall.

Thus, we will be able to change the password at any time. This method is good in that once changed specified fileYou can no longer use the installation disk. But what if you did not have it initially? How to reset the Windows 7 administrator password without a disk?

Third-party utility

Usually the sellers of computers and laptops do not supplies discs with operating systems. We overpay for buying a computer with pre-installed "Windows", but do not give the disc into our hands. What to do? There is another way to reset the Windows administrator password. A program that allows this is called Offline NT Password and Registry Editor. To use it to write down the image on a CD or USB media.

In order to windows 7 through a USB flash drive, first make sure your computer supports loading from an external medium. You can do this by going to BIOS and checking (changing) the order of loading media.

First boot from your flash drive with the installed program.
You will arise the control menu. You can see the table in which the partitions of the disks with their dimensions will be indicated. For them, you need to determine what place the OS is installed.
Indicate the disk number.
We enter the path to the sam file. Usually it is "X: / Windows / System32 / Config".
Enter "1" to reset the password.
Print "1" to select account management. Before us will appear a sign with user names and their RID identifiers.
Choose the required account. To do this, enter either the username or identifier in 0x format.
Improve "1" again. This will completely reset the password for the account. Specifying "2", you can change current password on new.
We enter the sequence "q" -enter- "y" -enter- "n" -enter. So we will complete the work and save the changes.
Alt + Ctrl + Del to reboot.
You can enter the account you need.

Outcome

This article is intended for advanced users who are not confused at the form of a black window and the absence of a mouse cursor. Most of the methods described here are simple in development, since all the interfaces are understandable to anyone who can carefully read and know English. It is also worth noting that they are intended exclusively for working with home computers, because it uses those data that only the owner can know. Hacking other people's laptops and PCs are prosecuted by law, even if it was an innocent joke in relation to a friend.