Yota modem external antenna. What an antenna for the Internet from iota is better

In this article we will tell you how to connect an external antenna to Yota modem.

Navigation

Today, there is a special LTE modem Yota with connectors for connecting an external antenna. As a rule, there are no more than two to be connected to an antenna with two or one input. The device is connected to the antenna through the pigtail as well as before the Samsung SWC-U200 modem.

Standard modem Yota.

It was created for WiMAX antenna users, which connected to samsung device SWC-U200. It allows you to quickly switch between WiMAX and LTE. By the way, for this, only the device and pigtail must be changed.

By the way, today there is a lot of information on the Internet about the possibility of putting out the old Samsung connector, or at all the Pigtail sprinkle in the modem connectors. Remember that you can do it with your hands, and this suggests that you do not have to get the same as a result as that person who provided the instruction. But we will talk about ready-made versions.

3G / 4G LTE modem ZTE MF820D with Yota SIM card

This modem works great with the Yota network and fully complies with its standards. Magna modem - ZTE. Accordingly, no one blocked him, and it can work with all operators.

Advantages:

• Universality. Thanks to its features, the device can work with any SIM card
• High sensitivity to signal perception
• The presence of two separated antennas at an angle of 90 degrees
• Support for networking standards Yota
• Lack of web interface company. In this case, management is used through the standard Modem menu.
• Mark is not officially supported by Yota

The biggest advantage of the device is that it can work with different network standards, that is, with 3G and 4G. So, if the subscriber leaves the Yota maintenance zone, then it can insert a sim card of another operator and quietly use the Internet on.

If you want, then when you buy it, you can be invested in the symbol of Yota.

Internet Center Gemtek Yota CPE

This device is multifunctional and can work as an LTE modem, router, wireless internet access points. In addition, he has two ports for IP telephony and two connector for the local network. The router was certified from Yota.

Features of the equipment:

• You can connect an external antenna
• Built LTE modem
• There is a module for connecting to Wi-Fi. And connect to it can up to 250 computers having a function n
• Two ports Lan.
• Two ports for connecting a stationary phone
• Opportunity remote control

Street Box for installing LTE modem and router

It is often happening when the signal level at the network is not as far from the location of the router and the computer. For example, when the office is high or vice versa low, the signal in it will be bad, and on the street the modem will perform its functions just excellent.

Here you will help the kit specifically for the street. It can be installed at a distance of a hundred meters from the nearest socket. Then the signal and power will be transmitted only through one cable.

The kit includes:

• Street boxing with fasteners
• Gromber
• Power kit
• Kit for fixing the modem and router
• USB cable
• Outputs for connecting antenna

Features of operation:

• Accommodation outside at a distance of a hundred meters
• Connect antenna with two connectors
• Compatibility S. different models Routers
• Compatibility with any USB modem that does not have an outlet without antenna

Yota Router, LTE Router - Draytek VFL-200

This is already improved equipment from Yota. The router already has a firmware that supports many modem modems. The router has a special Yota icon, which makes it possible to hope that new versions will be supported by the company.

The device has a built-in professional program that makes it possible to set up operation modes. You can change NAT on MTU, create several separate local networks, restrict access to some users or just new and so on.

Features of operation:

• Yota company icon, ability to work with different modem models
• Several modes of operation, such as: Nat, Dyndns and Port Forwarding
• Remote access to device management
• Ability to create a backup access channel
• Enhanced Wi-Fi signal

The redundancy function may be required when connected wired Internet and operational switching from one service provider to another, and with the help of remote control you can safely follow all devices at once from one computer.

In addition, the router is already configured to work with Yota LTE, but configure additional services You will have to either refer to the specialists.

Video: How to connect an external antenna to Yota modem?

Many users who acquired a mobile 4g-bond, have already noticed that the market does not particularly induce the buyer with accessories for LTE devices. It is especially felt by the lack of an assortment in the antennas market to enhance the portable modem signal. However, with a detailed study of products in the corporate segment, it is found that the necessary devices are on sale, here only their cost several times higher than a worthy 4G-modem.

The focus of this article is a system for amplifying a signal produced by Yota. Antenna is presented on the market with several modifications that are present in different price segments. The reader has the opportunity to get acquainted with interesting products, learn their technical characteristics, and also find out how can be created from undergraduate funds portable system To enhance the signal.

Market leader

Undoubtedly, among all producer products there is a model that is awarded the title "Best Purchase". Yota (Antenna) Connect 2.0 is considered a sales leader in the domestic market, because the manufacturer managed to combine the set in one device useful features. First, we are talking about mobility - the portable antenna has not only small sizes, but also a folding design, allowing the user to transport the device in a backpack or bag with a laptop.

Convenience of connection also not left unnoticed owners. For the LTE modem on the antenna housing there is a special USB slot to which you need to connect a mobile network device. But the modem is connected to a laptop or computer by an extension agent, which already comes from the signal amplification system.

For everything you have to pay

It would seem that the Yota antenna with a built-in modem has no flaws - buy a set and enjoy broadband Internet. However, in their reviews, users express dissatisfaction with the fact that the signal amplifier works only with the same device. That is, it is impossible to buy such a convenient and portable antenna for other modems (ZTE, MTC, etc.), since the gadget will not work at the hardware level.

The way out of the current situation, of course, is. The USB receiver on the antenna can be disassembled and neatly a soldering iron liquidate the Yota controller. After that, it is necessary to connect the wire with a copper cable to the controller with the antenna housing. True, the signal power after chip seizures deteriorates, but such a solution is still better than the use of a modem without an amplifier.

Directional action system

Ethernet wireless antennas have lost their relevance in the past decade, because many providers are easier to stretch the cable at a distance of 30-60 kilometers, rather than selling expensive equipment aimed. But facing the LTE poor coating, the manufacturer had to take advantage of the forgotten technologies. Yota with the strange title Hite Grid copes perfectly with the signal amplification, being from the tower at a distance of 20 kilometers.

Yes, such a device is considered stationary, as it is dimensional and cumbersome, and the design is not suitable for transportation. But here you can already decide the user that it is more important to him - a decent transfer rate or convenience. A feature of such an antenna is the fact that there is no binding to the provider or the manufacturer of 4G modems.

Above, faster, stronger

But the parabolic systems did not fit in the domestic market. The thing is that Russian-speaking buyers are able to notice the difference between the satellite signal and the 4G network work in which the Yota modem works. External antenna, made in the form of a plate, undoubtedly attracts attention external speciesBut when it comes to the quality of the signal, the device surprise a user with nothing.

Antennas of aimed action in the form of parabolic plates are offered by the Baltic, Polish and chinese manufacturers. Externally, they are almost identical and differ only in the diameter of the disk and the title. On the domestic market, only the Sky Flex brand can be recommended from the domestic market, which is able to demonstrate the signal amplification. When buying, it is necessary to pay attention to the fact that the company's logo is not in the form of a sticker, but painted on a plate. On the S. table serial number The inscription Sky Flex Yota is duplicated by print.

FEATURES OF MONTAGE

All antennas aimed action has one unpleasant feature - the high-frequency cable from the receiver to the modem is very expensive. It is not difficult to guess that all owners of the Yota gadget is the connection of the antenna installed on the roof of the house will cost weekly. You can solve the problem with the acquisition of additional accessories to the signal amplification system.

If the Pigtail communication cord is used to connect the modem, you can install the modem (securing and protecting and protecting from moisture) directly on the antenna housing. And connect to a mobile device or computer to provide active (10-30 meters). Alternatively, many users will use in the form of an extension.

Alternative to folk craftsmen

Many users assure in their reviews that they are used homemade antenna For Yota. With your own hands to create a device, they made the manufacturer himself, who set the overestimated price for its products. The role of the directional system can play a regular television antenna, known in the people as Polish. To do this, disassemble the modem and disrupting the wires from the built-in amplifier, connect them to the television antenna terminals.

In fact, it is possible to replace the Yota accessory (antenna) by any girlfriend that can enhance the signal. Even a regular piece of reinforcement or copper cable will suit the antenna. The only thing you need to know the owner is the principle of the receiver and contour, which should not have a chain.

From the subwoofers

The usual tin can or colander will fit as an alternative to an antenna of aimed action can be collected in several ways: using the active contour and on the principle of direct visibility. Most. simple decision In extreme conditions for any owner mobile device And the modem can be the use of a conventional aluminum container from carbonated water or beer. The bank is washed, it is cut off with a knife and modem, connected by uSB interface, fixed in the opening on the reverse side.

An advanced system using an active circuit requires the owner to disassemble the modem and output two wires from the built-in amplifier. Also, the designer will need an empty pack of cigarettes, a nail or large cross section. It is necessary to break through the cigarette pack and secure on a metal hat one end of the cable derived from the amplifier. The second cable is connected to the circuit contour. The pack must be inserted into the jar so that the metal does not come into contact with the circuit's contour. Such a simple mechanism can take a 4G signal even at a distance of 20-30 kilometers.

Finally

As practice shows, options to solve the problem with amplification of the signal for the LTE device a lot. People with unlimited financial opportunities will suit the solution from the manufacturer Yota. The antenna will cope with all the tasks and will provide the owner of high-quality communication. Do not get upset and users who have a limited budget - to make a directional antenna from the primary means is very easy, only small knowledge of electrical engineering and desire are needed.

There are situations when the speed of the Internet does not satisfy the needs of customers. In this case, it is worth thinking about how to strengthen the Yota signal. But before you think about whether the Yota signal is needed in one way or another at first, attention should be paid to the following factors:

• presence in the premises;
• distance station;
• weather;
• network stability;
• speed \u200b\u200bdrops;
• the number of devices used.

If nothing of the listed manifests itself, it is not required to strengthen anything. Otherwise, you need to decide how to strengthen the signal. Basically, the amplifier is required for the 4G LU150 modem.

In that case, if the Yota signal level is low required to use an external antenna, which will help increase the modem signal and make it more stable. To increase the signal level Yota in an effective way The use of antennas is considered. But there are situations when it is enough to place the connected iota modem on the street.

You can buy an amplifier in the communication salon. Branded equipment for these purposes is worth a rather big money and not always such a sum is available from subscribers. If you have to purchase an amplifier, it can be done with your own hands. Especially since this can be performed from the primary means. The enhancement of the Yota signal made by its own hands is much more efficient acquired in the store.

Strengthening the signal with your own hands

Antenna for Yota can be made of the following items:

• pans;
• aluminum pelvis;
• foil;
• beer cans.

Before proceeding directly to creating an amplifier, you need to prepare the following tools:

• screwdriver Set;
• soldering iron;
• adhesive pistol.

In order for the external antenna for the modem from Yota, it justifies the hopes for its construction, it is necessary to have a high-frequency antenna cable, a copper wire, a plastic tube. Another one an important point Which worth knowing is the frequency of broadcasting and the scheme of how to connect the antenna to the Yota modem. Information on how to connect an antenna directly to the device on the Internet is a lot.

The most effective is considered to be made by your own hands antenna for LTE Yota from Kharchenko. It is the eight made of copper wire that needs to be attached to the reflector. Making the eight must be clearly withstanding its size. The disadvantage is only the fact that in this case you will need to attach the cable to the connector that is located on the housing. If there is no such connector, you will need to solder the cable to the inner board. As for the advantages, its signal amplifier for the Yota modem can be placed at high altitude, which will help to enhance the reception of the signal even more.

Antenna Yota can be made from an old unnecessary pan with a capacity of about three liters. In addition, an aluminum basin or a cardboard box, which must be preloaded by foil can be used. In the center is a modem. If there is a need to change the orientation of the Yota 4G modem inside the reflector to the desired indicators. You do not need to be soldered in this case. The device is fastened with an adhesive pistol or girlfriend.

Another option to design an amplifier is the use of aluminum can. She needs to cut up, and make a side sloping retreating 40 cm from the bottom. Place a modem in it and connect an external antenna to a computer. To check the indicators you need to go to the page, which is located at 10.0.0.1., And perform testing.

Now you know how to enhance the 4G modem signal and can easily and quickly use one of the methods described above to obtain the maximum Internet connection speed from iota.

Exterioryota antenna - a simple solution to a big problem

The Yota amplifier, as you can guess from the name, is nothing more than an external (installed outside the housing) receiving-transmitting module, made in the form of a street or room antenna, compatible with the modem and routers manufactured under the Yota brand. It assumes the functions of their regular low-power antennas, increasing the integrity and data transfer rate.

Wireless Internet from Yota is such a thing ... often it does not reach the speeds promised by the operator. It is not surprising that the Yota amplifiers enjoy the population with such great demand, which is not just remained unchanged over the years - it is steadily increasing. After all, for many, the amplification of the Yota signal has become a real "headache" - a problem that is seen intractable.

However, exactly until they percade the electronic store site, where you can always buy an antenna for Yota, and not just buy, but this is the most profitable price in the city! The solution of many years of Internet problems, as practice shows, probably not take you not only much time, but also money. Not so serious was this problem if you figure it out ...

How not to make a mistake with the choice of antennaYota.

However, it is not necessary to assume that it will be able to allow it absolutely any antenna for Yota, which you purchased on the occasion of the subway. Such purchases are rare when it turns out to be successful, and therefore you do not need to lay great hopes on them ..

What do we mean by the word "good"? This is such an amplifier for Yota, which will be equally efficient and in the city feature, where the neighboring buildings are closed by radiation of base stations, and beyond where basic stations greatly removed. Problems with the use of wireless Internet arise everywhere, but you no longer need to worry about them - they don't touch you now!

Having preferred an electronic store site, you are guaranteed to get an effective amplifier of the Yota signal, since others are simply not in our assortment. All you have to do is to determine the technical characteristics that directly depend on technical characteristics You use the Yota device (modem or router).

Objective signs of a good antenna foroTA

Not least materials from which are produced by our amplifiers for Yota have not latter. External antenna, even if it is used in the room, and if in the open space - so in particular, should be made of high-quality weather-resistant, but at the same time do not create interference materials. Otherwise, the Yota amplifier is not that will not provide due efficiency, but will not work for a long time.

Distinctive features forYota.LTE

External antennas designed to enhance the Yota LTE signal (Yota 4G) have become widely demanded relatively recently. The wireless networks of the fourth generation, which came to the major cities of Russia, did not fully, because of which many subscribers were not able to enjoy the traffic and stability of the Connect.

According to its design and the principle of the antenna, the Yota LTE is no different from the antennas intended for use in the networks of previous generations. The difference lies in the data standards supported by it, which are more demanding and to the receiving, and the radiative antenna capabilities, as well as in technologies and devices developed under them.

However, in the same measure as the external antenna Yota, it concerns cable products and connectors used to attach it to the same names and routers. LTE amplifier for YOTA, if it has been connected using low-quality cables and connectors, can lose up to 15% of the received and transmitted signals, thereby crossing all the advantages of its use ...

About the harm low prices on antennasYota 4.G.

But back directly to the Yota LTE signal amplifier. All of them are developed taking into account the most modern achievements in the field wireless communication And therefore no complaints are called. Developed by many companies from the USA, China and some other countries, because for LTE, if you believe international experts, the future, and for its commercial use - a big benefit!

The situation spoil small producers, who, wanting to make it easier to reduce their products (including Yota LTE antennas), use absolutely unusable materials that are capable of any, even the most brilliant project to turn into a "non-viable freak". Examples of this - thousands. Their lion is made up of Chinese-made antennas, intended for use in conjunction with USB modems.

External antennas for Yota (to enhance the signal of the said operator) are presented in Russia very widely. Buy the Yota 4G amplifier today is not a problem, it is in another - in his choice! The latter is quite difficult to the innumerable manifold of trademarks, among which are extremely little trustworthy. Often the buyer has to choose between bad and ... bad, in our opinion it is unacceptable.

Amplifier for modemYota at a bargain price

Fortunately, you are on the website of the electronic store site, whose clients who have decided to purchase one or another device for Yota (signal amplifier, for example), do not face similar problems. The Yota LTE external antenna bought here will certainly be summarized by providing perfect reception and data transfer regardless of the remoteness from the base station.

However, this is not the only strong side of our antennas to strengthen the 4G Yota signal, - their favorable value also worries many, attracting all new and new buyers to the site. Precisely profitable, but not understated; This, let me notice, not the same thing! With cheap, incomprehensible to whom the antennas we do not have, and you do not advise you!

The same antennas for enhancing Yota LTE, which you can see in the catalog of this site, are sold at the best prices in Moscow, which we rightly call profitable! These antennas were not accidental here - they are made of high-quality metal alloys and modern polymers, with the strictest compliance with the requirements of the LTE standard and the global standards associated with it.

Strengthening the modem signalYota technologyMimo.

A separate word deserve antennas that support MultiPle Input Multiple Output technology (MIMO) that have recently appeared in the external device line for Yota. Mimo-antennas are characterized by a more complete use of the bandwidth-provided capacity provided by the LTE standard, which has become possible due to the separation of the receiving-transmitting device into two parts - accepting and transmitting.

The MIMO compliant Internet signal amplifier for Yota is thus not one, but as many as two antennas that need to be installed so that they do not interfere with each other, creating frequency correlations. Such antennas for the LTE modem Yota provide at least twice the best data transfer rate, and this is no change in the level of standards.

Today, the MIMO signal amplifier for the modem Yota stands the best solution Problems when using the Radio Frequency Communication Channels of the LTE standard. Its disadvantage, and then small, it is considered only the need to set two antennas instead of one, but it is successfully eliminated by the use of frequency selectivity technology (by connecting these antennas in one case).

Your choice - antenna and modem (router) in one set

Antenna for 4G modem Yota, like an antenna for another popular Yota-device - Router, you can buy from us not only separately from the modem itself (router), but also with it. After all, the electronic store site sells not only a variety of antennas, but also other devices designed to work in wireless network Operator Yota, as well as accessories for them.

Buying a Yota-modem with an antenna is, without any doubt, the right decision. Antenna, you will have to purchase anyway - not now, so then, having spent annal amount of time on her selection of the modem characteristics, which is not at all as easy as it may seem at first. It is better to do this in advance by buying a modem of the Yota operator with an antenna in a set! So, by the way, not only more convenient, but also cheaper.

Note - Antennas with the built-in Yota modem from us are also sold. Such antennas are predominantly indoor (intended for operation in rooms with normal humidity and temperature); They are optimal for use with laptops and tablet computers, at home, at work, outside the city, on the road - no restrictions!

Sale Antennas for ModemYota and not only

We are engaged not only by selling, but also by installing Yota antennas. This service is one of our most popular: it took advantage of more than 80% of those who have bought these very antennas at one time. Considering how well the specialists of the electronic store site are dealt with Yota's devices, the installation of the antennas does not seem such a challenging task for them.

Here you need to clarify that they are far from always with each other compatible - modem Yota and external antenna. Many modems of this brand, as well as many of its own routers, do not have connectors for connecting such antennas at all, which pushes their owners to experiment with the soldering iron. How can all this turn into? In addition to losing guarantee on the device, nothing ...

With us you can not only purchase modems and routers, but also modify them by adding the possibility of joining the external Yota antennas. Buy alarm amplifier and not to be able to connect it to the modem - this is, of course, unpleasant, but not so much to spoil yourself. Just contact us, and we will eliminate this annoying error of modem manufacturers.

The Internet is the necessity for modern man. Many people will not even be able to present their lives without access to high-speed Internet. Yota is a modern provider that offers its customers the most favorable conditions. This operator you can easily find the tariff that is suitable for you at the cost and speed of the connection. Some people think that by connecting the modem, they will be able to provide an Internet huge apartment. In this case, an external antenna is required for the Yota modem. It will help to make a signal strong, thanks to which the coverage area will increase.

At the official level, ETA does not recommend users to additionally install antennas to their modems. But if the connection speed is still needed, you can use some tips. If you follow clearly according to the instructions, you can increase the data transfer rate, reception quality. With the help of modern antennas, you can strengthen the Internet signal to a radius to 15 kilometers. This allows you to speed up the connection to the network, to provide each user a stable and high-speed connection.

Before installing the device, check whether the external antenna is suitable for 4G modem Yota. Not all antennas are working with the provision of this operator. cellular communication. For this before buying, consult with the seller. If you do not want to risk, take advantage of third-party companies. Many organizations are ready to assist you for small fee. The specialist will definitely configure you high-speed Internet access quickly.

Some users still want to try their own strength and try to connect the antenna on their own. Sometimes their actions do not bring any result - the data transfer rate does not change, and the money for the purchase of components is already spent. The reason may be a suitable device, incorrect installation software Or incorrect installation with your own hands. Because of this, we recommend using the help of a specialist.

How to use a signal reflector?

Accelerate the Internet and increase the coverage area will help Internet signal amplifiers. These are devices that take over the Internet and distribute it over long distances. You can buy the device at any electronics store. Consider that the use of not all devices will help you really increase the connection speed. Many of them do not show any result, despite the high cost. The signal reflector works like this:

• Insert the gadget to the YUSB modem connector from Yota.
• Prepare an antenna setting slot.
• Through the extension, connect the cable to a personal computer.

Antenna must be installed directly near the data transmitter so that it can more actively distribute the signal. Despite the application of manufacturers, the powerful improvement in communication does not give the device. Improvements from the use of antenna is not at all better installation Conventional tin cans or colander. Because of this, the antenna for iota modem 4G is lowly popular.

Connect the external antenna to the modem through the contactless adapter

Strengthen the signal using the antenna is not always possible. The method is suitable only to those devices that Yusb connector. If it is not, then you can not use the way. To increase the data transfer rate on a modem without yusb ports, you can use non-contact adapters. They work like this:

1. Install the antenna on the street. Expose it as high as possible, the direction does not matter.
2. In the high-frequency cable, connect the antenna to the adapter, which comes in the kit.
3. Modem and computer attach each other through the USB extension.
4. Inside the antenna adapter, install the modem from iota.

If you have the slightest knowledge in the technique, you will manage to connect the device. Consider that it is impossible to guarantee an increase in the speed and zone of the Internet coverage in this way. Many gadgets are ordinary pacifiers intended for pumping money. They can reduce data transfer. If you need a high speed of the Internet, change tariff plan. So you are guaranteed to get an increase to the 4G LTE speed.