Mercury Cl 200 Synchronization by base station.

Mercury CL-200 Wireless - Barcode Wireless Scanner, which can work at a distance of up to 100 meters from the base. The model is perfect for use in places where access to the marked goods is complicated. A large range of reading allows you to save time and make the operator's work more comfortable. Usb HID, RS232, KB and USB Emulation RS interfaces are used to connect the equipment. The housing is made of plastic stamps resistant. The scanner can fall on a concrete floor from a height to 1.5 m and maintained performance. Use the image reading technology of barcodes. In response to the device, users note high fault tolerance and reliability.

General Description Mercury CL 200 Wireless

Mercury Cl-200 Wireless is a photocker that works on wireless data transmission technology. The device is suitable for use on trading cash nodes, in warehouses and in other places where freedom of movement is needed with a scanner in hand. The database is up to 100 meters.

Mercury CL-200 Wireless is distinguished by the universality of the connection. The scanner can work with various types of warehouse and commercial specialized software. Connection options for the device - USB HID, RS-232 and Emulation RS.

Specifications:

1. Radiation source: red diode.
2. Scan range: up to 30 cm.
3. Read speed: 270 scan / s.
4. Scan Remote: up to 100 m.
5. Minimum barcode contrast: 35%.
6. Battery: 1620 mAh (up to 60,000 scanning).
7. Mass: 165
8. Dimensions: 190x60x40 mm.
9. Temperature for work: - 0-50 ° C.
10. Warranty 12 months.

Features and dignity

Mercury CL-200 Wireless is a manual photolineic scanner with high accuracy of scanning. The device has built-in technology that provides high quality Scanning and convenience of work. Also, the device is characterized by increased impact resistance. Due to the reliable material of the case, the fall is withstanding from a height to 1.7 meters to a solid surface without damage. The scanner uses quartz glass, which is resistant to scratches. Ergonomic design makes work with a pleasant and comfortable apparatus.

Mercury CL-200 Wireless takes pictures with a mini-camera.

Image processing occurs on special algorithms. There are no moving parts in the apparatus, which is an undoubted plus. This ensures high operator speed. Also scanner is resistant to mechanical damage. Due to the high resolution, the device reads damaged bar codes even at low light illumination.

Assembly

The device consists of 2 main parts - a block and scanner connected to the equipment. Two parts are connected on a steady automatically customizable radio channel, which is protected from interference and data interference. This eliminates the distortion of the information transmitted from the scanner into the information system.

The housing is made of durable and practical plastic. It has an ergonomic shape. The hand when working with the device remains in the natural position, so does not get tired. This is particularly relevant for places where the scanner must be used often and intensively. Weigh the device for only 165 g, which also has a positive effect on the comfort of working with it.

It feeds on Mercury CL-200 Wireless from the built-in battery. One charge is enough to scan 60,000. Full charge is performed in 3-4 hours.

Outcome

Mercury CL-200 Wireless - Wireless Multi-Interface Image Scanner. Has a lot of advantages:

• high speed and accuracy of reading;
• reliability (even damaged or small code scans);
• versatility (recognizes codes applied to glass and plastic, rounded surfaces);
• works at a considerable distance from the base;
• gives freedom to the operator (read even in the case when the surface with the code is at an angle to the working surface of the device);
• shockproof plastic;
• wireless technology.

Mercury CL-200 Wireless has high resistance to mechanical damage, modern design, can be used in many areas.

Mercury Cl-200 barcode scanner (wireless) It is intended primarily to read barcodes located at a distance from the working computer or POS system.

Mercury CL-200 scanner. Wireless technology

Instead of the traditional wire connecting the scanner itself with a working computer, this model has a USB receiver that transmits the read data in real time. The available range of the scanner from the receiver is up to 100 meters, depending on the presence of walls, barriers and interference. In case of loss of communication with the computer, the scanner will emit a characteristic beep.

The battery charge of the scanner scanner from USB is about 4 hours. Battery capacity is enough for 60,000 scans. To save the charge, you can configure the transition of the scanner into sleep mode after 10 or 30 minutes of inactivity.

Mercury CL-200. Scope of application

The Mercury CL-200 scanner (wireless) will be convenient for use in warehouses where large packaging of goods do not allow them to be brought to a stationary scanner, and also have such dimensions in which manual wired models will create inconvenience.

Also wireless technology It will be convenient in stores selling large goods, for example:

• furniture;
• household appliances;
• building materials.

Barcode scanner Mercury CL-200. The advantages of the model

This scanner model, as well as the remaining models from this manufacturer, is made of strong plastic, withstanding significant blows and falls.

The scanner itself reads the barcode at a distance of 30 cm from them. At the same time, it recognizes all the popular types of their types (only about 20 types of one-dimensional barcode).

Barcode scanner Mercury CL-200. Specifications

Wireless linear Mercury-CL-200-R barcode scanner is made of high-quality plastic. The maximum distance from the base is 100 m in direct visibility, with partitions 40 - 60 m. Available in several modifications, interface - RS-232, USB with RS-232, kV emulation. Maximum scan speed of 270 scans per second. The scanner works with all common commodity programs. The Mercury-CL-200-R scanner can read all types of barcodes and not even the highest quality printed with minimal contrast from 35%. The scanner weighs only 247 grams, so when working, the hand does not get tired at all. Power is carried out from the built-in battery. One charge is enough for 60,000 scans. And the full charge takes about 4 hours.

Mercury CL-200-R Wireless Scanner - Features:

• Operates at a distance of up to 100 m;


• Scanning speed 270 scans per second;


• Wireless Linear Mercury-CL-200-R barcode scanner has a large selection of interfaces;


• Minimum lines width 0.1 m;


• Recognition of codes to a distance of up to 30 cm;


• Reads all types of barcodes;


• Charging takes no more than 4 hours;


• Works with software 1C and Frontol.

Buy Mercury CL-200-R Wireless Scanner

Universal scanner - the barcode of the Mercury-CL-200-R code is perfect for both the warehouse and to work at the checkout. It works with almost all popular programs, and the main thing is available in various modifications. If you need to choose equipment or help in store automation or warehouse, then contact our specialists!