How to reinstall Mac OS on MacBook about. How to reinstall OS X or MacOS Recovery

Watch the IMAC or MacBook purchase, but for many years got used to the specifics and functionality of the Windows operating system? Worried how quickly will be able to get used in the Mac OS environment? And maybe just want to explore the operating system from Apple? For these purposes, it is not necessary to dive into the thick debris of the specifics of the installation on PC Hakintosh, if you are familiar at least with Aza Vmware Workstation. This hypervisor is the most simple way Launch Mac OS in Windows. For him, the network has ready-made virtual machines (VM) with an installed and configured system from Apple. How to test Mac OS Sierra or High Sierra on VMware?

1. Ready MAC VM for hypervisors

The finished VMs save us from the mass of the trouble with which we are forced to encounter when installing Macintosh on ordinary PCs and laptops. Do not need to be installed clover bootloader or chameleon, look for kekkers and special files Type FakeSMC, set the emulation of components. No need to wait until the system is established. All these troubles took over the collectors of the VM. We get a ready-made virtual computer with already integrated guest OS add-ons and a user profile, which can be renamed or deleted if desired by creating another.

Since Mac is officially prohibited to install on ordinary PCs and laptops, naturally, test assemblies of the operating system in the format of working files of hypervisors will not find on apple official resources. But find them on the torrent trackers of the Internet.

VM S. installed MAC. - It is essentially the same Khakintosh devices. Lawyers and sofa experts in the subject may occasionally discuss the existence of an offense in terms of using Macintosh on hypervisors, but technical side The question is nothing to do. Working with a hypervisor, us, alas, you will have to face with the problems of the functioning of the virtual OS, and with the problems of Khakintosh devices as it: the absence of the smoothness of the interface effects, periodic brakes idle due to the lack of drivers separate functions or specific equipment, etc. For VM with Mac, there are the same processors restrictions as for Khakintosh - you need a computer on intel database, preferably with support for SSE4.2.

Ready VMs exist for both VirtualBox, and for VMware. The latter are more convenient to work with virtual Mac: In Vmware products, guest OS supplements are steadily working, and we will be able to configure common folders With the main Windows, as well as the screen resolution you need.

2. Sierra or High Sierra

At the time of writing a network, there are ready-made VM with current Mac OS:

Sierra (10.12) - version of 09/20/2016;

High Sierra (10.13) - version of 09/25/2017.

And, perhaps, there is already a VM with the most recent version of Mojave (10.14). But it is Sierra that is considered the most stable version suitable for experiments on the PC. It is the VM Mac OS Sierra that we download and configure to work with VMware. And then fix it in the snapshot and update to High Sierra through the App Store.

3. Downloading VM

To download VM Mac OS Sierra files for VMware, go to Rutracker:

https://rutracker.org/forum/viewtopic.php?t\u003d5287454.

We add distribution to the torrent client, and so far it will download the archive with the VM, we will do some operation directly with the VMware hypervisor. In the description of the distribution, in the column "Tablet", click on the link "Version VMWare 11 and above". If, of course, you have an actual version of the hypervisor above the 11th. Today, the last is the 14th.

4. VMware Unlock for Mac Support

By clicking on the link in the Torrent Distribution Description, download a certain archive with the name "unlocker210". This is an unlocker VMware to support Mac OS. The fact is that VMware products initially do not provide for Macintosh support as a guest OS. Actually, this unlocker210 is needed to solve this issue. Unpack the downloaded archive, we find the file-install.cmd file in the folder and launch it (important) on behalf of the administrator.

Now VMware is among the maintenance of the guest OS will be able to offer us Mac OS - any, right up to the latest version 10.14.

5. Unpacking and setting up VM

Loaded by torrent archive unpack using Total Commander or 7-Zip archiver.

Indicate the unpacking path, it is the way of storing VM files.

If the latest version of VMware is used, we update the VM.

Click "Change this virtual machine", then "ready."

Now we go to the settings of VM.

We need a section "Equipment". In the "Memory" tab set the volume random access memory 2 GB If the computer allows you to select more, allocate.

(1 estimates)

Some manufactured for Windows ProgramsThere are no analogues on OS X. In this case, you need to install an additional OS to a computer. Regarding Apple laptops There are two main options: Using the dedicated disk partition through the Boot Camp utility and the creation virtual machine. Next step by step we describe the installation of Windows on MacBook each of the designated methods, select their advantages and disadvantages.

Selection of installation option

The first method of using an additional operating system is offered by OS X developers and is standard. BOOT CAMP technology - installing Windows On a specially dedicated section. Switching between OS is performed at the time of restarting or turning on the laptop. The tool is embedded in MacBook, so it is not necessary to pay for additional software.

To the advantages of using Boot Camp include:

High performance computer. All hardware resources are given to the operation of one operating system.
No need to search for a special program, as well as its purchase. Boot Camp is free and comes in the standard OS X package.
Apple certified technology. There is a custom support.

A lot of disk space is needed to select a large disk space. Apple developers recommend not less than 64 GB, optimally - 128 GB.
To switch between systems, a PC restart is required.
There is no possibility of parallel use OS X and Windows.

The second Windows installation method on MacBook is virtualization. He implies launch Windows Inside OS X. In other words, Microsoft Operations opens as an application.

No need to allocate a separate section hard disk.
The size of the space allocated under Windows varies dynamically.
To go to the second OS, it is not required to restart the laptop.
The virtual machine is easy to copy, move or delete.
It is possible to install several additional operating systems at once, such as Windows and Linux.

Little performance. Computer resources are highlighted for opening two OS.
There is no possibility to download Windows when working with demanding programs or games.
Virtualization programs require license purchases. Free is only VirtualBox, which is inferior to the functionality of paid counterparts.

It's important to know

Presented positive I. negative sides Will help determine the method. If the second system is needed to run games or complex graphic editorsThe preference should be given to the method using Boot Camp. The use of conventional application programs (for example, office or accounting) is best implemented through the creation of a virtual machine.

How to install Windows on Mac via Boot Camp

The latest OS X versions have a built-in tool for installation windows on the selected section of the drive. Find Boot Camp will work in the "Programs" menu, the "Utilities" section or via Spotlight. Before starting the procedure, you will need to download the image of the operating system and allocate a flash drive with a memory volume of at least 8 GB. Also on a laptop disk should be enough free space to create a new partition.

By performing preparatory actions, you can start the main part of the procedure:

This procedure completed. The Boot Camp icon will appear in the system tray, after clicking the right button you can open the settings and set the work parameters touchpad, choose the default system and so on.

Installing one operating system in parallel with the other is standard practice in the computer sphere. You can install both Mac OS on a Windows computer and vice versa. On our information portal you will find instructions for a computer. The following are detailed steps with which you will receive an answer to the question: How to install Windows on Mac?

Possible methods

To install the OS, you will not need special skills or professional assistance. Installing Windows 7 or 10 on Mac is carried out in the following ways:

through ;
parlelLel Desktop program;
built-in Bootcamp utility.
We will analyze every case.

Using an emulator

To install Windows on MacBook in this way, you need to download the free Virtual Box utility and install it. After that, follow the steps according to the instructions:

run the virtual box;
click the "Create" button;
select the type and version of the operating system;
determine the size of RAM, which will be allocated to the use of the OS via the virtual machine;
next click on the "Create a new Virtual hDD»;
select the type of virtual disk and volume;
next, click the Run button;
after the installation is completed, you can install Windows on Mac and use it.

How to install Windows on MacBook Air or Pro?

For the second method, the Parallels Desktop utility will be required. After downloading the program on Mac, stick to the leadership below:

run the program;
click the File button and select NEW in the context menu;
next, click Install;
select the installation source (image with the operating system);
click "Continue";
in a new window, enter the activation key software;
enter the name of the virtual machine and select Location;
click "Continue" to start the installation.

You can use how free trial version, so I. complete version Parallela Desktop. For normal use of the software, the standard version is enough.

How to install Windows 10 on Mac via Boot Camp?

Using Bootcamp, Windows will be able to use all MAC resources per maximum, so this option It is considered the most profitable and optimal. IN recent versions Mac Os. this program Installed by default. Run the utility after closing everything running applications and open files:

put the ticks opposite the items "Upload Last ..." and "Install or delete Windows 7 or Newer";
click "Continue";
next, select one of the items: make a copy of the support to the disk or save to the outer medium;
next, set out the volume of the hard disk that will be used for windows. For normal operation of software, 20-30GB is enough;
wait for the end of copying files, after which Mac will restart automatically;
during the reboot, press the Alt button to appear with the OS selection window;
select the Window section;
now wait for the final installation and configure the parameters.

Now you know how to install Windows 7, 8 or 10 on MacBook or IMAC. All described instructions are suitable for any OS, starting with "seven" and newer.

Installation features

After installation, you may have compatibility and drivers. To fix it, you must upload the drivers in advance to the flash drive to then install on the clean OS.

Reading time: 34 min

MacBook is a laptop released apple company With Mac OS. The problem is that the numerous software was designed for Windows, and the same content on Mac is not possible. The only solution is to establish Windows on MacBook.

Preparation and installation of Bootcamp

Install Windows on MacBook will help the BootCamp utility, it loads OS on a separate section hard disk. So, before putting the second OS, you need to remember that it takes a considerable number of space. Check for free space - because it will be required somewhere 30 GB.

To start setting the OS, you need to check the BootCamp program for updates to make it necessary:

The application has a support site, go and see if there are updates.
Either the utility can be updated by themselves, open the Apple menu and go to the "Update ..." section.
After completing the update, you need to make a backup.

Windows installation on MacBook

When loading the program, you need to select a location where Windows will be saved on MacBook Air.. All open applications must be closed before running the utility.

When everything is ready, start:

We go to the poppy menu and open the "programs", after "service ..." and open the "Boot Camp Assistant". Click "Continue".

Select the "Download Last Up" and "Install Windows" checkmark.
A window will be displayed with a proposal to make a copy of software on DVD, CD or save on external disk. Choose what you need.
We download the drivers on the USB flash drive, after which you select the disc volume for the installed software.

Upon completion of copying all data, the laptop will automatically restart. To appear the download manager, clamp the alt key. The disk menu will appear, mark the OS title section. After that, there will be a launch of the operating system and configuring the interface.

Configure the system for yourself, everything starts with the selection of the interface language, and after the preparatory stage of the setting, click "Next". It is necessary to follow the instructions and everything will turn out, the main thing is to remember - it is impossible to interrupt and complete the laptop.

Windows 10 on MacBook via Bootcamp using a flash drive

Windows 10 on MacBook Pro. You can download both from the disk and the USB drive. To install from the flash drive, you will have to make a loading flash drive. As it was written above, check the utility on the update and save everything you need.

Drive drive in USB. We go through the "disk utility".
Click on the left side of the USB flash drive and replacing the "current" to "section 1" in the table.
We put the MS-DOS (FAT) format and click "Parameters".
In the winding window, we go through the "main loading ..." and confirm the actions by pressing on "OK" and "apply".
Open the "disc partition" and clean the space for the OS.
We enter the tab "Assistant Boot Camp".
We put, ticks on the proposed actions and click "continue."
Copy the files from the system. If a yellow triangle is highlighted, then the OS asks to enter the code, enter it.
Select the disk for installation, after which the system itself is restarted, while restarting, clamp the ALT key, so open the parameter window. After their configuration, the application is ready for use.

This utility allows you to upload Windows without restarting the computer.

How to use the program:

Open the File menu in the utility, then click New.
A window appears by clicking on the "Install Windows or Another OS ..." label.
Indicate the data installation source. We do, dragging the folder in the required place, or the application will do it yourself.
We click "Continue", after which we write the password of the OS.
The table is highlighted, we choose in it how to use the OS.
Click to the folder where the program will be and its name.
Click "Continue", after which the operating system is installed. At the end, restart the laptop.

MacBook Air Windows 10 using VirtualBox

This program will help to work at once by two OS. Install another OS with its help is simple enough. We go to the site of developers, load and install the utility, after which the PCM on the application label and choose "Create". Next you need:

The table is highlighted in which you choose the necessary OS.
Select the size of the memory that we have, preferably not less than 10,24mb.
Next, we put a tick opposite "Create a new virtual disk".
Select the type of file "VDI (VirtualBox Disc Image)".
Click on the "Fixed Virtual Disk" and indicate the volume.
The menu on the left will highlight the system icon. Click "Run", the "Parameters" window opens windows settings" After installing all OS parameters, you can use.

It happens, there is a problem with sound or video view after installing the OS, but there is a solution - you need to download all the drivers, they were saved in advance on the flash drive or disk. Reboot the program and now everything works.

If you have questions about "How to install Windows on MacBook?", You can ask them in the comment.

Many Mac owners often have a need for operating windows system. One is needed to launch your favorite games, the second is for the work of specialized software, and the third is just for a variety.

We decided to remind you how to properly and quickly make the installation of Windows 10 on Mac, so as not to contact virtual machines and similar solutions that do not allow you to work stably in Windows and squeeze the maximum of the capabilities of the computer.

On which Mac computers can install Windows 10

Officially 64-bit Windows 10 HOME or PRO using the Boot Camp utility can be set to the following models:

MacBook Pro / Air (2012 and newer)
MacBook (2015 and newer)
iMAC / Mac Mini (2012 and newer)
iMAC Pro (2017)
Mac Pro (end 2013)

There is only one limit: when using MacOS Mojave will not work Install Windows OS via Boot Camp on iMac with hard disk Capacity 3 TB.

This is due to the features of the alignment of different file Systems APFS and NTFS on the drives of such a container. You can find more about this on the Apple website.

The remaining models without problems support installing Windows 10 directly from the box.

What we need

1. Free place On the drive. Minimum volume to install 64 GB, and recommended - 128 GB.

In practice, you can do and less, but there is always a possibility of a lack of space for normal operation of the system or installing the necessary software.

2. For desktop computers The keyboard and manipulator will be required to constantly reconnect them in different OS. This can be both a wired solution and third-party models that have several channels to conjugate multiple devices.

3. USB drive on 16 GB or more capacious. Such a disc will not be required to owners of computers of 2015 release or more new.

4. An image of the installation disk Microsoft Windows. (ISO) or installation carrier This operating system. You can download the image on the Microsoft website.

5. You can use Windows 10 for free within 30 days from the installation. After that, you will need to buy the activation key. You can do it in a practically any Russian store, or on the Internet. On the official Microsoft website he is worth a decent $ 199 or 13 thousand rubles.

The average price of the key in Russia is about 3 thousand rubles, although there are proposals and on their own risk.

How to install windows 10 by steps

1. Run the utility Boot Camp. via search Spotlight, Finder or Launchpad..

2. Specify the program path to the downloaded image and select how much space on the installed drive is allocated to install Windows.

Think carefully at this stage, because to change the used section without reinstalling widows will not work. If you plan to play games or run heavy applications, it is better to highlight more space.

3. Wait for download necessary drivers and data from the network. After downloading and restarting the computer, installation of Windows 10 will start.

4. Master installation asks to produce basic settings And specify a section to which Windows should be installed. He will already be named Bootcamp..

5. After the installation is completed, it will be necessary to finalize the system parameters.

6. Once upon work table Windows It will be necessary to launch utility Boot Camp.. It will be stored on a system disk or on a removable drive, which was created at the preparation stage.

7. After installing all components and windows reboots You need to connect to the network via Wi-Fi or cable and run Apple Software Update. From the panel Start.

8. The program should specify all available updates. Install from and restart your computer.

How to run macos or windows

Now when starting a computer will automatically start operating system MacOS, and when holding the key Alt / Option See a menu with a selection of the download.

To quickly go from Windows to MacOS, you can use the tray utility (by the lower right corner), which allows you to restart the computer on the other OS in one press.

For reverse transition, go to System settings - loading volume, Enter the settings password and select a Windows partition for download.

How to remove windows with mac

To delete it is enough to run Disk utility And erase the section in it, which was set for Boot Camp with Windows. Then expand the main section due to the released space.

Good luck!