When you can charge an iPhone. How to charge your iPhone or iPad

Hello everyone! It would seem that the answer to this question is easy enough and to charge the iPhone is needed exactly so much time until the charging becomes complete and its indicator continues to burn near the battery icon. As soon as the battery indicator "discovered" and filled in full - everything can be safely disconnected charger. Logical? Of course!

However, there is another side of the question. For example, some users want to find out the exact number of hours and minutes that the iPhone must be charged. And they have it right - such data is never superfluous. Also, especially often ask me how many newly purchased iPhone should be recharged.

In general, I can explain all this turmoil "about the cost of charging" only the fact that some kind of magic is still hung around the iPhone. Newbies are afraid to do something wrong and in any way to damage the device, even when it comes to such a simple action as recharging. Looking ahead, I can note that it is almost impossible. But about everything in order, let's start!

The first thing to pay attention to is that charging time even for two identical iPhones will never coincide 100%. The rate of filling energy depends on many factors and here are some of them:

As far as the battery is very filled initially.
Is the original wire (power supply).
From what is power (computer or socket).
Adapter power. For example, Apple is officially charging the iPhone. And of course, in this case everything will go much faster.
Whether a smartphone is in air-mode, is connected to Wi-Fi or cellular networks, etc.

And this is still not all moments! So if your friend is charged for 2 hours, and you have 2 hours 30 minutes, then this does not say that you have a marriage, and it is worth running it.

However, there are some averaged iPhone charging time and depend on it primarily from the battery capacity of a specific model:

Model	Average charging time
iPhone 4, 4S, 5	1 hour 40 minutes
iPhone 5S, 5C	1 hour 50 minutes
iPhone 5SE, 6, 6S	2 hours 10 minutes
iPhone 6 Plus, 6s Plus	3 hours 30 minutes
iPhone 7.	2 hours 20 minutes
iPhone 7 Plus.	3 hours 40 minutes
iPhone 8.	2 hours 10 minutes
iPhone 8 Plus	3 hours 30 minutes
iPhone X.	3 hours 30 minutes
iPhone XS.	3 hours 20 minutes
iPhone XS Max	3 hours 50 minutes
iPhone Xr.	3 hours 40 minutes

Several important comments on this table:

It is believed as long as charging from 0 to 100%.
Some models were combined into one line due to the fact that the battery capacity of them differs quite slightly, and it makes sense with an accuracy of the time.
The data are specified when using the standard (which comes in the kit) of the power supply (5 watt power, 1 amp strength).
All indicators are approximate, just for the guideline. You can have both more and less.

Useful chip! It will be useful for those who want to charge faster - use the airrest. In places with a unprecedented cellular network, such an operation will help speed up the process by 20-30%.

It is important to remember about such things:

Up to 80% of the iPhone goes the so-called fast charge, the next 20% are recruited much slower.
How much time to charge new and just purchased iPhone? As much as the already used. Without any of the sizes and perversions (like three times it was fully charged, then discharged to the end, etc.). Modern batteries do not need such calibrations.
When the full charge is achieved, it is not necessary to run and hurry to turn it off. It will not happen anything terrible - in the iPhone itself, the power supply and even the wire is built into the special controllers, which will not allow the smartphone to "overnight" with energy and thus spoil.
iPhone can be charged many times. Not even so. Very many times! Why? Read personal experience About how I am, after 2.5 years of use, and what happened to it.

Conclusion: Charge an iPhone as much as he (and most importantly to you!) Need. Do not chase the exact indicators and do not complicate your life.

The battery is the heart of a smartphone. Without the right job, not getting from the device everything I would like. Of course, if the battery at the iPhone quickly discharges, you can buy and not worry about it. But fast discharge is only the first sign that the apple device will soon need to be carried in. How to distinguish and what to do if the smartphone battery does not work? Also often the question arises how to replace battery iPhone. It is important to figure it out on time, whether it is possible.

Why do batteries for smartphones deteriorate over time?

Unfortunately, the battery is almost the only "iron" part of the gadget, which is susceptible to physical aging. Over time, he will start losing the container, because of which the charge will be consumed much faster. Even lithium-ion and lithium polymer batteriesnot possessing the "memory effect" that spoil nickel Cadmium Batteriesinstalled on the oldest models.

The loss of the container is manifested after a certain number of charge-discharge cycles. In their process, the battery and loses its container. It will become faster, but also to spend energy will be too smart. Manufacturers specifically expect that the battery will work for no more than 1000 complete charging cycles without loss of tank. After that, it begins to quickly decline.

How to charge the iPhone not to ruin the battery

To correctly charge the device, you need to remember some rules. Such an elementary action also requires a competent approach. Otherwise, there is a chance that the battery will soon spread with the good third of its capacity, and you are with several hours of work of the device.

General rules charge

It is necessary to remember some nuances and features when used, which must be known to each owner of the smartphone. Their compliance will save the battery in perfect order.

You can not discharge the iPhone to 0%. The full cycle of the charge-discharge will reduce the life of the device. It is much more profitable to charge it after reaching it by 30%. In this case, the battery will suffer less. For example, with a 100% discharge, the battery "will live" only 500 discharge cycles. If you constantly put it for charging as soon as the energy mark reaches 50% - the number of cycles will grow to 1500.
Do not use the device in the process of charging. Not only is the energy to accumulate slower - there is a risk that the battery will be damaged. In addition, then the gadget will overheat, which is not good for both the battery, as well as for other electronic components.
It is necessary to use only high-quality USB cables and specials for them. The low-quality wire is capable not just not to approach - its characteristics will not match the gadget: it can spoil the charge controller. And replacing the latter is a big problem.
You can not store the battery in a discharged or fully charged state. Do not use iPhone? Charge it up to 50% and leave to lie. In this case, its battery will be preserved much better.
It is recommended to fully discharge the battery to the status when the smartphone turns off yourself. This will allow you to calibrate its capacitance due to the presence of the minimum "memory effect".

At the same time it is worth dispelled by several myths, which are pioneering along the old memory around modern batteries for phones and tablets. They are not just useless today. These myths to some extent harm the device and its owners.

it is impossible to leave a smartphone on charging for a long time. Wrong - modern iPhone is equipped with charge controller. If the battery is full - not a drop of energy will not go into it, the controller will not allow this. Consequently, the "recharging" effect will not come;
it is impossible to recharge the smartphone until it discharged to 0%. Very harmful advice, because in this case the battery will live less. It stretches from the time of nickel-cadmium batteries, which "remembered" the last value of the battery before charging, and then allowed to take energy strictly to it.

These two myths are the relic of the past, when the phones did not possess and part of what they can now. Previously, it was easy to spoil the battery, leaving the device on charging overnight, and lose part of the tank, simply chargening the battery with 10-20% of energy. Now it is no longer relevant - the technology stepped far ahead, so they will not worry about such trifles.

How to charge a new battery for iPhone

Each new battery initially requires a special attitude towards himself. It must be determined in a certain way to calibrate so that there are no problems with the duration of its further work. It is especially important to immediately take the calibration of the new battery from the first days of "life" inside the smartphone. Because then correct the situation and restore the lost container due to improper charging will be quite difficult.

Of course, the battery that went on sale together with the purchased smartphone, and any other, "out of the box" has a certain amount of energy. It is desirable to spend the first charging immediately after purchase, putting a smartphone for 12 hours to charge. It is not necessary to include it and all the more use the iPhone - the charging process should take place in full for the device.

After 12 hours, it is necessary to discharge the battery before independent shutdown of the gadget. This procedure allows you to calibrate the battery, squeezing the entire possible container from it. Without it, some part of the battery reserves remained in the "sleeping" condition. Therefore, the term that the device could stretch without recharging would be somewhat reduced.

You can repeat this cycle of full charge and discharge several times. But it is not necessary to get involved - there will be one or two calibrations. Otherwise, the battery will work longer, but also the discharge cycles will end faster. That is, it will work out its resource and stop keeping energy as it was originally supposed to him.

Immediately after this procedure, the calibration can be fully used by the gadget. It is important to remember how to properly charge the iPhone and what to do with it is not worth it. This will allow

What cable to enjoy to charge the iPhone

It is necessary to choose all components and consumables for your device from Apple. And if or special glass can not be branded production, then it must be if not applicable, then at least certified. Unfortunately, for this there are a number of reasons.

The first is the tricky iPhone charging system. Ordinary Lightning cords for it will not suit. In order for the energy to start flowing into the battery, a special chip is needed in the plug. Otherwise, a smartphone operating on iOS 7 or a newer version will literally swear on a non-certified cable. This identification chip is not installed in cheap Chinese wires that can harm the iPhone. Therefore, they will have to buy more or less high-quality and expensive cords. Such models will comply with MFI licenses (Made from iPhone / iPad / iPod). Apple certifies some firms to get a small percentage of cable sales from them. Consequently, the products of such a company can safely buy.

The second reason is the risk of accidentally burn the IPhone charge controller by a poor-quality cable. If even the product is certified - in the lowest price category there is a chance to accidentally stumble upon a wire that is not equipped with a chip needed to control the current. Of course, the device itself will cope some time with a voltage - but constant differentials and an increased load will first disable the chip controller, and then burn the battery. Yes, and poor-quality cord will quickly fail and break. Here are cables in braid, for example, can live for a very long time.

What firm cables can be bought for iphone

There are several specific companies that are closely engaged in the manufacture of special products for the iPhone, including Lightning cables. It is worth paying attention to the models produced by these brands. Since they all comply with Apple standards and work without complaints over long years.

The first firm is with its unusual solutions and a beautiful appearance of products for the iPhone. USB cables from this company are affected by their diversity. The manufacturer is not limited to standard solutions and colors. On sale you can find literally all - braid cords, flat ordinary cables and wires of incredible colors. Quality, in turn, is as high as the originality of Remax. The goods are able to work for several years without interruption. This Remax and love among many iPhone owners.

Then you can mention. The company does not have such a variety as the previous representative of the accessories market for Apple. But it can be found quite interesting and convenient solutions for any purpose. For example, a cable-spring, which is ideal for. It is not climbing and does not break - it is too difficult to damage such a wire.

By purchasing cables of these manufacturers, the buyer will never receive a fake capable of damageing the iPhone in the charging process. Because these brands are responsible for the quality of their own reputation and the MFI license from Apple. Naturally, they do not want to lose her.

What you need to do is not to charge the smartphone so often

If you are worried about what your iPhone is quickly discharged - it is possible that the case is not in the poor quality of the charger or the "old-age" battery. There is a chance that the problem lies inside the software component.

It is important to understand that all applications used and functions, even if they work in background modewill pull the energy from the battery. Therefore, it is necessary to constantly turn them off so that they do not spend the battery. What are the parameters and applications to pay attention to:

Wi-Fi, Bluetooth, 3G-Internet - Users often forget to disable these services after use, and they continue to broadcast anyone the desired signal into space.
Geolocation - it should be included only when it is necessary to directly navigate the terrain or put a mark on virtual Map cities. In other cases it is not needed.
Increased screen brightness. Display - the main reason quick discharge battery. Most often, the brightness of the screen is raised on the sunny street to at least consider anything. But this problem can be solved or similar to the display.
"Heavy" applications - Skype, MS Office for smartphones and them like. If some unnecessary applications Work in the background - they need to be turned off. And then the energy will not be spent on them.

In addition, it is important not to forget to leave any applications upon completion of their work, even if they are still needed. For example, it is worth a browser in the background, if right now he will not need you.

Unfortunately, a number of other reasons can adversely affect the battery. It is impossible to overheat the battery of the smartphone above 35-40 degrees Celsius. Excessive heating leads to a container degradation. The supercooling below -15 degrees Celsius is similar unpleasant to the battery. Therefore, it is not worthwhile to wear an iPhone in a bag or an external pocket. But you can buy or fabric made in the form or - it will warm the gadget, which will allow them to use it in the winter. And in the summer - it is impossible to charge it on the windowsill or dashboard of the car.

How to understand that it is time to change the battery

The battery can be distributed independently, it is not necessary to contact the service center for the formulation of the "diagnosis". Most devices simply simply explore and work with them for a couple of hours.

The brightest feature is a disabling device when there is a bit of charge inside the battery. As a rule, the iPhone turns off when charging at 10-20%. This is a vivid example of a battery violation. In addition, if it loses the charge literally for counting hours is already a sign of damage or aging: no program is able to discharge the battery so quickly. But if the smartphone heats up - there is a risk that it is faulty. The heating of the battery or processor is the indicator that the iPhone is actively working. That is, there is energy, but it is spent on something outsider. Perhaps the virus did the device. It is worth checking what is the reason, with the help center.

The main feature of the degradation of the battery from time or incorrect circulation is too fast charge loss and the decreased time required to replenish it. If there was enough time for the work of the smartphone for all day, and now he suddenly began to "starve" in a few hours - this is a reason to think about it. However, do not forget that it can affect it and a large number of Applications or high screen brightness.

The following diagnostic option is to explore the battery itself for deformation. Unfortunately, for the iPhone, this advice is not out of simple, because for inspection you will have to disassemble the device body. Although with a rather serious level of worn, it will be possible to determine the deformation "on the eyes".

To do this, you will need to study the back cover if it is made of plastic. She raises a little, will acquire a kind of humpback. This is a sign that the battery under it swept. The reason is that with the time the battery during degradation begins to highlight gas. And as soon as this process began - you need to replace the battery. Random strike or overheating can contribute to the micro.

If the smartphone is made of metal or glass (as latest versions iPhone), the battery will not be able to deform the back cover. But it will affect the work of the touchscreen - the display will be slightly convex and can crack when pressed. In addition, if the display decides - it will begin to heat up to gradually. In particular sad situations, with a notice of clicking on the screen, there will be divorces. However, it can happen and not because of the battery, but after falling without. In any case, it is worth visiting the service center to find out the cause of the sketches and divorces.

Is it possible to replace the battery on the iPhone yourself?

Apple adheres to a strict principle - never make smartphones with a rear cover. And they still have it - the iPhone is very difficult to operate to replace the battery. This can only be done by an experienced person who used to come across such a necessity.

Of course, replace the battery on the iPhone of any generation is possible. But for this you will need a little time and enough courage. Unfortunately, in the process great chance is accidentally damaged by a smartphone. Therefore, it is necessary to entrust the opening of the gadget and replace the battery professionals from the service center. They will be able to make your device live a long and happy life.

How to replace iPhone battery

Different models of smartphones from Apple have a different principle of opening and removing the battery. Somewhere it will be more difficult, somewhere - easier. Naturally, such intervention is associated with a certain risk.

But it is necessary to remember - to begin with, you always need to stock up with a certain tool. Otherwise, open the smartphone will not work. It is necessary to find:

Flat plastic object for opening latches.
Special screwdriver with five petals, called Pentalobe.
Pretty powerful suction cup.
Conventional crusade.
Long thin object for battery lifting.
Small soft piece of fabric.

This toolkit is enough to open any device without any problems, albeit with a certain risk to spoil the smartphone. Naturally, you need to buy a new battery. Before disassembling the APPLE case, you must turn off the device.

iPhone 4.

First, it is necessary to take a five-bearing screwdriver and unscrew two barely noticeable screws located near the charge connector.

Then carefully shifted back iphone panel From charging connector. It will move a few millimeters. After that, it is possible to raise it - it is rather careful to pull over the top edge, which made a housing. The device must be put the charging connector to yourself, down the screen.

You must turn off the accumulator loop. It is located closer to the bottom bottom corner of the battery. To do this, it will take very carefully to unscrew the screw and disconnect a silver connector. IMPORTANT! It is impossible to concern with metal contacts of contacts! It will provoke short circuit - And then the phone will accurately have to carry to the service center. It is very important not to drive in the process of any fasteners. In addition, the plume fastening screw is also a lock coaxial cable - A small plank that is attached under the loop itself. It is necessary to put it in front of the assembly.

After that, you can start removing the battery from the housing. And then problems begin. The bottom line is that the battery, in order to avoid "Boltanka" inside the case, keeps on a good glue. And therefore, we will have to literally handle it from the body. But for this you can warm the battery with a hairdryer - it's still rooted and goes under the emission. If the battery is still needed - it is not necessary to heat it, you will have to tear so.

To remove the battery, you need to pull the plastic tongue (not for the train!), and in the resulting gap shove some long and durable subject. Preferably plastic. Then, as a lomik, you need to very carefully raise the battery (not to put pressure on it under it - there is a risk of damaging the device), along the way, pulling it out for the plastic tongue.

After that, you need to install a new battery - and you can collect the smartphone back. If you did not have a protective case or film - then dust and dirt will be accumulated under the lid. It is recommended to remove it before assembly.

iPhone 5.

This generation disassembles otherwise than the previous one. This time you need to remove the front panel with the display and the touchscreen, and not the back cover. Therefore, the risks in disassembly are much more - it is possible to accidentally damage the screen and cameras. First of all, you need to unscrew two rigs with a five-bearing slot near the Lightning connector.

Then take the suction cup and attach it to the display slightly above hOME buttons.

You need to raise the display - and in the resulting gap, disconnect the HOME button cable, for which it is a thin plastic object to shove some thin plastic object and very carefully pick up the bracket first, which closes the plug, and then the train itself.

And then the same item must be very careful to squeeze the latches, holding the screen on the spot. After that, it is necessary to extremely carefully raise the display. It holds on the plumes also in the upper part, it is important not to break them. It is necessary to put the display at a right angle to the housing. To the right of the battery, in the very corner of the device, there is a plank on several screws. They have different lengths - it is important to remember where which one.

The bar must be carefully removed, and then disconnect the screen loops under it with a plastic tool.

Then we find the bracket on the screws below the plastic tongue. It must be removed by unscrewing all the screws, and then the plastic tool remove the accumulator loop. When assembly, it is important not to confuse the screws - they have different lengths.

Then you need to push the battery with a plastic tool to remove it from the socket. You can take carefully several times around the perimeter, disconnecting the battery from glue on the housing. In the 5S model and older uses double-sided scotch, which will need to be pulled out before dismantling the battery.

It is important not to damage motherboard. After that, you can safely install the battery cooked for replacement, and collect a gadget in the reverse order.

iPhone 6 disassembled in a similar way - only the position of the screws and the loops can be swapped. It will also be necessary to pull three sticker under the battery, which are located at the bottom of the device under the battery.

As can be seen, it is easier to disassemble a nuclear warhead than an iPhone of any generation, if you do not have certain experience and ability. Therefore, we recommend contacting the service center to eliminate the possibility of random breakdown in the battery replacement process. Give the gadget to masters - it means to provide him quality repairs without consequences.

Did the iPhone battery refused? Contact MonkeyShop service center

If your smartphone from Apple suddenly refused to charge, or his battery dies literally after several hours of using the gadget - it's time to change the battery. You can do it yourself, of course, it is possible - but there is a huge risk to break any important chip or cause a short circuit. In such a fine case, like disassembling iPhone, it is better to turn to a professional master.

And the MonkeyShop service center is ready to provide you with the repair of phones and replace the batteries in them. We learn why your gadget does not hold a charge, and I will definitely correct the reason. If the case is in the battery - the replacement will happen quickly and painlessly. If, in something else, the reason will be corrected.

Our service center works in the Dnieper (Dnepropetrovsk) - at any time you can go to us and give our masters to the smartphone for the treatment of his illness. In the meantime, we repair the device - you will have the opportunity to like on our store covers and other accessories, choosing a high-quality charger and a USB cable to it. Or perhaps you will be interested in any case for the iPhone or safety glass for him.

Repair and high-quality accessories - MonkeyShop will take care of your gadget.

Last week, the story was popular in the network, the heroes of which were the unknown Internet user and senior Vice President Apple on the software of Craig Federigi. The first one sent a letter to the head of the corporation Corporation in which he wondered whether to delete tasks from the list of running applications to save the battery charge. "No and no longer," - answered his chef Federigi in his own Twitter.

Soon after that, foreign and domestic media began to publish a link to a special section on Apple's website, where it describes how to increase the operation time of the iOS device without recharging and extend the overall service life of the built-in battery.

On the page that received new popularity is noted that the term "lifetime" in relation to the battery means it is the term that goes between two charging, and the definition of a "life expectancy" implies the time after which the battery is required to replace the battery. How to extend both both - translated RG Digital.

1. Apple is advised to update the software in a timely manner, since updates often include new energy saving technologies.

2. It is worth avoided too high and too low temperatures when using gadgets - it also applies to tablets, and smartphones, and laptops. The range of comfortable temperatures is from 16 to 22 degrees Celsius, the upper limit is 35 degrees Celsius. Charging at higher temperatures can lead to unchangeable damage to the battery. Using cold conditions can reduce time autonomous workBut this phenomenon is temporary.

3. Remove covers from devices during charging. This will allow them to avoid overheating, because charging can cause excess heat.

4. Keep the gadgets half charged if you leave them for a long time. Fully discharged battery may generally lose the opportunity to charge in the future. In turn, the battery charged 100 percent for a long time can lose part of the tank. Store devices are recommended at a temperature not higher than 32 degrees.

5. For iPhone and iPad, there are additional ways to increase the battery life. The first is to establish an automatic brightness at which the device is adjusted for the conditions of lighting. The second is to constantly keep Wi-Fi enabled, since this access method consumes less energy.

6. In iOS 9, an energy saving mode appeared, which warns the user about the weak battery charge, and also reduces power consumption, shutting down synchronization with ICloud, the transfer of AIRDROP data. At the same time, the ability to call, send SMS and go online will remain. When the device is postponed, the savings mode automatically turns off.

7. According to Apple, IOS 9 has become the most energy efficient operating system, since it has the opportunity to find out which applications are most actively spending the battery charge. If desired, the user can limit the background activity of the most "voracious" programs.

The owners of the fashion gadget know that it is necessary to charge an iPhone every day. It is a habit - put in the evening for charging, in the morning the full battery. And some believe that it is possible to charge an iPhone after it is completely discharged. Whose opinion is right?

According to experts, lithium ion batteries You need to charge every day. This applies to and charging iPhones. If you want the battery to serve for a long time, it is not necessary to charge it.

How to charge iPhone

Specialists have such opinions on this:

Charge the phone is often necessary. That is, if the level of charge is not yet reached, then it does not need to wait. And allow a full discharge of the battery every day before turning off the device also to anything. Such a mode is destroyed for the phone, so it is better to recharge the iPhone several times a day in a little bit than from 0 to 100%.
The charge level must be kept above the average mark. That is, these numbers can range from 40% to 80, and can be connected and then when the battery shows a charge of 50%. But to disconnect the charging is best when the battery has not yet disappeared at the maximum. Quite enough charge 90%.
Full discharge and 100% charging - 1 time per month. Dimmed the battery until the device is completely turned off, you can charge to the maximum mark - 100%.
Many Apple products are convenient when the phone is charged at night. In the morning the battery shows complete charge. But in this way, you can quickly plant the battery, because it is charged not throughout the night, and then stays in standby mode, but on the feeding. Thus, the battery fails faster.

How to charge iPhone - tricks or how to extend battery life

In order for the battery last longer, you need to consider the following:

if you constantly charge the battery 100%, then such a device will be enough for a maximum of 500 cycles, while the battery will be charged only by 70%, the battery life increases and then the battery is enough for 2000 charging cycles;
do not expose the device with superheat and overheating. Extreme temperature range is: from +15 degrees up to +40 degrees. If in the summer there will be a record high mark on the street, then the iPhone battery can lose 35% of the tank;
overheating The battery carries worse than supercooling. Therefore, it is better to abandon the wireless charger or use it in case of extreme need when it is not possible to connect to the network. All wireless recharging create excessive heat and wear a battery life;
extend the life of the iPhone battery life in this way: to reduce the brightness of the screen, turn off those applications that use GPS navigation. If the signal is bad, and the phone is in standby mode, it is better to include the mode "AVIA";
turn on the "Energy Saving" mode. To do this, go to the "Settings" - "battery", make the appropriate note "On".

Actively used laptops (MacBook Pro, MacBook Air), smartphones (iPhone) and tablets (iPad 4, ipad mini.) They constantly need recharging. However, how to charge correctly to extend the life of the battery does not everyone knows. So you can hear two different opinions, one of which states that the battery of any mobile device, be it MacBook Air. Or iPhone 5 should be completely discharged, and then put it to charge up to 100%, and the second advises to maintain the charging level of the device by about 40-80%, regularly recharge the devices.

These tips are not deprived of meaning and have a completely real attack. In the recent past, nickel batteries were distributed, which possessed the so-called "memory effect". Here they needed to be able to discharge to the end. Now in laptops, smartphones and tablets (especially if we talk about mobile technique Apple) are mainly lithium-ion batteries for which this problem is so acute. However, in order to extend their uninterrupted work as much as possible, because the service life is measured for years, it is necessary to adhere to some rules for use.

1. Devices need regular recharging.

You should not discharge the device completely, it needs regular recharging. Optimal will be recharged after the battery is discharged by 10-20%, not lowering the degree of charge even to a level of 50%.

2. It is unacceptable to keep the devices for a long time on charging.

For lithium-ion batteries Do not need a permanent complete charge. The recommended charge level should be between 40 to 80%, so it is desirable to adhere to these frames. After charging the device up to 100%, it is unacceptable to leave it and then on charging.

Sometimes it seems very convenient, but it should be remembered that this can reduce the battery life. Even if the device is postponed for the night, you should take care that it is made using special energy-saving sockets that will allow you to disconnect charging through a certain amount of hours.

High-quality phones and laptops have a built-in charge controller, which allows them to report full charge signal and even disable charging after that. Devices with a similar function is permissible to constantly keep on the network.

3. Once a month discharges to zero and complete battery charging.

Occasionally complete discharge iPhone. Or iPad is still needed. Once a month it is recommended to produce a complete discharge cycle to zero and charging up to 100%, which allows you to calibrate the device. Indeed, on a smartphone or tablet, the balance residue is most often indicated either as a percentage or in hours and minutes, which will come full discharge. But the frequent use of small charges leads to incorrect operation of this function, therefore it is necessary to perform calibration to return the accuracy of data data.

4. Unacceptably overheat the device.

The battery life, for example, an iPhone device can decrease due to overheating, so that high temperatures should not be allowed.

When performing these recommendations, you can significantly increase battery life. It should not be too palicing if it is not always possible to perform an optimal charging. Even if the device is discharged once again to zero or the need to charge it to full before the far distance, then this should not become a reason for unnecessary anxiety.

You asked if you can charge the iPhone charge from the iPad? What adapter choose, is it possible to use the phone while it is connected to the outlet? Now I'll tell you everything.

How to charge iPhone

It is impossible to correct the iPhone, it can be charged quickly or slowly. What does it depend on? From a particular smartphone and power supply.

Charging for ipad helps. But not always.

A moment of statistics: iPhone 5S consumes 1a, iPhone 5 takes the same. Connect them to the power supply for the iPad without any sense. But the iPhone 6+ and 6S + eat 2.1a, it makes sense to connect a block from the iPad. Let's check.

We take two iPhone 6+, connect a standard charge to 1a to one, connect the block from iPad to 2.1a. In 10 minutes, the first was charged by 4%, and the second is 10%, profit! To accelerate charging, use the airrest, the difference is small, but the method still helps.

Charging the battery during use

You can use the device during charging, just charging will go a little longer.

Current power decides

By purchasing a multi-voltage charging, pay attention not only for current strength, but also to support Quick Charge, it will greatly speed up the process. For iPhone, this cool topic does not work, but if you have Galaxy S6, then feel like a king.

The same principle is valid for Power Bank: it is better to take a charging that gives the current 2a. You can not kill your smartphone from her, but you can always charge the tablet. Whereas with an external battery on 1a, this situation is not possible in principle.

IPhone is not charging? Check the Lightning cable

I bought the Chinese Lightning for 100 rubles in the stall, but the iPhone refused to charge? Before buying, be sure to look at the packaging if you take a proven certified product Belkin or Griffin, then everything is OK. But when there is no lettering "Made for iPod, iPhone, iPad" on the box, then you can fly with a cable.

Replacing the battery do not need

The modern battery resource has about 1000 cycles, and this is about 3 years of work. So you will rather change your old phone to a new one, because he just tired you, how to start to really suffer because of the killed battery. If, of course, you did not kill her by Chinese wires and rooted Power Bank.

To the iPhone not burned

Achtung! Do not charge iPhone, lying in bed. Just imagine: tupping to the screen, fall asleep, the phone falls on the bed or under the pillow, underproying, overheats and fire. Do not do that.

If you have found a mistake, please send the author of the poddlewoman! Highlight text fragment and click Ctrl + Enter..

As you know, the owners of IOS-devices charge their devices in different ways. Some believe that you need to resort to this procedure daily. Others are confident that the charge should end completely, and only then you need to connect the gadget to the outlet.

How to do this procedure - probably, no one can say to 100%. The only thing you can believe is Apple's recommendations on this issue posted on the company's resource on the network.

How to charge a new iPhone 5S - another difficult question. They ask many newly new owners of the gadget of this model or iPhone 6, as well as any other version of the "apple" phone.

A number of users are surprised by such a recommendation that charging the device to maximum value, that is, up to 100%, harmful. It must be said that many experts believe that it is necessary to keep the battery level in the borders of 50-80%. According to the results of some tests, it was determined that a charged up to 100% apparatus can safely work out at least 500 cycles. While the battery, the charge value of which was stopped in an indicator of 70%, withstood more than 1000 cycles. Thus, with repeated procedures, everything is clear. But how to be with the very first charging?

Everything is more complicated here. On this occasion, there is still discussion, and there is no single opinion.

In this article, we will try to figure out how to charge a new iPhone 5S or 6 for the first time. We give a number of tips, including. provided by the manufacturer. Observing exactly all the recommendations, you will significantly extend the term of "life" of your IOS-device battery.

How to charge iPhone 5S or 6

Of course, the battery of the new iPhone 6 (or another version of the apple gadget) is already equipped with a certain amount of energy, it must be recharged. Moreover, the duration of this process should be at least 12 hours, and better - a day.

The recharge operation itself looks like this:

Connecting the USB cord from the charger to the iPhone.
Connecting charging to the power grid.
Leaving the gadget for 12-24 hours.

Thus, the device will take place the first charging cycle, after which it will be necessary to completely discharge the battery. And exactly 100%. To do this, it is necessary to use the device as much as possible. After that, you need to proceed to the second cycle, namely, you should completely repeat the steps of the first.

At the end of the second cycle, the device is discharged again with subsequent charging. And the more repetitions of such a procedure will be produced - the longer the iPhone will work, equipped with a large amount of energy.

Note that after 1-2 cycles, the discharge of the gadget is carried out in natural mode. But it is recommended to make it acceleration. To this end, you can download the bulk software using Wi-Fi or enable a long video with video.

After 2 years of operation of the device, it is better to replace the battery in it to a new one.

In the process of recharging, you should not leave the phone in the sun. It is necessary to avoid direct ingress of sun rays to the device. Therefore, do not leave the gadget in a heated machine or on the windowsill. If the device is overheated, the fluid flows out of it, and somewhat, it will soon fail.

Is it right to leave the device on charging for the night?

To give a competent answer to this question, you need to understand the essence of the processes that proceed inside the device after it is connected to the power adapter. Immediately note that the charge of the battery is the embedded controller (or module). By the way, this element controls this process not only in gadgets from apple companies, but also in almost all modern mobile devices.

Why do you need a controller? In order for the battery does not recharge. But at the same time, the element contributes to the phone charged as quickly as possible. At the same time, an indicator of 80% of the battery is recharged very quickly, and until the remaining 20 - in slow motion.

After the process is completed, the power supply is turned off by the controller. The system seems to leave the battery alone - and does not give energy to act in it, but does not take the charge at the element. The device itself is charged from the device intended for this purpose. In other words, at this moment the battery does not happen even account. The way the existing popular myth is that after 100% charging the battery starts working in cyclic mode - it does not have any reason. If it were true, the element would be very quickly subjected to wear. And this, of course, no one needs.

Let us dwell on another fact. It is known that every battery can self-discharge. And this process is quite natural. Of course, if the battery is not connected anywhere. In lithium polymer elements, this value is only 5% per month, which is very small, especially compared to other types of batteries.

A new charging cycle is launched controllers if it reveals a significant level of charge loss. Regularly this element checks the battery to this object. But this process will start only after no less than 2% of energy. And the latter can occur no more than 2 times in a month. So, if the user leaves his gadget on recharging days by 30, then 2 repeated cycles will be passed the battery.

So, how to properly approach the issue of charging iOS-device? Probably, many have already understood from the article that there is no single "recipe". Apple's gadgets includes a controller to protect the device in case of critical situations. On the forums, some users note that they enjoy smartphones for 3-4 years, charging them is impossible, that is, as it fell. Most often, overnight, the device is charged 100%. But especially active users You have to make a recharge and in the daytime. And with this approach, nothing terrible with the battery does not happen. After 4 years of use, it keeps the charge well (on average, 1 day - without problems). So on this issue you can not worry hard. Run the process when you consider it necessary. The most important thing is to use the original accessories from the manufacturer. And concerns this not only charging. Otherwise, you can put irreparable harm to your gadget.

With each output new iPhoneThe users appear almost the same questions. This time, everything is also interested in the question: "How to charge the iPhone 8 and iPhone 8 Plus?".

With iPhones, I am friends quite a long time and know quite a lot of information about this. Therefore, I want her to share her and I think something useful you will find for yourself for yourself.

How is the first time to charge a new iPhone 8 or an iPhone 8 plus?

That moment came when you made a very long-awaited purchase and now iPhone 8 or iPhone 8 Plus in your hands. You actively use it and at the end of the day the problem appears: "How to charge your new iPhone 8?".

I can tell you that the first charging that hundreds will not differ from each other at all. Now all the elements are stuffed with controllers and do something wrong - this is a very difficult task.

Therefore, we do everything in the old manner: when you see that the phone reached less than 20 percent, you can discharge a little more or immediately put it for charging.

Now everything is measured in the number of charge cycles and the problem with the battery, most likely you will receive anywhere on the third year of use. If something is wrong, then simply check the volume of the Battery Life program.

There is a type of users who use devices in very hard mode and constantly playing or simply actively using the gadget, charge several times a day. In this case, you may have to replace the battery and a year later.

Therefore, for you another couple of useful tips:

if you buy third-party accessories for your devices, then they must have Apple certification (looking for the "Made for iPod / iPhone / iPad" logo);
we try not to use Chinese cables and blocks. At best, the battery will lose its capacity faster, at worst - the device may fail or even catch fire;
you can use the iPad charging and even need;
if you love Power Bank, we buy proven brands.

Also, I also heard a lot that fast charging is very harmful to devices and this is evidenced by information about the electrocars. There is a recommendation to carry out this kind of procedure for a maximum of once a month.

With phones story a little different, because there have already been invented a lot different technologies. The fact that it is harmful or not, no one will tell you 100 percent.

Therefore, I charge as you like, most importantly within the normal range and simply fulfilling recommendations from the manufacturer.

How to quickly charge the iPhone 8?

Suppose you have discharged your iPhone 8 and then trouble, you go through some half an hour. Power bank in our presence is not available, but the phone is needed in working condition.

There may be such ways, all depending on the situation:

There is no additional accessories. Include the airrest and put for charging, so the phone will not use the network and Wi-Fi, which will give a small increase to speed. When the device is completely turned off, the result will be even better.
You are lucky and there is a block on 2 amp. In this case, everything is much easier, because modern iPhone supports such a type of charging and you will get an incredible speed.

Unfortunately, in the kit only a block of 1 amp. While all other manufacturers have long gave their users to rejoice in normal blocks of 2 amps right from the box.

So it is better to solve than just buy a block like an iPad for 2 A, probably not to find. If that, the full name "Apple USB power adapter is 12 W".

This generation also has a fast charge, but this story deserves a separate item and right now we will proceed to it.

How to enjoy fast charge on iPhone 8?

To charge your smartphones is practical, fashionable and such an opportunity is present in all modern brands. Apple turned out to be in the role of lagging, but still they did it and added this opportunity.

True, as always, they did not do as everyone and many are not very satisfied with their act. At the presentation declared 50 percent in 30 minutes, and in fact, spend a bunch of money to get this feature.

To achieve this result, you need to purchase:

Apple USB-C Power Adapter 29W, 61 W or 87 W (3 590.00 PYB. / 5 490.00 PYB. / 5 790.00 PYB.);
Cable USB-C / LIGHTNING (1 990.00 PYB. Per 1 m, 2 690.00 PYB. - 2 m).

Having bought it all, you fall into a very round sum. But only when performing this condition, you will receive fast charging On your iPhone 8.

As an alternative, I suggest just buying the same power supply as IPad for 2 amps for 1 590.00 PYB. And rejoice in life. Of course not so fast, but this will be enough for you enough and much cheaper.

How to charge an iPhone 8 without wires?

To add even more firewood to the fire, let's talk about wireless charging. Here, in principle, the same story as in the past paragraph.

This feature was available at Samsung for many years and in 2017 Apple finally decided to add it to himself. All the same standard Qi.

So if you do not like the wires, you buy a special stand, and just putting your smartphone on it, you have charging.

Plus, the manufacturers are already enough and you can find cheaper options than in Apple's store. We are simply looking for a Qi standard.

How to charge the iPhone 8 in the car?

If you owner as an iPhone 8 and some car, then the question arises about the charging of your smartphone in the car.

It is generally depends on the car. But if this is the most standard version with the cigarette lighter, that is, two events:

we buy a car charging and then we insert your native cable into it;
we buy a car charging with a built-in cable.

Naturally, there is also a rule with Apple certification and also looking for the Made for iPod / iPhone / iPad icon. Or at least we buy proven brands to do not burn.

If you do not charge an iPhone, now I will try to solve your problem.

Especially for you, I prepared 7 reasons, because of which the iPhone may not charge and now I will tell you about them!

Software glitch

The first frequent reason why the iPhone is not charging, it is a glitch in the system itself. Maybe something in iOS hung, and the controller, which gives good to the transmission of the current battery, simply does not work. The easiest way to get rid of IOS from freezing is to make a hard reboot. It is performed easy and simple. Press the HOME key simultaneously and the lock button and hold them about 20 seconds.

At the same time, pay attention, when rebooting, we will light up white screen with an apple.

At this point, the keys are not needed yet. Hold Home and blocking for more than 5-8 (so far it will go out all this).

After such " hard reboot"Turn on the iPhone again and check, the iPhone is charging or not.

Problem firmware

If your iPhone stopped charged after updating the system, then there is some kind of glitch when the firmware happened. It does not apply to some particular version of iOS. That on the 11th, which is on the 6th, in principle on all versions of ios., iPhone is charging :)

Another thing is that sometimes after updating the firmware, the smartphone stops charging. Although everything worked fine before the firmware. What to do in this case?

1. Make Range

If before the update on new version you did backup Your device (backup), then in this case will not be difficult to restore the device via iTunes. It is done very simple. IN program iTunes. For this there is a special button " Restore from copy...»

2. Recover factory settings

If you did not do the backup, it is very bad: (as in this case will have. When full reset All information from the iPhone is deleted. Including all photos, video and music will be removed.

Faulty charger

If the iPhone is not charging, then very important moment When searching for a reason, it is a check of the charger and cable. In the next point we will talk about the Lightning cable, and now in detail about charging.

Here is this block, too, may fail:

Simply put, sooner or later he can burn. Especially if we are talking about a cheap Chinese charger. In general, it is impossible to charge the iPhone "left" charger. There may be very and very harsh consequences. At best, the battery is extended much faster, and at worst, in the iPhone, something will break or he will simply explode.

Okay, okay, do not perceive words with the explosion very seriously. Still, not so many iPhones exploded around the world.

Try to take another charging, and if you do not have it, then try to deliver the phone to charging through the computer. If it works, it is good, we are looking for another charging and use on health. If it does not charge from the computer, then continue to seek the cause!

Faulty Lightning Cable

Earlier, I already said that in the next point we will talk about the Lightning cable, because they also fail and even more often than the charging unit.

Here is this original Apple cable with inaccier use fails after 1 year:

It is a dofiga, but breaks faster than some left.

If you have the opportunity, you test the performance of charging using another cable. Because even if your old cable appearance It looks great, it does not mean that he is working.

If there is no other Lightning cable, you will have to buy a new one. Earlier, I already said that it is impossible to use non-original charging, but it is fortunately not to the Lightning cables.

Cable can safely buy on Aliexpress. Another thing is that they are not always worthy of quality. But if you take from a proven manufacturer, for example, in the UGREEN store, the cable will work much longer than the original Lighting, and it will also cost every 5 cheaper. You can buy.

Cheap wires either no no longer canceled, I took myself a beautiful Lightning cable in a denim felling. It costs less than the 3rd dollars. You can buy.

Buggy port Lightning

FROM lightning cable We figured out, and now let's get up by the question of the port itself where this charging is inserted. Now I am talking about the port where we are inserting Lightning cable.

In the worst case, something could break there, and in the best there was just a lot of dust, garbage, seeds and other rubbers and because of this, contacts with the cable will not be contacted.

Look at the port and if there is dirt there, take a small wand, like the toothpick and clean the port gently.

USB port does not work

If you charge the iPhone from the computer or laptop, it may not work trite USB port, or give out insufficient nutrition. Try another port, and better use the charger or PowerBank.

Faulty parts (battery, loop, drowned, etc.)

If nothing helped, and the iPhone still does not charge. Most likely the problem in the malfunction of any components. It can be "killed", time or bad charging, battery, broken loops from falling, other damage and the like. In addition, if your smartphone "Drill" or in it simply got moisture, it can also cause breakage.

An option in this case is one - bring the iPhone to the diagnostics to the specialists. Let them look.

Conclusion

I hope this lesson at least somehow helped you. And if you managed to solve your problem, the iPhone was not charged, and now everything is Okey, then you will definitely write in the comments that you had a breakdown.

That's all. So far!