CDSP Card Program. Programs for cutting chipboard

If we talk about sawing wood-sheet programs (chipboard), i.e., many programs cutting sheets of wood chipboard, you can apply "Pro100 cutting".

In a furniture business, a fairly important role is played by the program of sawing sheets of a chipboard, because the correct sawing of the sheets of a chipboard is one of the most important qualities, in the manufacture of furniture.

Book Crack LDSP now! ...

It is not difficult to determine the quality of cutting: if there are no chippers on the blanks, it can be concluded that the cut is made as it should. In the furniture business, much attention is paid to the cutting of sheet materials. Products made of chipboards are not very good, if there are traces of sawing on the visible side.

For today, everything is automated in the furniture workshops. For example, a number of machines are used on production, which are quite successfully coping with this task. These include equipment of the type of formatorship, additive and edge-bullshit machines.

To cut the chipboard soon, the specialists use the cutting program, such as Pro100 cutting.

Pay attention to the sawing sheets of the wood chipboard on the Festool cutting machine. If you take, let's say, LDSP, then it is better to use a format cutting machine, as it is convenient to cut down the LDSP (you can write down from hundred sheets per day). As for the pricing policy, it depends on the company that offers this service.

For cutting sheets of wood chipboard, you can also use the Festool immersion saw. It is not a very expensive option. Due to the fact that the above-mentioned saw is not bad ratios in the price category + quality, this option is popular. There is also the following programs Cutting the chipboard for which you cost to pay attention.

Consider them in more detail:

"Basis-cutting" They are unique, modern programs, with a visual and understandable interface and has a powerful mathematical algorithm for the optimal cutting of any materials used on furniture production. These Basis-cutting programs are included in the complex-furniture complex.

The next breakfast program, which is also popular - Cutting.. It is intended to optimally cut the material on the details, depending on which it is necessary. If a rectangular item is needed, this program will help make such a detail if the linear one is needed, the linear is separated. This program is used not only for woodworking, but also for the production of furniture, metal cutting, and so on. Thanks to the high-grade algorithm that is in the program, cutting with minimal waste.

One more interesting program Cut is a program Astra-D.. It is intended for the purpose of the automated cutting of the chipboard. Also, it is used with strollers and other materials, such as plastic, glass, metal and others. In addition, the Astra-D program improves efficiency and reduces the time that is spent when the cutting card is formed. The program is designed for operational windows systems. The user will be able to master the work in this program and simply understand the menu system.

Now consider the program Bestcut.. This program facilitates the tasks that are associated with the sawing of the chipboard, the calculations of the price of materials and work. With its help, you can get a scheme for cutting a wood chipboard and equipment that will be used with this procedure. Also, this program will allow you to get accurate cards of cutting sheets of wood chipboard to rectangular parts. Not an unimportant fact is also what the features of which will have to face in the process of processing sheets of wood-chipboard are taken into account. Work can be supported through local network, and this is also convenient enough.

For the cutting chipboard, it is recommended to draw your attention to the Astra utility to cut and download it. This is an excellent application that copes excellently with all its functions and options. At the same time, the program is different from our usual service and office applications. If you download Astra free, you should know that the software is designed to work in companies engaged in the manufacture of furniture to order. On medium and small enterprises free software For cutting chipboard will be indispensable.

Question may arise: why it is required to download a program for the cutting of the chipboard, because it is not very difficult to cut the sheets for construction decorative designs, most importantly, have certain skills in this work. In principle, there is a certain meaning here, but only in case of one-time work. However, professional users who work with such materials are constantly, free Astra Utility will simply need.

To the number functional features This application refers to the fact that the Software Software software allows you to work with a whole order in which there are many products that, in turn, consist of a certain number of parts. If you download the program for free, then you can keep your own spare parts, products and details library. Such a function will be very useful for all users, especially if buyers choose to order typical parts consisting of standard spare parts. In addition, it is possible to end-cutting the warehouse of materials, in which case the sheets of the chipboard remaining after work are sent to the warehouse to perform the next order.

Excellent program cutting chipboard download free Astra cutting

Just just free download the Astra Cutting program to cut the chipboard to generate all the necessary cutting cards in automatic mode. Naturally, the program takes into account all the organizational and technological parameters of the order, for example, the minimum distance between the saws, the type of cutting, the accounting of through materials, trimming the edge of the sheet, the width of the cut and much more. If necessary, users can easily make certain adjustments without any problems, because for this there is a special editor of the DSP cutting card.

Another positive quality this application It is that the Astra is cutting can be used to calculate and analyze the production of edges of the material regardless of its nature. Accordingly, if you download software, you can get all the information regarding the production of furniture, cuts or grinding glass, as well as cutting edges for subsequent welding.

It is possible to cut the sheet material and manually, but it takes a lot of time and special skills. It is much easier to do this by using related programs. They will help optimize the cutting card, will offer other options for location and allow it to edit it yourself. In this article, we picked up for you several representatives who perfectly cope with their task.

Astra cut out allows you to work with orders, importing their billets from the catalog. In the trial version of the templates, only a few, but their list will expand after the license is purchased. The user manually generates a sheet and adds items to the project, after which the software automatically creates an optimized cutting card. It opens in the editor, where it is available for change.

Astra S-Nesting

The following representative differs from the previous one that offers only the main set of functions and tools. In addition, you can add only pre-prepared details of certain formats. Card cutting will appear only after purchase full version Astra S-Nesting. In addition, there are several types of reports that are formed automatically and can immediately be printed.

Plaz5

Plaz5 is obsolete software, no longer supported by the developer, but this does not prevent him from qualitatively perform his task. The program is quite easy to use, does not require any special knowledge or skills. The cutting card is created quickly enough, and from the user you only need to specify the parameters of parts, sheets and make the design of the card.

Orion.

The last on our list will be ORION. The program is implemented as multiple tables in which the necessary informationAnd after the maximum optimized cutting card is created. Of additional features There is only an opportunity to add an edge. Orion applies for a fee, and trial version Available for download on the official website of the developers.

Cutting sheet material is a rather complicated and time consuming process, but this is if not to use a special software. Thanks to the programs that we have reviewed in this article, the process of drawing up the formation card will not take much time, and the user needs to make a minimum amount of effort.

Cutting - a program for cutting sheet materials: wood chipboard, glass, etc. The DSP cutting program makes it possible to reduce and optimize the consumption of the material, it makes accounting for waste, including "business", which are not taken into account when calculating the order value. The utility can be used in enterprises engaged in the mass production of cabinet furniture, for this in its functionality, the concept of order has been introduced. All executed orders are automatically recorded in the order base, subsequently it is possible to repeat or change them. Download free Cutting You can on this site.

To start working with the utility, you need to set the size of the sheet and parts that will be cut out of it. Next, the program will independently select the optimal version of the cutting with the lowest amount of waste. If necessary, you can use the database of materials available in the program, in which the standard dimensions of sheets or rolls are laid. In this case, it is enough to specify the material for cutting, and the utility will automatically make a calculation according to the standard sheet parameters.

The program for cutting works on two basic algorithms for optimizing the DSC flow rate - a decrease in overall waste and an increase in continuous cropping. A decrease in overall waste involves cutting with a minimum amount of cropping. The mode of increasing continuous trimming, in addition to reducing waste, is used to create maximum trimming, which can then be used for another order. You can also save on the material by combining two orders if the same material is used for them.

The main advantages of the utility cutting

Two cutting optimization algorithm.
Database of standard sheet size.
Work with two types of edges.
Work with both sheets and rolls.
Database of completed orders.

During the cutting, all the cuts are produced from one edge of the sheet to another - either horizontally, or vertically. The material consumed on the cut and other technological operations is taken into account when calculating the cutting. The utility allows you to work with two variety of edges. The program allows you to optimize the consumption of not only sheets, but also rolls. If necessary, it is possible to use the cutting in the network mode.

At first I used the Cutting 2 program, then Cutting 3. They differ quite strongly. But the version of Cutting 2 I liked more. In the third version there are additional featureswhich by and large is not very necessary for small production. Cutting 2 and now helps me in the preliminary calculation of the amount of material and the length of the cut line for large orders, such as the kitchen. To create a final cutting card, I use the NOWY ROZKRój (Cut Optimiser or New Cut Manager) program from the creators of the PRO100 program. . Both sites can be switched to Russian and familiarize yourself with the description of the programs. And now I will describe the uncomplicated process of creating carding cards. .

Open any project created by us in Pro100. Click on the σ tab.

The table opened will reflect the table in which all project elements will be indicated with their characteristics. At the bottom of the window we find the Copy All tab.

Click on it. Now we can insert a table with our elements in the list of parts in Cutting 2. But we need only elements of the main material, let's say the chipboard thickness18 mm. Therefore, open Excel and insert the list of Pro100 elements. Now we allocate those lines in which the elements are not 16 mmi remove them. As a result, there remains a table consisting of 4 columns, in one of which in all cells only number 18. We allocate and delete this column. The remaining items allocate and copy. Run the Cutting program 2. Details table on the right.

If it is not empty, click on the x icon over the right table and confirm the cleaning of the list. Now click on the right key on the first empty list of the list and in the drop-down menu, select the line to add from the clipboard.

Click on the execution icon.

Card cutting ready. You can print and use. But I ran into some inconveniences. For example, numbers are small, the cut line is not clear enough.

People who cried material for me were unhappy with the need to use magnifying glass. But for the preliminary calculation of the cost of the product, the program approached ideally due to the above-described part of parts from Pro100 in Cutting 2.

NOWY ROZKROJ program is a better optimizer.

But all the dimensions of the parts must be administered manually.

The program calculates several cutting options at once.

Depending on what is important to you, you choose your own option. It is more suitable for me with a smaller total long cut line, and someone needs a variant with a smaller number of cropping (trash).

First, in the settings, I specify the option of cutting without a strip,

which allows you to place a greater number of details. After the first attempt to cut, I see a lot free space It remains on the last sheet. If more than 30% are not occupied by the details, then in the program parameters, I specify the version of the horizontal

and launch the final calculation. The remaining horizontal bandwidth of the material of the material seller leaves itself, which reduces the cost of furniture. Calling cards created by Nowy Rozkroj program are sufficiently detailed and distinct, dimensions are displayed perfectly.

The result of cutting can be different. For example, you made the optimal cut when an option without a strip, and you have 3 sheets and 3 details. This is especially important if this color of the material seller does not sell the stripe, but only a sheet. In this case, apply the following option:

When adding each part, remove the mark in the table properties table on the structure position.

Then, looking at your project, go through the detail and mark the structure in detail, the structure on which can only be aware of the design, i.e. Other structural options on these parts are not acceptable. If this method does not help, then reduce the size of hidden parts, such as grounds and connecting strips, 10, or more, mm. But do not overdo it.

There is another important plus from this program. If you marked the edge on any side of the part, then it will not eat from this side to another when you turn the part with the optimizer, which can happen in other programs. In the event that the end edge is paper, the dimensions of the parts remain the same as in the project, and if the PVC edge is 1-2 mm thick, then do not forget to take away from the size of the adjacent side with the edge thickness of the edge.

Example of cutting cards

At the beginning of the roller, until the start of the program of Nowy Rozkró, do not pay attention. And then all on the topic. A small technical hitch.

If your sheet, for example, 2800 at 2070, and trimming on the side of 10 mm, forgetting that 4 mm is needed on the cutting, you specify the size of the part 2790 to 600 with the edge of 2790. As a result, the edge slides on 600. Please note This is attention. I once did not check the card and gave it to work. First, the guys suffered when the edge was glued to the side 600, because The detail rested in the door of the workshop, had to move the machine. No one thought that the distance from the machine to the wall 2.5 m may be ever sufficient. And secondly, I had to pay for me to shove the edge along the long side, and at that moment I did not count on it. Therefore, be careful.

The error with which you may encounter when drawing up carding cards