Windows 7 is launched on a laptop. Why not boot windows? Ways to eliminate the problem

Friends, many of you more than once have problems with the operation of the operating system and you asked the question how to restore the download of Windows 7 and make to operating system Loaded normally. In this article, we consider the most common ways to restore windows bootloader 7, which help in most cases.

1. Restore Windows 7 download using the recovery tool

Load with your windows version 7. The main thing is to coincide the size of the system (32-bit or 64-bit). Also, it is desirable to match the release (Home, Professional, Ultimate).

Instead of installation, select "System Restore".

Get to the "System Recovery Settings" window and select the Run Repair Tool.

After that, the recovery program will search for errors in the boot sector and the Windows 7 boot section and when detected will try to correct them. After that, the system is restarted and the Windows 7 may be loaded normally.

If the first time was not able to restore the download using the tool windows restoration 7, then try to repeat this process another 1-2 times. It often helps, since the recovery means cannot always eliminate several problems in one pass.

2. Restoring Windows 7 download using the command line

If you failed to restore the download of Windows 7 using the automatic recovery tool, then try to do this using the command line. Load from your version of Windows 7 and instead of installation, select "System Restore".

Get to the "System Recovery Settings" window and select the "Command Line" recovery tool.

After that, a window with a black background appears in which you will need to write several commands.

Enter the following commands in turn:

bootrec / fixmbr

bootRec / FixBoot

bootSect / NT60 All / Force / MBR

eXIT

Language switching is performed by combining the "ALT" + "SHIFT" keys. After entering each command (string) you need to press the Enter key.

Then restart the computer.

After that, in most cases, the problems associated with the boot sector and the Windows 7 bootloader will disappear and the operating system will be loaded normally.

If after using the command line, Windows 7 is still not loaded, then try to use again automatic tool Loading, as we considered above.

3. Restoring Windows 7 boot with reinstalling system

If you failed to restore the operation of the operating system described above in the methods, then most likely will have to remove partitions.

Before reinstalling Windows 7, copy all the most important files for you with hard disk on or. This can be done with any bootable disk LiveCD.. Note that the external disk or flash drive must be connected to the PC before loading from LiveCD, otherwise they may not find it.

If, due to the download errors, you cannot reinstall Windows 7, then delete all partitions from the disk using a third-party utility, for example, the boot disk Acronis Disk Director. After that, try again with the creation of new sections.

If when re windows installation 7 At the disc configuration stage (Creating partitions, Selecting the section for installation) or when you restart the computer during installation, you will have former download errors, then run the command line and execute the commands that we have considered above.

Errors when using disk utilities

Incorrect activators

Installing Windows to the existing section along with the loader

In order to prevent problems with downloading in the future, you need to determine what exactly led to the problem and not repeat these errors. If you can't restore Windows loading, other errors with the installation and operation of the system appear, refer to the site http://esate.ru where you will find the instructions for solving various problems with the operating system.

ASP900S3 75E120BW F120GBLSB.
SSDSC2BW240H601 75E250BW SSDSC2BW240A4K5 7KE256BW

If the user has a problem when Windows 7 does not start in the computer or laptop, then this article will help solve this difficult task. The launch of Windows 7 is sometimes impossible due to occurring errors in the system after hardware problems, incorrectly installed software, malicious utilities, etc.

But the most common reason why Windows 7 does not load, lies in the operating system itself.

Solution to the problem

In the case when all initial stages launch windows 7 In a PC or in a laptop, it is performed normally, and still Windows 7 is not started to the end, then usually beginner users it puts in a dead end. Although if presence detailed instructions, Question: "What to do?" Even newbies will not appear. If the problem is a hardware failure, then it will indicate a laptop speaker signal or stationary computer With post test. If so, then start the OR will fail.

But if a software problem and the process stops at the Windows loading phase 7, then the user has encountered the most common problem solved using the typical action algorithm.

Instructions for action

You must use the OS recovery tool. During the PC launch process, if Windows 7 does not start, the system often recommends the owner of the computer or laptop to select download options. If for some reason this offer has not been received, the user can independently open this menu click on the "F8" button. Then proceed to the "seven".

What if the above instruction did not cope with the problem?

To eliminate the problem when Windows 7 does not start, you must apply the CD from OS:

1. Install the installation disk in the PC drive;
2. Run the system from the disk (in the bio d b. The corresponding order of loading system from media is installed);
3. In the displayed window, click on "Apply restoring functions that eliminate problems with the loading of OS" and click on "Next";
4. Then in the OS Recovery Settings menu, click on the "Start Restore";
5. Wait until the time analysis of the system and eliminate the causes of failures;
6. Perform a reboot of a PC;
7. In the BIOS, set the system starting from the hard disk ( when leaving the BIOS, you must save the adjusted adjustments.);
8. Reboot the computer again;
9. Ready! Now Windows 7 will boot normally.

Using the command line

If for some reason I could not restore Windows using the setting disk, then there is another way to do through the command line.

First you need to do the steps specified in the paragraph about the restoration of the normal download "Seven". Changes are only that simply in the menu now you need to specify the section - "Command Line".

What to do when it was not possible to achieve a positive result by executing the above instructions?

If you could not succeed and the user has already reached this part of the article, it means that the problem cannot be attributed to the category of typical failures boot distribution OS. It will take all further actions to do in safe mode WINDOVS. It is recommended to analyze the disk "C" for the appearance of broken clusters.

To enter the "Safe Mode" you need to do the following:

Why are preventive measures important?

The Windows 7 provides a special system that can make special reference points, with which, if necessary, restores. Applying this feature of protection, even the user is always happy to return the OS to a working condition.

For example, in case of failures due to the incorrect installation of applications, drivers and other utilities like codecs or when errors occur due to making adjustments to the registry.

It should be noted that in the "seven" it is possible to drive a fixed amount of memory on the hard drive specifically for such protection of the OS. In Windows 7 available exercise self-configuration Protection Along with system data also files or you can do it separately.

Need a good advice how to produce windows 7 boot recoveryIf the start-up recovery using the seven installation disk does not help. In short, I will explain what the case is: on the computer, Windows 7 was installed on the computer, then Windows XP was needed by the second system, after installation it was naturally launched one, for downloading two operating systems used EasyBCD program. In the future, XP has not needed and the section on which it was located I formatted from Windows 7. Now, when loading, except for the black screen, nothing. What can be taken in this case? In more detail if you can. Sergey.

Windows 7 boot recovery

Hi friends! Most importantly, do not worry, you have a simple problem and in principle a simple means "Restoration windows startup 7 "The article described in our article should help, but! If this article does not help you, then the other two should help:

these articles described several more good ways Restore the download of your operating system, besides them there is one more, so try and just do not give up so much.

Let me remind you that you cannot install the older operating system after younger, Windows 7 will not be downloaded after installation on windows computer XP, since the latter when installing rewrites the main boot record (MBR) on itself. Therefore, you installed an additional download manager that is used to set up the download of several operating systems and has its own bootloader.

1. I also want to say that often in the unsuccessful download of Windows 7 to blame file SystemYou can fix them even if the operating system is not loaded, all the details in the other article " "
2. Friends, in this article we will work with the Windows 7 recovery environment, and more precisely with command line Recovery environment. I will give you the necessary teams, but if it is difficult for you to remember, you can. It greatly facilitates your work.

• The main boot record (MBR) is the first sector on the hard disk in which the partition table is located and a small program loader, which reads the data from which partition of the hard disk to load the OS, in the future information is transmitted to the section with the operating system installed, For its download. If in main boot record There is incorrect information about the location of the system, it means that we get different errors when loading, here is one of them "bootmgr is missing press CTR-ALT-Del for Restart" or will observe a black screen. Corrected problem windows 7 bootloader restoring.

When you removed an XP old woman with EasyBCD, then left your computer to the arbitrariness of fate with an incomprehensible boot record and he gives you a black screen as a sign of gratitude. To correct the situation, we will spend restoration of the progresszikychik Windows 7, namely I restarts the main boot record using the bootrec.exe utility located on the recovery disk or on the installation windows disk 7 (friends, if you have a netbook and you want to use the recovery environment located on the flash drive, then read the comments first). Also this utility we will write down the new boot sector, understandable Windows 7.

Windows 7 boot recovery automatically

Loading from the recovery disk or installation disk with Windows 7, in the initial phase of the computer loading, when you appear a sentence to boot from the "Press Any Key to Boot from CD ..." disk, click within 5 seconds on any keyboard key, otherwise you do not boot from the disk

There is a short search for installed windows systems and analysis of problems that interfer them

Typically, problems are quickly found and the recovery environment proposes to eliminate them automatically. Click the "Fit and Restart" button, after that the computer will restart and download Windows 7 will be restored.

If the system download problems continue or you will not be prompted to correct the problems automatically, it means that you need to select the operating system that you want to restore, it is most likely one and next.

First select a toolLaunch restorationIt can also solve problems with downloading Windows 7

Windows 7 bootload recovery manually

If this means does not help, choose a tool Command line

We enter the commands:

diskpart.

lIS VOL (We see a list of partitions of a hard disk and see that "Volume 1" is a hidden section of the System Reserved (reserved by the system), the volume of 100 MB, the Windows 7 download files should be positioned on it and it is necessary to make it active). We also see a section with installed Windows 7, it has a letter D: Volume of 60 GB.

sEL VOL 1 (choose Volume 1)

aCTIV (make it active)

eXIT (exit from diskpart)

bCDBoot D: \\ Windows (where D: section with installed Windows 7), this command restores Windows 7 download files (BootMGR file and download storage configuration files (BCD))!

"Download files successfully created"

Windows 7 loader recovery manually (Method No. 2)

In the command line window, enter the BootRec and Enter command.

complete full information about the possibilities of the utility. Select the BootRec.exe / FixMBr's main boot record entry.

The operation has been successfully completed. In the first sector boot section A new boot record is recorded.
The second bootrec.exe / fixboot command writes a new boot sector.

The operation has been successfully completed. Exit. Next, we try to download our Windows 7.

Friends if the bootrec.exe / fixmboot commands and bootrec.exe / fixboot do not help you, do not despair, there is another means.

Method number 3.

We enter the command Bootrec / Scanos.She scanches all your hard drives and sections for operating systems and if such are found, the appropriate warning will be released. Then you need to enter a command BootRec.exe / RebuildBCD.This utility will offer to deposit Windows found in the download menu, agree and enter Y and click Enter, all of the Windows found has been added to the download menu.

In my case, two operating systems were found. Everything can be seen on the symbol.

In addition to the above method, there is one more, enter the BootSect / NT60 SYS on the command line, the main boot code will also be updated.

EXIT

So, the error is that we have on both hard drives should be marked with the red flag first hidden sections System Reserved (reserved by the system). On Windows 7, the volume of such partition is 100 MB, and on Windows 8 350 MB, exactly these sections are attributed: System. Active And it is on these sections that the download storage configuration files (BCD) and the system load manager file (BOOTMGR file) are located. And we turn out these attributes are other sections. Because of this, Windows 7 and Windows 8 are not loaded.

Select the first hard disk 1, click on the first section of the System Reserved (reserved by the system) with the right mouse and choose "Mark as active"

Tom "reserved by the system" will be marked as active. Click OK.

Doing the same with the disk 2. The Acronis Disk Director program works in a deferred operation mode so that the changes take into force click the "Apply Waiting Operations" button

Proceed.

As you can see, after our changes, those sections needed were active.

We leave the program and reboot. The result of the work is positive - both operating systems are alternately loaded.

The topic I want to discuss in this article is very popular and tell about it in detail so that you understand how and what to do is not so simple. But still, I will try to describe possible methodsWhat to do if Windows 7 is not loaded on a laptop or computer. We will also find out why it could happen?! The task is not from the lungs, namely, to fix the current situation, but do not be afraid. Just follow the clear instructions, and everything will be fine! Some moments may approach other operating systems, but the focus will do for Windows 7.

Dear reader, if you really want to solve the problem, I strongly recommend reading to become completely, and then do some conclusions. I can not tell about all the nuances in one paragraph.

Safe Mode and Last Successful Configuration

It is necessary to try it! Reboot the computer, click the F8 key continuously.

Attention! In Windows 8, the input to the safe mode occurs a little differently, and therefore it is better to click on the link below to find out all the details. In the list that appears, we are interested in the item called "Last Successful Configuration (Advanced)". Select and press ENTER.

About how to enter safe mode in different systems:

What to do if you did not help the information above? We repeat the actions described in the previous paragraph, but I already choose the "Safe Mode" ("SAFE MODE").

Next, you can make a choice: Fix the problem because of which Windows 7 is not loaded manually or try to do it in semi-automatic mode. Usually, I do everything manually, for example, if Windows does not load after installing the drivers, I delete the drivers and try to boot. I think you understand that a manual way requires more knowledge from you, so Windows offers you another option that I will describe below.

If everything is loaded, we go to the "Start" menu, "Control Panel", "System and Security". In the "Support Center" tab, click on the inscription "Restore the preceding state of the computer". See the "Start Recovery System" button? Excellent, it means you went where it is necessary.

And now, click it and follow the instructions.

Next you need to choose a recovery point. In my case, I propose to choose a point of the 23rd number, and now on the calendar 29 number. Therefore, you need to click on "search for affected programs" to find out what actions you need to do after recovery.

So you got acquainted with the affected software When restoring the system and now you can close this window. After closing the window, click "Next".

If you could not go to a secure mode to restore windows work, it is not necessary to despair. Just below, we will analyze another way.

Note: At the very beginning, when only Windows 7 was published, there was one strange glitch that could be with you. When you turn on the computer, the welcome screen and the black screen appears. As I remember, it seems to be an arrow, but nothing more could be seen. It was treated very simple - go to the safe mode and reboot the computer as usual. After that, I managed to go to my account Without any additional manipulations with Windows.

It is possible to reinstall Windows

This option must be viewed when you tried to revive Windows, but all attempts have not been delivered results.

The very first thing that comes to the mind of many, and I, too, is reinstalling Windows 7. No. this methodAgree, very long, and if you are a busy person, then access to the computer should be practically permanent. Reinstalling is suitable for those who have a lot of free time, or there is no time to understand in faster methods, or those who will not help any of the Windows operating system to restore the Windows operating system.

I will not stop at the installation in detail, since I wrote about it on my blog:

Here brief instructions: since you do not have access to the desktop, go to the BIOS, looking for the Boot or Advanced Bios Features tab or search for yourself. Then we find the string "1st Boot Device.", Install the CD-ROM value. What did we do? And we made that now the computer will now be downloaded from the disk, which is installed in your CDROM, and not from the hard disk. After switching on, when the inscription appears on a black background: "Press Any Key ...", press any button and get to the Windows Installation Wizard. Next, follow the instructions on the screen.

Read more about how to make a download from the disk you can read in my article: "".

I decided to tell about the installation at the very beginning, because if you were going to reinstall Windows, then perhaps this is a sign to implement it))). But as I said at the very beginning, we will now try to return your Windows to life without reinstalling it.

System Restore

First of all, you can use the feature that is in the installation disk "System Restore". I will give an example of the Windows 7 system, but if you have another system, then this is not a reason to think that you can not do in your system. The names of the buttons may differ, but the principle remains.

So, for this procedure, we need a Windows installation disk or an image (you can download on the Internet). If you do not have the opportunity to download the image or no disk, then email me [Email Protected] Or refer to your friends who have already installed Windows independently.

If you do not have a working drive, or it is not at all, then the article "" will help to create a bootable flash drive.

When you have a Windows distribution kit, then insert it into the drive and restart the computer. If the BIOS is configured to install, then you will have a string:

When it appears, press any key.

In the event that if it is not or Windows is loaded as usual, then you need to make manipulations in the BIOS. Namely to set up loading priorities. Usually in the BIOS settings hDDSince it is on it that your Windows is installed.

In order for the computer to start booting from a disk, which is in your drive, you need to go to the BIOS and specify the CDROM as the first download device. I have already told about it above if you have not read this moment, then it's time to do it.

So you pressed any key, the window will now appear where you click "Next".

In the next window, you need to click "Restoring System".

Becoming a search installed systems. If you have one system installed, respectively, there will be one operating system in the list. Select it and click "Next".

Completely at this stage a message can appear in which you will be asked to restore the system. If this message is displayed on your screen, click "Fix and restart". After that, try to go to your account.

If the message does not appear, then in the next window you choose your system and click "Next".

After that, a window will appear where you can select the system recovery methods.

– automatic solution Problems.

System Restore -you can use this method, but provided that this function has been turned on.

Restoring the image image -if you have a Windows image to restore.

Command line - You can revive Windows using specific commands. This method will be further reviewed.

And now click "Start Restore". Now we need to wait a bit so that the utility will try to automatically find the problem and solve it.

Restoring the system via the command line

Then enter and click ENTER.

A list of commands that can be used in this utility will appear, now you need to enter: Bootrec.exe / fixmbr.and press ENTER.

Now enter . eXE / , after which clicks on ENTER. Next, we leave from the utility by typing Exit and pressing ENTER. Now you can try to boot into your account, as restoration work is completed.

You can also try to update the boot code by entering the command. bootSect / NT60 SYS.Then leave the team Exit.

If you did not help the above commands, then go to the command line and enter BootRec.exe / RebuildBCD.With this command, you make a hard disk scan to find the systems installed in it.

When scanning is over, a list of installed operating systems on your hard disk will appear. To add it to the download list, click Y.and ENTER. After successfully completing the operation, enter EXITand press ENTER.

So, with the command line, we figured out. In principle, this should help your system begun to load.

Inactive hard disk section

This situation is not often found, but still it is necessary to tell about it, otherwise the article can be said to be circumcised. Let's give an example, after which you will understand what's what.

Suppose you have several Windows operating systems installed on different hard drives. If the sections hard disks Assign Incorrect Attributes, you will have problems downloading a particular version of Windows.

To check or fix it, you can use Acronis Disk Director's boot disk to change the partition attributes. So download and write down boot disk Acronis Disk Director and boot from it. How to do it? Insert the disk into the drive, restart the computer, and boots from the disk, which is in the drive. But before this, check the priorities of the download. There must be a CDROM, as when installing Windows. We have already spoken about this in this article above.

When the program is loaded, pay attention to the checkboxes that are on the hard disk sections.

In the image above, we see that the checkboxes are on the second sections of the hard disk. You need to make these flags be on the first sections. We got to practice;). You need to click on each first partition section of the hard disk with the right mouse button and choose "Mark as Active".

A message should appear where you click "OK". This is what it looks like after the entire procedure:

Now it remains to click on the "Run" checkbox, wait for the operation and restart the computer. Do not forget to remove the disk from the drive.

Hardware problems, BIOS and viruses

HDD. If yours system unitMore precisely, the hard disk makes suspicious sounds: clicks or tapping, that is, the probability that you need to replace the hard disk. To make sure that you need to open the system block cover, turn on the computer and listen to hard work disk. Also check the wire connection with hard disk. It is possible that the wires are disconnected, and the computer does not see the hard drive.

If there are suspicion that the problem with a hard disk, then you need to copy all the important data to another medium. Otherwise you can lose them altogether.

Bios.. Go to bIOS settings And put the hard disk in the first place so that loading starts from it. Above we disassemble the example when CDROM exhibited, just do with a hard disk. Just do not forget to save the changes to the BIOS by clicking on the F10 key.

The second way - you will not believe, but it works in the truth! Just go to the BIOS and, without changing anything there, leave, retaining the changes that I did not have (pressing the F10 button). I personally so once fixed the laptop to friends, and when they asked me, as I did, my answer was: "Magic and nothing more 😉." So try, suddenly everything will be much easier than you think.

Viruses. Sometimes viruses do not allow Windows to boot. If you have viruses on your computer, then you need to check the entire disk for viruses. Here are the articles that you will be useful: "" and "".

Of course, if you check your hard drive for viruses, you will need to disconnect it and connect to another computer, as you do not have Windows. Or you can take advantage of special boot programsWith which you can check your computer to viruses even if you cannot download your Windows. Here is a couple of them: and.

Attention! There are cases when after installing updates stopped downloading Windows 7! Therefore, you can try to delete recent updates that have been installed before Windows downloads appeared.

Important!If you have any definite error on the screen, I recommend using searching for Google or Yandex. You can enter not only the error code, but also the words that are used in it. Thus, you will save your time to find a problem and solutions.

Important! If the system unit publishes pisks when turned on, then it is necessary to determine the problem on this page. Ask how? Here is the article on this topic: ""

That's all I wanted to say. The article turned out to be big, and I sincerely hope that you have helped you at least one of the ways by me.

Much says superfluous, but for you there is useful information:

One of the worst troubles that may happen to your computer or laptop with installed windows 7 Windows 8 Windows 8.1 or Windows 10 - download failure. Then you definitely need to start the Run Repair Tool.

Well, if you have a saved recovery point, then you can often run a computer or laptop in safe mode and make a rollback.

That's just if Windows 7 does not start, then the startup recovery is most often possible to do, moreover, Windows 7 starts the start recovery independently.

With Windows 10 this option will not roll. In it, the recovery points and even secure mode are disabled by default, and no one does not include them and does not even suspect it.

Very often restoring startup when download windows 7 May go for a very long time, one can say constantly to infinity and there will be no result. If the work is rush, then panic and the hassle is completely and near for a long time.

What to do if the automatic trigger error problem does not solve, and the endless recovery is only annoying. Can bios help? Maybe if there is no disk flash drive? These questions are the answer below

As when Windows 7 fails to restore

So, you turn on a computer or laptop with Windows 7, and they are not loaded. Usually, after that, automatic startup recovery starts to start and spinning to infinity.

This is because the system is looking for a recovery point, but does not find it and always trying to try again. Turn off. Nothing will not work if it did not work the first time.

In order for the problem to eliminate you the unaware disk, which naturally you do not have. If this is not a night, and you have a high-speed Internet, then the situation is corrected.

Download Windows 7 on the Internet, only necessarily that bit that is installed with you. Damn the trouble, which I did not think about. How to download If your computer or laptop does not start.

Yes, if the PC is only one and there is no possibility to download you need to go to friends, otherwise in no way. We will consider - downloaded. Next, you need a disk or flash drive so that downloaded windows 7 write.

How to write down, I will not describe in the network hundreds of instructions including video. If all is ready to change the BIOS settings to download from a flash drive or disk and proceed to the installation.

When installing, we get to the place when you see the restoration of the system. Figure below.

Click on it. The system will search and find your OS

Now, as you see in the figure, select the startup recovery and wait until the system restore it.

it the best way exit such a critical situation. And what to do if there is no disk from the OS.

Another option to restore the launch

If there is no disc from the recorded OS, but maybe you have a friend who has a computer or laptop working on Windows 7 of the same bit as you.

Then go to him, on the way, buy clean DVD Disc And when you come with a friend's PC, make a recovery disk.

How to describe also I will not, and then the book will turn out. In the network will find. After that, coming home can restore the launch of your PC.

Launch Restore on Windows 10

On Windows 10, the option is also suitable above, but do not rush. Although by default, the safe mode is disabled in it, it is still possible to turn it on.

To do this, you will need three times in a row to disable your laptop or computer.

As soon as you see the logo, you immediately turn off, you can even de-energize if it does not work buttons.

For the fourth time you have to see the screen with different download options. Only here again the problem is obtained.

In version 10 automatic creation Recovery points are disabled, and you naturally did not turn it on it.

Then you have only one option. Run PCs in safe mode and try to remove errors in manual mode.

Remember that the last installed and delete. You can also apply programs correcting errors. In a word, eliminate problems.

There is another option. This is the use of a disk Life SD. In this case, you will have the opportunity to rule the registry, and this is if only users understand that, do.

On the network how to do this to find descriptions is easy. I will not affect them here and I wrote almost a brochure already. Successes.

Categories: Uncategorized