Attention! Broken Touch ID kills the iPhone battery.

Touch ID - what it is and how to use this issue. This question is sooner or later apple's owners are asked.

Modem mode on iPhone 6 and iPhone 7: how to enable and configure - step-by-step instruction 2017.

Advantages of technology

Among the advantages that the Touch ID provides, it should be noted:

high response rate due to the minimum number of operations;
complete confidentiality important information, access to which only the owner of the device can receive;
the ability to authorize the user in a number of applications. To date, a lot of programs support work with technology. For example, 1Password password repository, DayOne diaries and service file manager Documents;
use mobile gadgets instead bank cards When paying purchases.

Fig. 2. Purchase payment aid iPhone.

Setting up Touch ID

The technology does not provide the user with the ability to quickly enable all its functions - on the new, it is not activated only by the purchased phone.

And in order to complete the initial setting mobile phone or tablet should perform certain actions:

Wipe button Home. and their fingers to avoid the distortion of prints in the process of their identification;
Enter a password that can be used if you unlock the device using Touch ID for some reason it does not work. The password request occurs in 2 days after the last unlocking occurred;
Taking the device as well as with the usual use of a smartphone or tablet, attach a finger to the Home button;
Holding your hand in the same position, wait for a light vibration of a device or sound, which are the completion signal of the first setting step.

After that, the gadget can only be unlocked by a person who has spent tuning.

Access can be obtained by outputting a smartphone or a tablet from sleep mode (by pressing one of the buttons on the housing) and the end of the touch to the sensor.

Fig. 3. To access iPhone, it is enough to press the HOME button with your finger.

You may be interested:

Authorization in services

Identification in services and programs using the Touch ID is configured as follows:

The settings section of the smartphone (tablet) opens;
Select the "Touch ID and Password" item;
Announced subparagraph "iTunes Store, App Store.».

After that, the IOS operating system downloads the necessary additions to the device and reports the need for additional authorization.

The fingerprint identification procedure is given separately for each of the applications to enter the Touch ID to enter.

Although the time to set is needed less. By the way, you can read us on the site how to distribute the Internet from the phone.

Problems using

Despite the fact that the technology of access to makes them use more convenient, sometimes problems with the entrance to the operating system arise.

The main causes of the appearance of only three:

pillow of a finger or the button itself is dirty. The question is solved by a thorough cleaning of the surface of the sensor and hands;
problems with software. To avoid them, you should provide authorization using the image of two fingers at once. If it did not work out before the appearance of a malfunction, the situation is corrected, giving the device to the service for flashing;
factory marriage - the reason is not too frequent, but also encountered. The sign of the problem is the complete absence of a reaction to the touch of the finger to the Home button and the impossibility of rebooting the smartphone. In this case, the phone is also required to be attributed to the service center.

Fig. 4. Dirty button - one of the causes of incorrect scanning.

Problems with the work settings of the technology are compensated by its capabilities. Such as speed and ease of work, optimization of payment processes and no need to memorize a password. And the problems arise quite rarely.

How to improve work touch ID

This option is present in most apple devices, starting with the seventh generation, but not many users know how to configure technology correctly and solve problems with it.

In all current models, starting with iPhone 5S, you can detect such a function as Touch ID. Many do not use it and do not even know what it is at all.

Therefore, today I will tell you why you need to use Touch ID on my iPhone and what it gives.

Touch ID function on iPhone

I want to start the story of this feature with the fact that it appeared in the distant 2013 together with the legendary iPhone 5S. Then the letter S meant "Security", which was implemented using Touch ID

This is a fingerprint scanner in Apple devices, which is built directly to the Home button. With it, most often you can unlock your smartphone or make purchases.

In the first models, the technology was damp and very often broke. And a big minus is that it is not easy to change it, because the button is tied to the processor of the device.

From the global advantages of use, you can call such advantages:

security of your data after the device loss;
fast unlocking device;
it is convenient to make purchases at any store.

Today we have this technology in version 2.0 and many do not even imagine their lives without it. After all, it is so convenient and quickly you can unlock your gadget.

How to configure Touch ID on iPhone 5S, 6, 6S, 6 Plus, 6s Plus, SE, 7, 7 Plus?

Many people think that setting the Touch ID function on the iPhone or iPad super complex. But you should not be afraid of this and now consider the whole process as a whole.

I'll start with the fact that even if you have an old iPhone 5S, then it also makes sense to make this procedure. Therefore, let's start:

go to B. Settings - Touch ID and code password;
see Add a stamp and bring the desired finger to the Home button;
when the scan ended, then we make the same procedure, only with the edges.

Now the imprint has been added and you can add so many fingers as you need. Most often, things are quite enough. After all, you can cut down and so on, but do not forget that there is a password.

In the same menu of this function, you can choose which exactly you want to use this functionality. Options are actually only two:

Unlock iPhone;
iTunes Store and App Store.

There are already purely your preferences. If the first item should be default, then the second is really the need. The second point can be useful for paid games to not enter the password.

As you can see, the Touch ID function is not as terrible. Now you know what it is intended in your device and what it is.

As for the setting, too, everything is simple. Usually Apple is trying to simplify the process as much as possible, so you can always find a bunch of tips, what exactly needs to be done in what order.

Touch ID is a useful and convenient identifier in not only in iPhone but also apple devices. Very often we hear from the owners that does not work Touch ID on iPhone or iPad. In this article we will understand why the fingerprint sensor does not work or shows the notification that the failure has occurred.

Touch ID does not work - what to do

If the touch of Ayidi does not work, or frequent failures are often occurring, we recommend making a restructuring of prints in the device. By the way, the brakes in the triggering of the Touch ID may appear after the iOS update.

Before updating the prints, thoroughly wrap the scanner surface on the iPhone or iPad and even better wash your hands and also carefully wipe them so that they are not wet, greasy and so on.

Go to "Settings".
Enter the Code Password.
Delete previously entered prints (swipes with left rights).
Add fingerprints again.

Optimization operating system Not stopped, Apple engineers will improve and add new opportunities and in connection with this, some data, such as the same fingerprints of the fingers in the Aidi Touch need to be updated.

Why the Touch ID stopped working in the App Store

Often in the store app. Store can also stop working Touch ID. As a rule, such a problem is also associated with software and is a regular failure of work.

If "Touch Ayyi" stopped working in the App Store, follow these steps:

Go to "Settings".
Enter the Touch ID tab and code password.
In the field of functions "Using Touch ID", disconnect the ITunes Store and App Store slider.
Exit "Settings" and restart the device.
Then go again in the "Settings" Next to the tab "Touch ID and Password" tab.
We switch the "iTunes Store and App Store" slider to the active mode.

After the above-mentioned "glitch" with the Touch ID, the App Store should be eliminated.

Touch ID generally stopped working

If you did not help the above instructions then you need - hard Reset.. If there was a programming problem this method It will help to return the performance of the Touch ID. Of course the likelihood that the sensor simply failed, it is impossible to exclude in this case we recommend contacting the service center for help in troubleshooting.

Touch ID stopped working in the winter - what to do

According to statistics and reviews, it is already known that the iPhone / iPad dactyloscopic scanner, it works worse in the winter at low temperatures. This is explained by the fact that because of the cold, a papillar pattern is changing slightly. This change is difficult to notice, the naked eye, but the touch id sensor is a change notes and stops learning a fingerprint.

How to fix if you often have to be in the cold, we recommend adding the same fingerprint but already "winter". Accordingly, you must do this in low temperature conditions so that the touch sensor Aidi remembers the modified imprint in cold conditions.

Why the fingerprint sensor does not always work well

There are situations when your fingers are not quite clean and not quite dry, therefore dirt and moisture can prevent the reading of the print. Here recommendations are exclusively hygiene your hands - use the Touch ID scanner with dry and clean hands.

Did you fail in the work of the print scanner on the iPhone or iPad? Share in the comments by your experience removing glitches with Touch ID

Developers apple companies With iPhone 5S output introduced new feature Touch ID is a device that reads fingerprints. With its help, apple gadget users can easily purchase purchases in the App Store, unlock the phone, etc. Very often on the forums you can find topics about the failed Touch ID.

In this article we will try to figure out, in connection with which the Iyid touch does not work on the 5s / 6 / 6s iPhone and how to fix it?

To begin with, it should be noted that if the device has become buggy after a recent update - most likely will have to make the system rollback and return to former version iOS.

If this method did not help you, it is necessary to resort to the setted options for the package of the Aidi Touch.

Idi Aidi stopped working on iPhone 6 / 6s / 5 / 5s

Mechanical Repair Touch ID - Extreme Measure

What if the Touch ID does not react to any action? In this case, if Aidi's touch failed as a result of a software failure, a rigid system reboot should help. To do this, clamp the HOME and POWER key and hold while the device does not reboot.

If this problem has been programmed - the reboot will solve the problem. If the phone was physically impact - you will have to contact service Centerwhere a qualified master will be able to diagnose and, if necessary, eliminate the problem.

NOT WORK NOTES AIDI on iPhone 6 - repair on your own

If there are small failures in work periodically touch devices ID - Apple developers are advised to reconfigure, in other words, make a new fingerprint and get rid of the old print.

Do it advise periodically so that the printing data in the device is fresh, because Human skin on the hands is constantly subject to various factors, in connection with which the imprint can be changed a little.

In order to make a new imprint, you need to go to "Settings", then select "Touch ID and Password". Remove old prints. After that, click "add a print" and carry out the necessary actions in accordance with the instructions.

In the App Store stopped working on Iyid's touch with iPhone 5S / 6 / 6S / 5

Basically, the cause of this problem is also a little modified fingerprints, as a result of which the system cannot recognize them, but sometimes there are cases when the problem is incorrectly installed by software.

On the forums also complain about the failure, when the App Store does not see the Touch ID. How to fix it?

We go to the gadget settings and are looking for Touch ID and Password;
We find the "Using Touch ID" section and turn off the "App Store, iTunes Store";
Reboot the iOS device;
Return to the Touch ID settings and turn on the "App Store, iTunes Store".

After these actions, the problem should not be.

IPhone 6 problems. Does not run by Iyy's touch in winter, in cold

There are many appeals on the topic of poor performance Touch ID in the cold season. It is very simple to explain the cause of this problem - as a result of the cold, the imprint of our finger is changed slightly, which is why the system cannot recognize it.

In solving this problem will help you frequent update Print or creating a "cold" imprint. Scan your fingerprint, visiting the cold. However, it is believed that these methods assist only in part, however, if there is an urgent need for this function in the cold - it is worth trying.

Because of the effects of water and dirt does not work Touch ID on iPhone 6 / 6S / 5S / 5

Scanner prints touch fingers The id became one of the three main features of the iPhone 5S. At the moment, a technically highly complex device is used in a smartphone for two actions: unlocking the phone and authorization of purchases in the App Store and iTunes Store online stores.

It would seem that the use of the Touch ID in other applications and services, but so far it will not be. Apple refused to provide developers with the opportunity to work with a biometric sensor, and it was not necessary to comment on this solution.

Dactyloscopic module is now only flagship smartphone Apple. However, any iPhone and iPad user, which resolved the jailbreak operation, can easily play the features of the Touch ID. In particular, the option with a password-protected lock screen.

How to mimic fingerprint scanner Touch ID on any iPhone and iPad:

Step 1: Go to Settings -\u003e Main -\u003e Password Protection, if you have iOS 7.0.4, and settings -\u003e password protection, if you have iOS 7.1 and higher. Set the password to unlock the device.

Step 2.: Make a jailbreak using the utility. Instructions for working with the application can be found on our website and.

Step 3.: Go to Cydia and download a free Activator tweak. You can use the search (Search tab).

Step 4.: After the respondment, open Cydia and find the BYPASS tweak, install it.

Step 5.: Go to the Settings menu -\u003e Activator.

Step 6.: Go to "On the Lock Screen" section, find the section "Home" button and go to the "Short Hold" menu.

Step 7.: Check the box next to BYPASS.

It's all. Now lock the iOS device. When you try to unlock the gadget, a standard password input screen will appear. But, if you click and not long to hold the "Home" button, the device will miss Lockscreen and immediately open the desktop iPhone or iPad. You do not even need to first turn on the device screen - it is enough to immediately touch the button. Similarly, the Touch ID scanner works.