The computer writes the problem arose and reboots. Blue Death Screen System_Service_Exception: Solution Methods

Blue screen (He is blue screen of death, Blue Screen., Bsod.) - this is the screen that shows information about the critical errors of the operating windows systems. In Windows 10, as in previous versions, it appears with serious system problems and fatal failures. At the same time on the screen you see the text:
There was a problem on your PC, and it must be reloaded.
We only collect some error information, and then a reboot will be automatically performed.
The blue screen can appear differently: during the download process (until the desktop is displayed or the welcome screen), immediately after logging into the user account, after a certain time interval of the computer (for example, 2 minutes), when starting a certain Programs either spontaneously and chaotic. In this article, we find out the causes of the blue screen. Also, let's talk about how to remove the blue screen in Windows 10 and eliminate the problem.

Causes of windows 10 blue screen appearance

Possible causes due to which a blue screen appears, quite a lot. Among them:

1. malicious programs and viruses;
2. incompatibility or incorrect operation of devices drivers;
3. damage system files operating system;
4. unsuccessful updates of the Windows 10 operating system;
5. simultaneous use of several antivirus programs;
6. invalid BIOS settings (including overclocking);
7. overheating (processor, video card, bridge / chipset);
8. incompatibility of components (for example, memory modules between themselves);
9. computer components hardware fault (for example, broken sectors on the hard disk when the BAD sector appears in the storage area of \u200b\u200bsystem files).

Incidentally, because of such a number of factors, there is no simple and universal solution to remove the blue windows screen 10.

How to disable Windows 10 reboot with a blue death screen

In most cases, after the appearance of BLO, the computer will soon reboot and the user does not really have time to read what was written. You can try to disable the reboot (of course, if you catch the BLO screen before loading the Windows graphic shell, then this will not work).

So, if your system is loaded and able to work for a while, then:

• Click Win + Break.
• Click Additional system parameters.
• On the tab Additionally In the section, click Parameters.
• Uncheck the checkbox Perform an automatic reboot:

It will allow you to carefully view detailed information about the error and search decision on concrete problem On the Internet by the name of the failed module or stop code. Often the failure causes nvlddmkm.sys modules, ntoskrnl.exe, fltmgr.sys. Stop codes look like this: system_thread_exception_not_handled, page_fault_in_nonpaged_area, etc.

How to remove the blue Windows 10 screen

In order to solve the problem, you need to check your computer on items. We have placed actions in this way not by chance. We took into account two factors: the most frequent causes of the blue screen and the ease of execution of the solution. If the item does not help - proceed to the following. Sooner or later you will find the cause of BSOD.

Removing viruses and malicious programs

This item is not accidentally listed first. Nowadays, malware is so widely distributed and is actively moving away with the help of cheating on the Internet, which check the computer to viruses is needed primarily. Many people were surprised when the problem with a blue screen disappeared after removing Malware. In most cases, it is enough to check the computer by the programs: and.

Removing malicious software to get rid of the blue screen

Secure network support mode

Important! In some cases, the blue screen does not allow neither to complete the check, neither download the antivirus. In this case, immediately after download, try to quickly open the properties of the system and select the download type "Safe Mode with Network Support": after which you can restart the PC as quickly as possible until it has fallen into the blue screen. When infected with malicious software with a secure network support, you will download you to download the antivirus, scan and remove malware.

System rollback - Windows 10 recovery

If you have noticed exactly when the blue screen appeared for the first time, try to roll back the system. To do this, you can use either the built-in function "", or backup imageexecuted by the Acronis program Aomei Backupper., Ghost or any other, if you have such.

I want to add that often the blue screen appears after installing the update for Windows 10. If you have such a case, then at first try to update the device drivers, and then try to delete the update. And another remark: If you have done the system recovery, then re-check the PC to viruses and check the integrity of system files. This is the case if in a backup, from which you recovered, there were already viruses or Windows errors.

If BSOD occurs during the system loading process or pops up too quickly after loading, so that it is impossible to do anything with a computer, it will be written below in a separate paragraph.

Windows Drivers Update

If, when the blue screen appears, the name of the module that caused the error is specified, look for information on the Internet about what is for the file. For example, if you found out that the failure gives the network card driver component, start from the search for the updated version:

At the same time, do not rely one hundred percent on the drivers that Windows 10 downloads and installs yourself. In most cases, they work normally, but sometimes it happens that the Microsoft database driver is "simplified" or "universal", reducing productivity or causing problems in the system. Visit the official website of the manufacturer of your iron (laptop, motherboard, video card) and check whether there is an official driver for Windows 10. If it is available, then download the latest version and install.

Sometimes it helps the opposite action: rollback of drivers (i.e. installation previous version Drivers, if a newer is a blue screen).

Reset Windows 10 or net reinstalling system from flash drive

Described how to make reset Windows 10. A - about how to reinstall the operating system from the flash drive.

Search for the reason for the appearance of the blue screen in the hardware

If you did not help even reinstalling Windows 10, you need to check the service components. All must be checked: the voltage issued by the power supply; Contacts on the motherboard; SATA integrity cables; Correction of hard drives and SSD.

• Test RAM using the program. By the way, it also helps to identify the banal incompatibility of the RAM modules among themselves, when each level of memory works normally, and together they call BSOD, hanging or rebooting the computer.
• If your Windows 10 is installed on hDDCheck it with a program for broken sectors. Bad sectors can be tried to "heal" and the system can again become operational. After that, you can save data and think about replacing an unreliable drive to a new one.
• Remember whether you accelerated the system. If acceleration occurred, return the settings that you changed to the same values. Instead, you can reset the BIOS settings to the default values, but it should be done carefully, because The computer can stop loading.
• Remember whether you switched the mode of operation of the hard disk between AHCI, RAID, IDE. If you simply switch the mode and do not replace the driver, you will receive a blue screen when loading and the computer will cyclically reboot. If you change this setting, return the same value.
• check the temperature of the processor, chipset, video cards in the BIOS or using utilities (for example, AIDA64 or).
• The cause of the blue screen of death can be a burnt network card. It often happens after the thunderstorm. At the same time, the activity indicator on the network adapter may flash, simply no internet connection. We advise special attention to pay for this item if your computer is connected to the Internet to the provider directly - without Router. First, simply disconnect the Ethernet connector from the network adapter and restart the computer. If the blue screen stopped popping up, remove network card And replace it with a new one. If such a problem happened with an interjected Ethernet adapter, disconnect it in UEFI (BIOS).

Blue Windows 10 screen appears when running a specific program or in the game

In my practice there were cases when the blue screen popped out only when downloading torrent or only in the game. In the latter case helped to set a small memory dump:

Also, you can try to update the "problem" program to the latest version or delete it at all.

What to do if the blue screen occurs in the system loading process

If in your case the blue screen occurs during windows downloads 10 or a few seconds after entering the account, it is obvious that you will not have time to download the antivirus, nor set the download in safe mode. In this case, we advise first to check the computer to viruses with, or any other bootable media with antivirus. Then create a bootable USB flash drive from Windows 10, boot from it and select item System Restore:

After that, you usually have two options:

1. Run the recovery of the system and roll back to the recovery point (if any);
2. Make a reset of Windows 10 to initial state. Read more about it in.

Also, it is worth saying that after several emergency reboots, the system can offer you to start recovery when loading. You can choose Restoration and then in the section Additionally choose System Restore. In some cases, it helps to return Windows into an efficient state and you will not need to create the above-mentioned loading flash drive. By the way, after restoring the system, this way do not forget to check the computer for viruses.

Way to solve a problem for advanced users

Experienced users I can offer another method for finding the causes of the blue screen of death in Windows 10. You need to install the BlueScreenView program to view the dumps and carefully study them. In many cases, it helps to find out in which direction to dig to eliminate the problem. For example, if when analyzing it is clear that the critical error calls the driver - to replace it, and if the failure is clearly connected with hard disk, then change the cable or try to disable the device. Detailed visual instructions for working with BlueScreenView can be found on YouTube.

Summary

So, in order to remove the blue screen of death in Windows 10, follow these steps:

• Check the PC to viruses using the recommended utility.
• If the BSOD appeared after installing the update - delete this update. Subsequently, you can create backup Systems and try to set this update again.
• Make sure the system is installed latest versions Drivers certified to work with Windows 10.
• If you added components - remove.
• If you changed the settings - return the previous one. This concerns both the programs and the UEFI / BIOS settings.
• Test the disk and memory for errors and hardware faults.
• Disconnect the cable from the network adapter (or remove the card if it is external).

If in Windows install a driver, which for some reason (lack of compatibility with the version of the operating system, conflicts with other software, etc.) refuses to function properly, the operation of the system will usually be unexpectedly completed with a critical STOP error ( She is the "blue screen of death" or just bsod).

Today we will look at one of the ways to eliminate the error. Driver_irql_not_less_or_equalWhen the appearance occurs, this message appears on the display:

There was a problem on your PC, and it must be reloaded.

If you wish, you can find on the Internet information on this error code: driver_irql_not_less_or_equal (Epfwwfp.sys).

The EPFWWFP.SYS value in the message indicates the name of the driver that caused this error. Knowing title faulty Driver, just remove it enough (and if there is such a set more new version), And then the problem will be solved. Here's how to do it:

1. Load in Wednesday windows restoration. To do this, click "Restart" by clicking and holding the SHIFT key. If the error occurs at the operating system loading phase, then get into the recovery environment can using the installation disk or using.

2. Once in the recovery environment, click "Diagnostics"\u003e "Advanced Parameters"\u003e "Command Line". By this you run the command line preparation.

3. Select the administrator account and enter the password. account.

The next step will be the definition of the letter of the section on which the system is installed. This is important, since the letter labels of the disc partitions in the boot medium differ from those used in the operating system.

4. So, in the command line window, type the command notepad. And press ENTER. After the "Notepad" opens, go to the "File" menu -\u003e "Save As". As a save directory, specify "this computer". In the "Explorer" you will see discs and the letters assigned to them. Most likely, the letter C will be labeled a reserved area, and the letter D, which is usually assigned to the user partition will be marked with the system. In our case, all that is the way - the operating system is set to the section that the letter D was assigned in the boot medium.

5. Now go back to the command line by closing the "Explorer" and "Notepad". Enter the following command and press ENTER:

Del / F / S / Q / A "D: \\ Windows \\ System32 \\ Drivers \\ < NAME Drivers> "

Do not forget instead of D: specify the letter of your system partition, and instead<НАЗВАНИЕ ДРАЙВЕРА> Enter the name of the defective driver (for example, EPFWWFP.SYS).

6. Close command line And boot the operating system.

Now, when problem driver It was removed, the "blue death screen" should not be more. Next, you need to install the updated version of the driver, but for this you have to find out more detailed information about it.

7. Visit the online directory of the drivers created by users and Microsoft specialists. On the directory page, find the name of the defective driver. In our case, the cause of the error was the EPFWWFP.SYS driver required to work ESET Personal Firewall.

You need to do this as follows: Finding out the name of the program / device, whose driver was the cause of the problem, go to the site of the appropriate manufacturer / developer and download and install a newer version of the driver / program, if any.

Excellent day!

Blue Death Screens (or BSODs) is the eternal problem of all PC users, and now we will look at one of these BSODs - System_Service_Exception. This critical failure can gave a visit to the user quite suddenly, whether it is during the game in some kind computer game or during simple use operating system.

Most often, the cause of the critical error System_Service_Exception is the device drivers that for some reason began to function incorrectly, which led to a known result. However, sometimes BSOD System_Service_Exception can be caused by other reasons:

• failures in the operation of RAM;
• incorrect BIOS settings;
• hard disk problems;
• overheating of computer equipment;
• single failure in the operation of the operating system;
• etc.

On the System_Service_Exception of the System_Service_Exception of the Death Screen screen you can see the following information:

There was a problem on your PC, and it must be reloaded. We only collect some error information, and then you can reboot.
If you wish, you can find on the Internet information on this error code: System_Service_Exception

This BSOD can appear on a variety of versions of Windows operating systems, but we will concentrate on solving a problem for Windows 10 users, as it is currently the most relevant. However, you can apply the following methods for other versions of Windows.

Critical Error System_Service_Exception: Solution Methods

If there is a BSOD on your computer with the System_Service_Exception code, and you immediately rushed to the network for effective methods Solutions, then we recommend that you do not panic and apply the most basic, even a banal method - rebooting the computer.

Yes, just reboot your computer and see if the System_Service_Exception will fail once again. You see the operating system - the thing is not simple, and in it from time to time there are random errors, failures, departures, bugs and other troubles that are often treated with the simplest reboot.

Method number 2 BIOS Reset Settings

BIOS is another one possible reason The occurrence of the critical error System_Service_Exception on Windows 10. Perhaps you recently dig in bIOS settingsExperimed with them to create the best experience for themselves. Among other things, it also happens that the BIOS settings may change by themselves as a result of anything. You need to go to the BIOS and set the default settings in it.

On different motherboards, access to the BIOS can be obtained. different ways. For example, in some cases, you can log in with the help of timely pressing the DEL button when the PC is started. There are also other keys, for example, F10, F2, various key combinations, etc. In fact, before logging in the system, a hint will appear on the screen, which will give you to know which keys for what is responsible. You can also find information on the Internet on your mother card, in which it will definitely be indicated how to go to the BIOS.

Going to the BIOS, you will need to find a section responsible for restoring settings. Unfortunately, as in the case of the input, you will have to find this section yourself, since each BIOS has its own user interface. Usually, this section will perform under the name "Reset Bios Settings", "Restore Configuration" or something like that. Reset the settings, and then try to enter the operating system. If the case was considerable incorrect settings BIOS - BSOD System_Service_Exception should have disappeared. However, if he still manifests himself, let's move on.

Method number 3 Reinstalling RAM

The title of this method can and sounds extremely strange, then this is exactly what we will deal with you now. System_Service_Exception could arise due to failures in the work of RAM planks. Sometimes, recovering the correct operation of the RAM is managed using a simple rearrangement of it in motherboard. So, completely disconnect your computer from the power, and then open system unit.

Remove the RAM bar from the slots. Pull the slots for the RAM on the motherboard, wipe the operational memory contacts by a widder, lightly moistened in alcohol (you can also rub the grater), and then insert them back into the slots. Try to start the computer again and enter the Windows 10 operating system. Some users helps this adviceBut if he did not work for you, then let's go to another method.

Method number 4 Check availability of available updates for Windows 10

Some users on the Internet claim that they managed to get rid of the System_Service_Exception failure using the installation of updates for its operating system Windows 10. If you can bypass the blue screen of death and log in, then it is much easier to cope with this task.

So, press the left mouse button on the start and select "Parameters". Opening the window with the parameters, open the section called "Update and Security". Next, go to the "Center" tab windows updates" And finally, click on the "Update Verification" button.

Wait until the system checks available updates, loads and install them. After installing updates, restart the computer and check the presence of BSOD. If new updates did not help in System_Service_Exception, go to the following method.

If you can't access your system, you can try to update Windows 10 through secure mode with network drivers. So, restart your computer, and then clamp the F8 + SHIFT key on the keyboard to enter the download parameter menu.

You will have a list of different options. You need an option called "Enable Safe Loading Mode network drivers" After selecting this option, you download your system in safe mode with internet access. Now execute "Parameters → Update and Security → Windows Security Center → Check for updates".

Method number 5 Deleting a problem driver

As we said at the very beginning of the article, incorrectly working drivers are the main reason for the appearance of the blue System_Service_Exception death screen. If the problem is really the driver, then the logical step will be deleted from the system, which will restore its stability, right?

Yes, everything is so, but then another question arises: how to determine which driver causes problems? Answer - BlueScreenView. The program called BlueScreenView is able to view the memory dumps of the system that were created after the occurrence of a critical failure in it. It is in the cream-dump and will be located we need information about the driver-culprit.

Download BlueScreenView You can completely calmly from the developer's official website. The program is extremely small and it does not even require any installation into the system; Launched the executive file and made the case you need. So, download it to the system.

The note: If you can not log in to Windows, then go to secure mode with downloading network drivers. There is a chance that the program will refuse to start in this mode, but it's still worth trying.

Usually, in the operating system, the default parameters are set automatic creation Minidasters of memory. In these dumps, it is not a complete set of memory at the time of the critical failure, but, as a rule, it is enough to determine the driver.

Run the BlueScreenView utility. It immediately scatters your Windows for the presence of minidambles available in the standard location (% Systemroot% \\ minidump) in the system. If the blue screen of death System_Service_Exception is your first critical failure, you will see one memory dump and you do not have to choose. If not the first - find the desired dump and click on it.

First, you should pay your attention to the column next to the top of the program window called "Caused by Driver", which is translated as "caused by the driver." It is in this column that will be the driver that caused the appearance of a blue System_Service_Exception death screen. Record it somewhere in the future to find more information about it.

You should not close the BlueScreenView Utility window. Pay your attention now to low part Program window. In it you will see a list of files that are also related to the process of the appearance of the blue System_Service_Exception death screen. We recommend that you write down anywhere in the list marked with in red, as well as having an extension. SYS.

Once you collect the necessary information, thug out the name of the driver located in the "Caused by Driver" column. For example, if you find that this file is a driver from NVIDIA, the solution is quite simple - reinstalling drivers for the video card. The same approach applies to all other drivers. You can update the drivers using installers from developers or using automatic installation Through device manager.

Method number 6 Checking the temperature of computer components

It is believed that the blue screen of death System_Service_Exception can be caused by the considerable overheating of your computer hardware. Know that strong equipment overheating can lead the entire system to extreme instability.

The easiest way, check the temperature of the computer using specialized programs from third-party developers. For example, you can use such utilities as AIDA 64, Speedfan, Hwmonitor, Core temp, Speccy, GPU-Z, Real Temp and many, many others.

As you can see, you have a huge arsenal of all sorts of softwarecapable of measuring the temperature of your equipment. If you realize that overheating is really happening in your system, then, most likely, they are they calling the System_Service_Exception critical error. Eliminate overheating and the problem will disappear by itself.

There is a huge number of ways to reduce the temperature of the components of the PC: improving the passage of the air flow in the system case or the laptop housing, cleaning the system unit from dust, replace the thermal paste on central processor and a graphic accelerator chip, installation on a video card and processor, more powerful cooling systems, setting more powerful coolers to the system unit and even reduction of operating frequencies of some equipment.

Method number 7 Software Verification RAM

Remember how multiple methods ago were we taken out and inserted into the motherboard the RAM bar? It was one of the RAM test methods, with which you can fix small problems in its work. But what if your rAM Does much more serious problems? If it works with failures, what causes the System_Service_Exception error?

We recommend that you check your RAM using the MEMTEST86 + specialized utility. This utility will automatically check your operational for errors and failures when working. Most the best way Starting MemTest86 + is the creation boot flash drive With this program. Implement it is very simple, and now we will deal with this issue.

First you need to download the automatic program installer for the USB media. After downloading the archive with the program, locate your computer to your computer. Remove the "Memtest86 + USB Installer.exe" file and archive and place it where it will be convenient for you, for example, on the desktop.

Run the MEMTEST86 file + USB Installer.exe. In the Installer window, you will need to specify the path in the connected flash drive, and then press a couple of buttons to start the utility installation process. After completing the preparation of the flash media, let's now run the MEMTEST86 + utility itself.

With a still connected flash drive, restart the computer and go to the settings of your BIOS (we have already discussed, how to enter them in the previous paragraph of the article). You need to set the first flash drive in the priority of downloads. Find the BOOT section in Bios, or something like that, set out the flash media in priority, and then your disk and save the changes.

Restart the computer, after which it will automatically download the MemTest86 + program from the flash drive. The process of checking RAM will be fully automatic, so you don't even do anything. Checking RAM may be ordered to delay, so bring patience and wait for it.

As soon as Memtest86 + completes its work, you will be given a summary. It is quite simple with your rapid memory to understand that with your operational memory. If you see a bunch of lines marked with red, then your RAM is definitely working with failures and errors.

Unfortunately, if all the positions of memory with memory have not acquired the most rainbow shades, then, in most cases, the fading bar of the RAM should be removed from the system. As soon as you do it, critical error System_Service_Exception will have to disappear.

Method number 8 Check hard disk

Think about whether you have not disconnectedly sharply electricity during the time you performed some tasks with a hard disk, such as writing or moving files? Sudden power failure while working hard disk May cause the appearance of the so-called BAD sectors, which make it difficult to read the data located in them. Among other things, the Bad blocks could arise due to physical disk damage.

Restore the disk file system is possible using this utility as Victoria HDD. It scatters your hard disk for the presence of a Bad sector, after which you can try to fix them. However, it all depends on the state of your hard disk. Use Victoria HDD unprepared users will be extremely difficult, as the process is quite integrated and painstaking. To describe how to use Victoria HDD, one more article is needed, and more precisely - manual.

We strongly recommend that you search for reliable guidance on the use of this truly valid program, as it will definitely help correct your hard disk if something is really wrong with it. Restore the disk and bsod system_service_exception will be corrected.

Method number 9 Restoration of the system using the recovery point

Perhaps the System_Service_Exception has appeared due to some changes in the system settings or installed software. You need to try to return your Windows 10 to the state in which it was stable. It is possible to implement it through the usual recovery of the system using the recovery point.

There is nothing easier than to restore its system with this method. Go to the operating system (also works with safe mode). Click on the keyboard, the Windows + S key combination to trigger the search string. Enter the "Control Panel" request to it and select the result found.

Switch to the display mode of large icons and select the "Restore" section. Next, click on the "Running System Recovery" item and click on the "Next" button in the window that opens. Select the point you need to restore the system and click "Next". And finally, click on the "Finish" button and wait for the process of recovering the system. Check if BSOD System_Service_Exception will appear.

Method number 10 Resetting the operating system

Nothing of the above did not help you get rid of the blue System_Service_Exception death screen (plus, the RAM and the hard disk were not caused by the emergence of the problem). It remains for us to advise you only one method, which should definitely correct BSOD, is to reinstall the Windows 10 operating system. Yes, unfortunately, this is the only one option at the moment. Installation of a clean OS with 99% probability will save you from System_Service_Exception, and then you can continue to use Windows 10 normally.

OS installation is performed quite easily and in semi-automatic mode. You just need to create an installation disk with Windows 10 for yourself, and then boot through it, then just follow the instructions on the screen. Many new users are afraid to reinstall Windows, but there is nothing to be afraid, since everything you need will be indicated on the screen. "Creating an installation media for Windows" is a special article from Microsoft, which will help you in windows installation 10.

We hope that this article helped you in solving the blue System_Service_Exception death screen.

Found a typo? Highlight the text and press Ctrl + Enter

There was a problem on your PC, and it must be reloaded. And got the best answer

Answer from Flames Peevski [Guru]
Yegor You bought a laptop with a pre-installed system. Money paid.
My tip Deliver a laptop back to the store. I do not need to be bathed with installation, with hardhams. It is clear that uncomfortable. They advise the system to another disk as if you have another hard and that for laptops. You can install a new system. Download original image or assembly from torrent. But it must be activated later. The key then you do not. And then deprive the guarantees. Most likely the hardware.
And by the way, when did you start the laptop, you have already installed or the installation went when you first turn on the laptop ????

Answer from Nikolai Valerevich[guru]
Well, it is unlikely that this equipment is hardly so I think the system will help

Answer from Switch[guru]
Try to put the system to another hard drive. And save and reveal the guarantee, from where the legs grow from a malfunction. By the way, it seems to failure in RAM.

Answer from Vladimir Kochetov[guru]
You can try to download any Live CD / USB Linux, if it is loaded normally, it means everything is fine with the gland, then pick the system.

Answer from Max 506907.[active]
Windows 8 - Court Lynch!
Take care of your files! You do not know which of them new system From Microsoft, deems "non-license", unwanted, that is, not relevant Microsoft requirements. All folders and files to which a new operating system has access, that is, has the right to access at the level of reading system, are checked as a programmatic manual. What data and programs are allowed to use when working with the Windows 8 operating system, and which no, about that Microsoft is silent, as well as about its "partisan" way to combat compliance with copyright and industrial law. If you fail your data in the form of files and folders, Microsoft requirements, such files and data will be destroyed, despite the fact that with respect to the Microsoft legal entity they are someone else's property. The operating system is displays, especially in the absence of access to removal to undesirable, according to Microsoft censorship, user files. How does this manifest? When the computer is turned off staffingThe screen will appear the blue color window of the following content. "🙁 The problem arose on your PC, and it must be reloaded to reboot. We only collect some error information, and then the reboot will be automatically performed (performed ...%). " I advise you not to wait until it is fulfilled, and immediately turn off the computer or pull the USB connector if your data is on a USB disk. Files and folders on disks and folders in user directories, it is desirable to copy the way another operating system to another disk, otherwise you will lose them. I will explain on the example, connecting your own data using a USB disk. This method of connecting devices with data on different physical media by a connecting cable shares data to yours and those belong to the operating system. USB drive is exactly yours, and the data on it too, for sure your! For representatives and workers legal entity Microsoft This data is someone else's property to which they do not have the right to encroach. So, instead of shutdown, after a system-issued alert (text, see above), your computer, after a while, when "100% completed," will reboot, and at first glance, the system will work normally. BUT! Check your files and data. You are missing them. A number of folders can lose access rights, and the files that the Microsoft program on the censorship of user data on its computer will rate as unwanted, they will simply disappear. I, for example, disappeared, retro music files, which clearly cannot have licenses and owners, and distributed in free access, has been closed access to a row boot files On my disk, as well as, the system, the action of the clock gadget is discontinued - to research in Microsoft. That's not all. Operating system support center, "hangs" flag with a message that file system On your USB disk, is spoiled, and it should be checked by the tools of the operating system. If you agree, then access to your data will stop. If you do not agree and ignore the support center message, then the subsequent shutdown and reboot will result in the same result, and in addition, access to downloaded programs will begin to stop, and later yours new Windows 8, "will order for a long time." The user, begins to fight with malicious codes - viruses, contact specialists in the Internet forums about the above-described "death" window, temporarily appearing on your computer, completely forgetting that all the troubles began with this window - Microsoft warnings. So you will learn that you not only bought the right to install and use the Windows 8 operating system by the owner, but also transferred their right to personal property in in electronic format, other owner and right owe